QUOIZEL LIGHTING MAP1728GFL Maple Contemporary Gold Leaf Overhead Lighting Fixture Installation Guide
- August 14, 2024
- QUOIZEL LIGHTING
Table of Contents
- QUOIZEL LIGHTING MAP1728GFL Maple Contemporary Gold Leaf Overhead
- Product Information
- Product Usage Instructions
- FAQ
- SAFETY INFORMATION
- TOOLS REQUIRED
- CARE AND MAINTENANCE
- PACKAGE CONTENTS
- MOUNTING HARDWARE
- INSTALLATION
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
QUOIZEL LIGHTING MAP1728GFL Maple Contemporary Gold Leaf Overhead
Lighting Fixture
Specifications
- Model Numbers: MAP5028GFL, MAP1728GFL, MAP5028EK, MAP1728EK
- Released Date: 2024-01-22
Product Information
The product comes with various components including a Ceiling Canopy, Rods of different lengths, a Fixture Body, Glass Decorations, a Crossbar, Wiring connectors, and mounting hardware.
Product Usage Instructions
Installation – Pendant (MAP5028GFL, MAP5028EK)
- Install the required Rods based on ceiling height.
- Tighten the hex nut inside the Ceiling Canopy.
- Attach Ceiling Canopy to Upper Rod.
- Install Crossbar Assembly to Outlet Box.
- Wire the fixture following color codes.
- Attach Ceiling Canopy to Crossbar Assembly.
- Install the correct bulbs and Glass Decorations.
Installation – Semi-Flush (MAP1728GFL, MAP1728EK)
- Remove Swivel if present.
- Attach Ceiling Canopy to Fixture Body.
- Wire the fixture following color codes and cut supply wires leaving a specific length.
- Install Ceiling Canopy to Crossbar Assembly.
- Install the correct bulbs and Glass Decorations.
FAQ
- Can I install this fixture on an angled ceiling?
- Yes, for angled ceilings, make sure to position the Swivel opening towards the wall during installation.
- What is the recommended bulb type and wattage for this fixture?
- The recommended bulb type is Candelabra (E12) with a maximum wattage of 60W per bulb.
- Can this fixture be used as both a pendant light and a semi-flush light?
- Yes, this fixture is convertible and can be mounted in both configurations. Do not cut supply wires if using it as a pendant light.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, install or operate the product.
- WARNING RISK OF ELECTRIC SHOCK – Before beginning installation, turn off the electricity at the circuit breaker box or the main fuse box.
- RISK OF FIRE – Use bulbs specified by the markings and/or labels on the fixture.
- CAUTION For your safety, read the instructions completely before beginning installation.
- If in doubt about electrical installation, consult a licensed electrician.
- Turn off electricity to fixture before replacing the bulb(s).
TOOLS REQUIRED
CARE AND MAINTENANCE
- Wipe clean using a soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
- If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00 am – 5:00 pm EST), or visit us online at www.quoizel.com.
PACKAGE CONTENTS
MOUNTING HARDWARE
INSTALLATION
OPTION: PENDANT 1 – MAP5028GFL,MAP5028EK
- Install Rods
- Optional Rods:
- 8 Feet Ceiling: (2) 12″L Rods.
- 9 Feet Ceiling: (2) 6″L Rods + (2) 12″L Rods.
- Tighten hex nut inside of the Ceiling Canopy
- Install Ceiling Canopy to Upper Rod
- Install Crossbar Assembly
- Wiring
- Install Ceiling Canopy to Crossbar Assembly
- Install Bulbs
- Install six correct bulbs referring to fixture markings and/or labels for maximum wattage.
- Recommended Bulb type (not included).
- Install Glass Decoration A and Glass Decoration B
IMPORTANT: This CONVERTIBLE fixture can be mounted as a pendant light or semi-flush light. DO NOT CUT SUPPLY WIRES if you intend to use it as a pendant light.
OPTION 2: SEMI-FLUSH – MAP1728GFL, MAP1728EK
Set aside (2) 6″L Rods and (2) 12″L Rods, swivel since they are not required for the semi-flush installation.
- Remove Swivel
- Install Ceiling Canopy to Fixture Body
- Cut the supply wires leaving approximately 8” of wire extending from the ceiling canopy after assembly.
- Wiring
- Install Ceiling Canopy to Crossbar Assembly
- Install Bulbs
- Install six correct bulbs referring to fixture markings and/or labels for maximum wattage.
- Recommended Bulb type (not included).
- Install Glass Decoration A and Glass Decoration B
Your installation is now complete! Restore electricity and save this sheet for future reference.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>