Century PTAC15H130A Packaged Terminal AC HP Instruction Manual

Century PTAC15H130A Packaged Terminal AC HP

Specifications:

• Model: Packaged Terminal AC/HP
• Usage: Hotels, motels, apartments, office buildings, schools, nursing homes, etc.
• Cooling Capacity: 7,000 to 15,000 BTUH
• Heating Source: Electric Heat
• Control: On-board control panel or wired/wireless remote thermostat
• Features: Cooling only with electric heat (PTAC) and Heat pump with electric heat (PTHP)

Product Usage Instructions

Installation:

These units are designed for quick installation in most 16 x 42 wall sleeves. Follow the installation instructions provided in the manual for new constructions or replacements.

Control Options:

You can control the unit using the on-board control panel or a wired remote thermostat. An adapter for the thermostat is included for easy setup. Wireless thermostat or front desk control options are also available.

In-Room Control:

Use the touchpad on the unit to control all functions easily. LEDs indicate mode, fan operation, unit status, and setpoint.

Maintenance:

Regularly clean and maintain the unit as per the maintenance guidelines provided in the manual to ensure optimal performance.

FAQ

Q: What is the warranty coverage for the product?

A: The warranty includes 5 years on the compressor and 5 years on parts. For more details, refer to the warranty document or visit www.century- hvac.com.

Q: Can this unit be used in both cooling and heating modes?

A: Yes, the unit is available in both cooling only (PTAC) and heat pump with electric heat (PTHP) versions, providing both cooling and heating functionalities.

Q: How can I control the unit remotely?

A: You can set up the unit for wireless thermostat or front desk control using an easy-to-connect interface for remote control options.

Our 42” packaged terminal air conditioners and heat pumps provide year ’round comfort, room by room, for hotels, motels, apartments, office buildings, schools, nursing homes and more. Designed for quick installation in most 16″ x 42″ wall sleeves, they’re great for new construction as well as replacements. Combining attractive appearance with state-of-the art technology, these units minimize energy usage while ensuring guest comfort. Available in cooling only and heat pump versions, all models include electric heat as standard. For installation flexibility, the unit is designed to be controlled either by on- board control panel or by a wired remote thermostat. A plug-in adapter for this thermostat is included. The unit can also be set up for a wireless thermostat or front desk control with easy-to-connect interface. All functions of the unit can be controlled in-room using the easy-to-understand touchpad. LEDs correspond to mode and fan operation, indicating unit status, and the setpoint

FEATURES

• Standard Efficiency —Provides energy efficiency and economy of cost in a streamlined and attractive modern design showcasing state-of-the-art features.
• Environmentally Friendly— Our packaged terminal units come charged with the environmentally friendly R-32 refrigerant
• Room Freeze Protection —When the unit senses temperatures 50°F or lower for three minutes, heat pump models automatically activate the heating mode
• Versatile Configuration —The unit can be optimized to a specific application through the use of dipswitches and the digital keypad; selections include setpoint limiting, front desk control, wall thermostat control, and more
• Quiet Operation —Indoor sound reduction is achieved through the unit’s two permanently lubricated fan motors; compressor has rubber grommet mounting
• Fresh Air Control Arm —Allows outdoor air into room through filtered vent, 85 CFM
• Easy To Service —On-board computer diagnostics help prolong the life of the unit and simplify service; LED indicator flashes error codes
• Seacoast models —with corrosion resistant components, see specifications inside

Warranty
5 years on compressor, 5 year on parts
See warranty document for details or visit www.century-hvac.com

MODEL NOMENCLATURE

PERFORMANCE AND ELECTRICAL DATA

208/230V COOLING ONLY WITH ELECTRIC HEAT

FEATURE| PTAC07H130A| PTAC09H130A| PTAC12H130A| PTAC12H150A| PTAC15H130A| PTAC15H150A
---|---|---|---|---|---|---
Cooling BTUH| 7,200/7,300| 9,000/9,200| 11,800/12,000| 11,800/12,000| 14,500/14,700| 14,500/14,700
EER| 13.1| 11.3| 10.7| 10.7| 10.6| 10.6
Cooling Amps| 3.1/3.4| 4.3/4.9| 5.5/6.1| 5.5/6.1| 7.5/8.9| 7.5/8.9
Max. Current Amps| 3.6| 5.2| 7.7| 7.7| 11.0| 11.0
Cooling Watts| 550/560| 780/790| 1,060/1,080| 1,060/1,080| 1,370/1,390| 1,370/1,390
Electric Heater kW @ 208/230| 2,150/2,580| 2,150/2,580| 2,897/3,500| 4,100/5,000| 2,897/3,500| 4,100/5,000
Elec. Heat BTUH @ 230V| 7,800| 7,800| 10,900| 15,000| 10,900| 15,000
Power Cord| LCDI (6-15P)| LCDI (6-20P)| LCDI (6-20P)| LCDI (6-20P)| 6-20P| 6-20P
Airflow CFM| 346| 430| 432| 432| 431| 431
Indoor Sound Max dB(A)| 51| 50| 52| 52| 51| 51
Out. Sound Max dB(A)| 67| 63| 67| 67| 65| 65
Net Wt./Shipping Wt.| 98/107| 97/106| 104/113| 104/113| 106/115| 106/115

208/230V HEAT PUMP WITH ELECTRIC HEAT

FEATURE| PTHP07H130A| PTHP09H130A| PTHP12H130A| PTHP12H150A| PTHP15H130A| PTHP15H150A
---|---|---|---|---|---|---
Cooling BTUH| 7,100/7,200| 9,200/9,300| 11,800/12,000| 11,800/12,000| 14,500/14,700| 14,500/14,700
EER| 13.1| 11.4| 10.5| 10.5| 10.6| 10.6
Cooling Amps| 3.0/3.3| 4.2/4.6| 5.3/5.8| 5.3/5.8| 6.5/7.4| 6.5/7.4
Max. Current Amps| 3.6| 5.2| 8.0| 8.0| 11.0| 11.0
Cooling Watts| 540/550| 810/820| 1,020/1,040| 1,020/1,040| 1,370/1,390| 1,370/1,390
Heat Pump BTUH| 6,000/6,200| 7,900/8,100| 10,500/10,800| 10,500/10,800| 13,200/13,500| 13,200/13,500
C.O.P. @ 47°F| 3.60| 3.40| 3.20| 3.20| 3.20| 3.20
Heating Amps| 2.6/2.7| 3.9/4.3| 5.0/5.3| 5.0/5.3| 6.0/6.4| 6.0/6.4
Heating Watts| 460/480| 690/720| 850/890| 850/890| 1,120/1,170| 1,120/1,170
Electric Heater kW @ 208/230| 2,150/2,580| 2,150/2,580| 2,897/3,500| 4,100/5,000| 2,897/3,500| 4,100/5,000
Elec. Heat BTUH @ 230V| 7,800| 7,800| 10,900| 15,000| 10,900| 15,000
Power Cord| 6-15P| 6-20P| 6-20P| 6-20P| 6-20P| 6-20P
Airflow CFM| 355| 364| 439| 439| 417| 417
Indoor Sound Max. dB(A)| 51| 50| 52| 52| 53| 53
Out. Sound Max dB(A)| 67| 64| 67| 67| 67| 67
Net Wt./Shipping Wt.| 102/111| 100/108| 111/119| 111/119| 114/123| 114/123

DIMENSIONS

OPERATING VOLTAGE

UNIT DIMENSIONS
42” W • 16” H • 21.1” D (without sleeve)

OPERATING VOLTAGE

PERFORMANCE AND ELECTRICAL DATA

208/230V COOLING ONLY WITH ELECTRIC HEAT—SEACOAST MODELS

FEATURE| PTAC12H130ASC| PTAC12H150ASC| PTAC15H130ASC| PTAC15H150ASC
---|---|---|---|---
Cooling BTUH| 11,800/12,000| 11,800/12,000| 14,300/14,500| 14,300/14,500
EER| 10.8/10.5| 10.8/10.5| 10.0/10.2| 10.0/10.2
Cooling Amps| 5.4/5.1| 5.4/5.1| 7.0/6.4| 7.0/6.4
Max. Current Amps| 7.3| 7.3| 8.9| 8.9
Cooling Watts| 1100/1140| 1100/1140| 1450/1470| 1450/1470
Electric Heater kW @ 208/230| 3.0| 5.0| 3.0| 5.0
Elec. Heat BTUH @ 230V| 10236| 17060| 10236| 17060
Dehum. Pts/Hr| 2.32| 2.32| 3.59| 3.59
Power Cord| 20A 6-20 P| 30A 6-30 P| 20A 6-20 P| 30A 6-30 P
Airflow CFM| 405/333| 405/333| 405/370| 405/370
Indoor Sound Max dB(A)| 48/42| 48/42| 48/45| 48/45
Out. Sound Max dB(A)| 66| 66| 66| 66
Net Wt./Shipping Wt.| 108/121| 108/121| 112/126| 112/126

208/230V HEAT PUMP WITH ELECTRIC HEAT—SEACOAST MODELS

FEATURE| PTHP12H130ASC| PTHP12H150ASC| PTHP15H130ASC| PTHP15H150ASC
---|---|---|---|---
Cooling BTUH| 11,800/12,000| 11,800/12,000| 14,300/14,500| 14,300/14,500
EER| 10.6/10.5| 10.6/10.5| 10.0/10.2| 10.0/10.2
Cooling Amps| 5.4/5.1| 5.4/5.1| 6.8/6.3| 6.8/6.3
Max. Current Amps| 7.3| 7.3| 8.9| 8.9
Cooling Watts| 1100/1140| 1100/1140| 1400/1420| 1400/1420
Heat Pump BTUH| 10,800/11,000| 10,800/11,000| 13,200/13,600| 13,200/13,600
C.O.P. @ 47°F| 3.50/3.30| 3.50/3.30| 3.30/3.30| 3.30/3.30
Heating Amps| 4.5/4.2| 4.5/4.2| 5.6/5.2| 5.6/5.2
Heating Watts| 900/950| 900/950| 1155/1180| 1155/1180
Electric Heater kW @ 208/230| 3.0| 5.0| 3.0| 5.0
Elec. Heat BTUH @ 230V| 10236| 17060| 10236| 17060
Power Cord| 20A 6-20 P| 30A 6-30 P| 20A 6-20 P| 30A 6-30 P
Dehum. Pts/Hr| 2.32| 2.32| 3.59| 3.59
Airflow CFM| 405/333| 405/333| 405/370| 405/370
Indoor Sound Max. dB(A)| 48/42| 48/42| 48/45| 48/45
Out. Sound Max dB(A)| 66| 66| 66| 66
Net Wt./Shipping Wt.| 110/123| 110/123| 112/126| 112/126

For installations in or near coastal locations, 12,000 and 15,000 BTUH models are available in a “Seacoast” version built to withstand such extreme conditions. Corrosion resistant coatings are applied to components, including the condenser fins, outdoor fan motor enclosure, base pan, and back grille. Additional corrosion protection is provided by stainless steel screws and aluminum end plates. Treated outdoor sections successfully meet 48-hour salt spray test requirements, as well as anti-rust testing.
Seacoast models meet the same stringent performance specifications as all our PTACs/PTHPs, and are designated by “SC” at the end of the part number.

FEATURES

OUTSTANDING WARRANTY COVERAGE
All Century PTACs/PTHPs are covered by a one year parts and labor warranty. In addition, the sealed system and all functional parts are warranted to be free from defects in material and workmanship for a total of five years.
See our website for warranty details.

PTAC/PTHP ACCESSORIES

Breakdown Wall Sleeve
P – art No. 7602-500F – Galvanized Steel
Part No. 7602-500PF – Polymer
Our 42” wall sleeve is constructed from galvanized steel and powder coated for durability and aesthetic appeal. The wall sleeve is insulated and factory spot welded to minimize breaches in the cabinet surface. It contains four chassis mounting holes, four grille mounting holes and two drain holes for optional drain kit.

Dimensions W x H x D (inches)
42” x 16” x 147/8”

Air Deflector
Part No. 7602-508F
The PTAC Air Deflector directs air up and away from overhanging drapes. It saves energy by eliminating trapped air flow between the window and the curtain while increasing guest comfort levels. It is easy to install with no tools needed.

Sub Base
Part No. 7602-509F – Unpowered
Part No. 7602-509F-20A – 20 Amp Receptical Part No. 7602-509F-30A – 30 Amp Receptical

Made from galvanized steel and powder coated, our sub-base has only one piece, plus the skirting, for faster and more economical installation. Each kit contains: Sub-base main body, left and right side skirt, adjusting feet, and installation instructions.

Dimensions W x H x D (inches)
423/8” x 33/4” x 45/8”

Stamped Grille
Part No. 7602-501F
Our stamped grille is made from durable, light weight aluminum and made to fit a standard 42” wall sleeve. Vents match our units to facilitate proper airflow, and must used with Century® PTACs.

Dimensions W x H x D (inches)
417/8” x 153/8” x 3/8”

Architectural Grille

Part No. 7602-505F
Our architectural grille fits a standard 42” wall sleeve. It’s formed from durable aluminium for weight reduction and weather resistance and powder coated for greater durability. Louvers are connected with high tensile rods. The grille comes factory assembled and includes four attachment points and two discharge air shaping deflectors.

Dimensions W x H x D (inches)
42” x 153/4” x 13/8”

Polymer Grille
Full polymer grille with stainless steel hardware is ideal for any location where corrosion is an issue, especially coastal areas. Available in white, beige, alpine beige, and dark bronze.

Dimensions W x H x D (inches)
42” x 157/8” x 11/8”

Photos may not portray actual color.
Grilles match our units to facilitate proper airflow, and must used with Century® PTACs.

PTAC/PTHP ACCESSORIES

• PTAC Remote Control
  Part No. 7602-512
  Designed to operate with our PTAC/PTHP models, this remote controls mode, temperature, fan speed, and has timer function.
  Dimensions W x H x D (inches)
  17/8” x 5” x 1”

• Thermostat
  Part No. 7800-200 – used with PTAC Part No. 7800-201 – used with PTHP
  This thermostat is a digital, mercury free, wired, non-programmable, electronic thermostat, compatible with PTAC/PTHP models.
  Dimensions W x H x D (inches)
  41/2” x 33/4” x 11/16”

• Wireless Wall Thermostat
  Part No. 7602-536A
  This thermostat operates our PTAC/PTHP line, without the need to run control wires. Contains all basic thermostat functions.
  Dimensions W x H x D (inches)
  45/8” x 33/4” x 1”

• Lock Cover
  Part No. 7602-535
  Designed for use with duct kits, where control access is not available, or any situation where wired or wireless remote system control is desired or restricted access is required. Key access is provided for service.
  Shipping Dimensions W x H x D (inches)
  77/8” x 77/8” x 21/64”

• Drain Kit
  Part No. 7602-506F
  The drain kit, including both 90° drain tube and a 180° drain tube, can be used for either an internal or external drain and can be attached to one of two available outlets on the wall sleeve. The mounting plates are made from galvanized steel and powder coated to match the wall sleeve.

• Main Duct Kit
  Part No. 7602-511F
  The lateral duct kit contains everything needed to convert a PTAC or PTHP for heating/cooling an adjacent room. The one-piece plenum attaches to the wall sleeve with brackets (included) and fits over the unit’s air discharge grille. The extension duct can be installed for left or right side duct applications, with a maximum extension of 4 feet. Both the plenum and the duct extension are constructed of galvanized steel with a painted finish, and they are fully lined with insulation. The air volume baffle can be adjusted to allow a 75/25 to 80/20 airflow split between the primary and secondary (adjacent) rooms. In addition to the plenum, extension duct and brackets, the kit includes a wall register, wall trim kit, end cap, hardware and instructions.
  Dimensions
  Plenum: 441/16” W x 71/8” D x 71/2” H (tallest point) Extension: 475/16” W x 7” D x 31/2” H
  Wall Register: 81/2” W x 51/4” H

Due to ongoing product improvements, specifications and dimensions are subject to change and correction without notice or incurring obligations. Determining the application and suitability for use of any product is the responsibility of the installer.
Additionally, the installer is responsible for verifying dimensional data on the actual product prior to beginning any installation preparations.
Third party incentive and rebate programs have precise requirements as to product performance and certification.
All products meet applicable regulations in effect on date of manufacture; however, certifications are not necessarily granted for the life of a product. Therefore, it is the responsibility of the applicant to determine whether a specific model qualifies for these incentive/rebate programs.

PTAC models in this brochure are certified directly with the United States Dept. of Energy (D.O.E.) as meeting specifications shown.

“This product complies with all California product labeling laws including, but not limited to, the Safe Drinking Water and Toxic Enforcement Act of 1986, more commonly known as Proposition 65.”

*2024 MOTORS & ARMATURES, Inc.
MARS is a registered trademark of Motors & Armatures, Inc
Century is a registered trademark of Motors & Armatures, Inc.

1900 Wellworth Ave., Jackson MI 49203 • 517.787.2100 • www.century- hvac.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>