PHOENIX CONTACT MSTB2.5 Printed Circuit Board Connector Instruction Manual
- June 12, 2024
- PHOENIX CONTACT
Table of Contents
Printed-circuit board connector – MSTB 2,5/ 2-ST-5,08 – 1757019
MSTB2.5 Printed Circuit Board Connector
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user’s documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download)
The figure shows a 10-position version of the product
PCB connector, nominal cross section: 2.5 mm², color: green, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Female connector, number of potentials: 2, Number of rows: 1, Number of positions per row: 2, number of connections: 2, product range: MSTB 2,5/..-ST, pitch: 5.08 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, conductor/PCB connection direction: 0 °, Locking clip: – Locking clip, plug-in system: CLASSIC COMBICON, Locking: without, mounting: without, type of packaging: packed in cardboard
Your advantages
- Well-known connection principle allows worldwide use
- Low temperature rise, thanks to maximum contact force
- Allows connection of two conductors
Key Commercial Data
| Packing unit | 1 pc |
|---|---|
| GTIN | |
| GTIN | 4017918029548 |
| Weight per Piece (excluding packing) | 3.600 g |
| Custom tariff number | 85366990 |
| Country of origin | Germany |
Technical data
Item properties
| Brief article description | PCB connector |
|---|---|
| Connector system | CLASSIC COMBICON |
| Type of contact | Female connector |
| Range of articles | MSTB 2,5/..-ST |
| Pitch | 5.08 mm |
Item properties
| Number of positions | 2 |
|---|---|
| Drive form screw head | Slotted (L) |
| Screw thread | M3 |
| Locking | without |
| Number of rows | 1 |
| Number of connections | 2 |
| Number of potentials | 2 |
Electrical parameters
| Nominal current | 12:00 AM |
|---|---|
| Nom. voltage | 320 V |
| Rated voltage (III/3) | 250 V |
| Rated voltage (III/2) | 320 V |
| Rated voltage (II/2) | 630 V |
| Rated surge voltage (III/3) | 4 kV |
| Rated surge voltage (III/2) | 4 kV |
| Rated surge voltage (II/2) | 4 kV |
Connection capacity
| Connection method | Screw connection with tension sleeve |
|---|---|
| Conductor cross section solid | 0.2 mm² … 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² … 2.5 mm² |
| Conductor cross section AWG / kcmil | 24 … 12 |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 |
mm² … 2.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve| 0.25 mm²
… 2.5 mm²
2 conductors with same cross section, solid| 0.2 mm² … 1 mm²
2 conductors with same cross section, flexible| 0.2 mm² … 1.5 mm²
2 conductors with same cross section, flexible, with ferrule without plastic
sleeve| 0.25 mm² … 1 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with
plastic sleeve| 0.5 mm² … 1.5 mm²
Cylindrical gauge a x b / diameter| 2.8 mm x 2.4 mm / 2.5 mm
Stripping length| 7 mm
Torque| 0.5 Nm … 0.6 Nm
Flange specifications
| Type of locking | without |
|---|
Material data – contact
Note| WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/
JEDEC JESD 201
---|---
Contact material| Cu alloy
Surface characteristics| hot-dip tin-plated
Metal surface terminal point (top layer)| Tin (5 – 7 µm Sn)
Metal surface contact area (top layer)| Tin (5 – 7 µm Sn)
Material data – housing
| Housing color | green (6021) |
|---|---|
| Insulating material | PA |
| Insulating material group | I |
| CTI according to IEC 60112 | 600 |
| Flammability rating according to UL 94 | V0 |
| Glow wire flammability index GWFI according to EN 60695-2-12 | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 | 775 |
| Temperature for the ball pressure test according to EN 60695-10-2 | 125 °C |
Dimensions for the product
Caption| Schematische Abbildung – weitere Details siehe
Produktfamilienzeichnung
im Download Center
---|---
Length [ l ]| 18.3 mm
Width [ w ]| 10.16 mm
Height [ h ]| 15 mm
Pitch| 5.08 mm
Height (without solder pin)| 15 mm
Packaging information
| Type of packaging | packed in cardboard |
|---|---|
| Pieces per package | 100 |
| Denomination packing units | Pcs. |
General product information
| Type of note | Notes on operation |
|---|---|
| Note | In accordance with IEC 61984, COMBICON connectors have no switching |
power (COC). During designated use, they must not be plugged in or
disconnected when carrying voltage or under load.
Ambient conditions
| Ambient temperature (storage/transport) | -40 °C … 70 °C |
|---|---|
| Relative humidity (storage/transport) | 30 % … 70 % |
Ambient temperature (assembly)
Ambient temperature (operation)| -5 °C … 100 °C
-40 °C … 100 °C (dependent on the derating curve)
Termination and connection method
| Test for conductor damage and slackening | IEC 60999-1:1999-11 |
|---|---|
| Test passed |
Pull-out test
| Pull-out test | IEC 60999-1:1999-11 |
|---|---|
| Conductor cross section / conductor type / tensile force | 0.2 mm² / solid / > |
10 N
| 0.2 mm² / flexible / > 10 N
| 2.5 mm² / solid / > 50 N
| 2.5 mm² / flexible / > 50 N
Mechanical tests according to standard
| Test specification | IEC 61984 |
|---|---|
| Visual inspection | IEC 60512-1-1:2002-02 |
| Dimension check | IEC 60512-1-2:2002-02 |
| Resistance of inscriptions | IEC 60068-2-70:1995-12 |
| Insertion and withdrawal force | IEC 60512-13-2:2006-02 |
| No. of cycles | 25 |
| Insertion strength per pos. approx. | 8 N |
| Withdraw strength per pos. approx. | 6 N |
| Polarization and coding | IEC 60512-13-5:2006-02 |
| Contact holder in insert | IEC 60512-15-1:2008-05 |
| Test force per pos. | 27 N |
Air clearances and creepage distances
| Clearances and creepage distances | IEC 60664-1:2007-04 |
|---|---|
| Specification | IEC 60664-1:2007-04 |
| Minimum clearance – inhomogeneous field (III/3) | 3 mm |
| Minimum clearance – inhomogeneous field (III/2) | 3 mm |
| Minimum clearance – inhomogeneous field (II/2) | 3 mm |
| Minimum creepage distance value (III/3) | 3.2 mm |
| Minimum creepage distance value (III/2) | 3 mm |
| Minimum creepage distance value (II/2) | 3.2 mm |
Current carrying capacity/derating curves
| Caption | Type: MSTB 2,5/…-ST-5,08 with CC 2,5/…-G-5,08 P26THR |
|---|
Mechanical tests (A)
| Test specification | IEC 61984 |
|---|
Mechanical tests (A)
| Insertion strength per pos. approx. | 8 N |
|---|---|
| Withdraw strength per pos. approx. | 6 N |
| Polarization when inserted requirement >20 N | Test passed |
| Contact holder in insert requirements >20 N | Test passed |
Durability tests (B)
| Specification | IEC 60512-9-1:2010-03 |
|---|---|
| Contact resistance R1 | 1.3 mΩ |
| Insertion/withdrawal cycles | 25 |
| Contact resistance R2 | 1.4 mΩ |
| Impulse withstand voltage at sea level | 4.8 kV |
| Insulation resistance, neighboring positions | > 5 MΩ |
Thermal tests (C)
| Specification | IEC 60512-5-1:2002-02 |
|---|---|
| Number of positions | 12 |
| Upper limiting temperature requirements <100 °C | Test passed |
Climatic tests (D)
| Specification | ISO 6988:1985-02 |
|---|---|
| Cold stress | -40 °C/2 h |
| Thermal stress | 100 °C/168 h |
| Corrosive stress | 0.2 dm SO2 on 300 dm 3 /40 °C/1 cycle |
| Impulse withstand voltage at sea level | 4.8 kV |
| Power-frequency withstand voltage | 2.21 kV |
Environmental and durability tests (E)
| Specification | IEC 61984:2008-10 |
|---|---|
| Result, degree of protection, IP code | Finger safety with IP20 test finger |
Environmental Product Compliance
| REACh SVHC | Lead 7439-92-1 |
|---|---|
| China RoHS | Environmentally Friendly Use Period = 50 years |
| For details about hazardous substances go to tab “Downloads”, Category |
“Manufacturer’s declaration”
Drawings
Classifications
eCl@ss
| eCl@ss 10.0.1 | 27440309 |
|---|---|
| eCl@ss 11.0 | 27460202 |
| eCl@ss 4.0 | 27260700 |
| eCl@ss 4.1 | 27260700 |
| eCl@ss 5.0 | 27260700 |
| eCl@ss 5.1 | 27260700 |
| eCl@ss 6.0 | 27260700 |
| eCl@ss 7.0 | 27440309 |
| eCl@ss 9.0 | 27440309 |
ETIM
| ETIM 3.0 | EC001121 |
|---|---|
| ETIM 4.0 | EC002638 |
| ETIM 6.0 | EC002638 |
| ETIM 7.0 | EC002638 |
UNSPSC
| UNSPSC 6.01 | 30211810 |
|---|---|
| UNSPSC 7.0901 | 39121409 |
| UNSPSC 11 | 39121409 |
| UNSPSC 12.01 | 39121409 |
| UNSPSC 13.2 | 39121409 |
| UNSPSC 18.0 | 39121409 |
| UNSPSC 19.0 | 39121409 |
| UNSPSC 20.0 | 39121409 |
| UNSPSC 21.0 | 39121409 |
Approvals
VDE Zeichengenehmigung| http://www2.vde.com/de/Institut/Online-Service/VDE-
gepruefteProdukte/Seiten/Online-Suche.aspx
---|---
Nominal voltage UN| 250 V
Nominal current IN| 12:00 AM
mm²/AWG/kcmil| 0.2-2.5
CSA| http://www.csagroup.org/services-industries/product-listing/|
LR13631-2585950
---|---|---
| B| D
Nominal voltage UN| 300 V| 300 V
Nominal current IN| 15 A| 10:00 AM
mm²/AWG/kcmil| 28-12| 28-12
IECEE CB Scheme| http://www.iecee.org/
---|---
Nominal voltage UN| 250 V
Nominal current IN| 12:00 AM
mm²/AWG/kcmil| 0.2-2.5
cULus Recognized| http://database.ul.com/cgi-
bin/XYV/template/LISEXT/1FRAME/index.htm | E60425-19931011
---|---|---
| B| D
Nominal voltage UN| 300 V| 300 V
Nominal current IN| 15 A| 10:00 AM
mm²/AWG/kcmil| 30-12| 30-12
Accessories
Insertion bridge – EBP 2- 5 – 1733169
Insertion bridge for connectors with 5.0 mm or 5.08 mm pitch
Cable housing
Cable housing – KGG-MSTB 2,5/ 2 – 1803934
Cable housing, pitch: 0 mm, number of positions: 2, color: green
Coding element
Coding profile – CP-MSTB – 1734634
Coding profile, is inserted into the slot on the plug or inverted header, red insulating material
Labeled terminal marker
Marker card – SK 5,08/3,8:FORTL.ZAHLEN – 0804293
Marker card, Card, white, labeled, horizontal: consecutive numbers 1 … 10, 11 … 20, etc. up to 91 … (99)100, mounting type: adhesive, for terminal block width: 5.08 mm, lettering field size: 5.08 x 3.8 mm
Marker pen – B-STIFT – 1051993
Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm
Screwdriver tools
Screwdriver – SZS 0,6X3,5 – 1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip
Terminal marking
Marker card – SK U/2,8 WH:UNBEDRUCKT – 0803883
Marker card, Sheet, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, Office printing systems, mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 2.8 mm, Number of individual labels: 3600
Additional products
PCB header – MSTBW 2,5/ 2-G-5,08 – 1735882
PCB headers, nominal cross section: 2.5 mm², color: green, nominal current: 12
A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Male
connector, number of potentials: 2, Number of rows: 1, Number of positions per
row: 2, number of connections: 2, product range: MSTBW 2,5/..-G, pitch: 5.08
mm, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.5
mm, plug-in system: CLASSIC COMBICON, Pin connector pattern alignment:
Standard, Locking: without, mounting: without, type of packaging: packed in
cardboard
Printed-circuit board connector – MSTBVA 2,5/ 2-G-5,08 – 1755736
PCB headers, nominal cross section: 2.5 mm², color: green, nominal current: 12
A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Male
connector, number of potentials: 2, Number of rows: 1, Number of positions per
row: 2, number of connections: 2, product range: MSTBVA 2,5/..-G, pitch: 5.08
mm, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.9
mm, plug-in system: CLASSIC COMBICON, Pin connector pattern alignment:
Standard, Locking: without, mounting: without, type of packaging: packed in
cardboard
Printed-circuit board connector – MDSTBV 2,5/ 2-G-5,08 – 1763074 PCB headers,
nominal cross section: 2.5 mm², color: green, nominal current: 10 A, rated
voltage (III/2): 320 V, contact surface: Tin, type of contact: Male connector,
number of potentials: 4, Number of rows: 2, Number of positions per row: 2,
number of connections: 4, product range: MDSTBV 2,5/..-G, pitch: 5.08 mm,
mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.5 mm,
plug-in system: CLASSIC COMBICON, Pin connector pattern alignment: Standard,
Locking: without, mounting: without, type of packaging: packed in cardboard,
Can be aligned! Mounting flange: Item No. 1836477, 1836480. In combination
with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR
plug (or FKCVR) must be used. Combination with TMSTBP plug components is not
possible!
PCB header – SMSTBA 2,5/ 2-G-5,08 – 1767371
PCB headers, nominal cross section: 2.5 mm², color: green, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Male connector, number of potentials: 2, Number of rows: 1, Number of positions per row: 2, number of connections: 2, product range: SMSTBA 2,5/..-G, pitch: 5.08 mm, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.5 mm, plug-in system: CLASSIC COMBICON, Pin connector pattern alignment: Standard, Locking: without, mounting: without, type of packaging: packed in cardboard
Printed-circuit board connector – SMSTB 2,5/ 2-G-5,08 – 1769463
PCB headers, nominal cross section: 2.5 mm², color: green, nominal current: 12
A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Male
connector, number of potentials: 2, Number of rows: 1, Number of positions per
row: 2, number of connections: 2, product range: SMSTB 2,5/..-G, pitch: 5.08
mm, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.5
mm, plug-in system: CLASSIC COMBICON, Pin connector pattern alignment:
Standard, Locking: without, mounting: without, type of packaging: packed in
cardboard
PCB header – MDSTBW 2,5/ 2-G-5,08 – 1802430
PCB headers, nominal cross section: 2.5 mm², color: green, nominal current: 10 A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Male connector, number of potentials: 4, Number of rows: 2, Number of positions per row: 2, number of connections: 4, product range: MDSTBW 2,5/..-G, pitch: 5.08 mm, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.8 mm, plug-in system: CLASSIC COMBICON, Pin connector pattern alignment: Standard, Locking: without, mounting: without, type of packaging: packed in cardboard, The article can be aligned to create different nos. of positions! In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug components is not possible!
PCB header – MDSTBA 2,5/ 2-G-5,08 – 1842063
PCB headers, nominal cross section: 2.5 mm², color: green, nominal current: 10 A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Male connector, number of potentials: 4, Number of rows: 2, Number of positions per row: 2, number of connections: 4, product range: MDSTBA 2,5/..-G, pitch: 5.08 mm, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.2 mm, plug-in system: CLASSIC COMBICON, Pin connector pattern alignment: Standard, Locking: without, mounting: without, type of packaging: packed in cardboard, The article can be aligned to create different nos. of positions! In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug components is not possible!
PCB header – MDSTBVA 2,5/ 2-G-5,08 – 1845332 PCB headers, nominal cross section: 2.5 mm², color: green, nominal current: 10 A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Male connector, number of potentials: 4, Number of rows: 2, Number of positions per row: 2, number of connections: 4, product range: MDSTBVA 2,5/..-G, pitch: 5.08 mm, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.9 mm, plug-in system: CLASSIC COMBICON, Pin connector pattern alignment: Standard, Locking: without, mounting: without, type of packaging: packed in cardboard, The article can be aligned to create different nos. of positions! In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug components is not possible!
PCB header – MDSTBA 2,5/ 2-GL-5,08 – 1877601 PCB headers, nominal cross section: 2.5 mm², color: green, nominal current: 10 A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Male connector, number of potentials: 4, Number of rows: 2, Number of positions per row: 2, number of connections: 4, product range: MDSTBA 2,5/..-G, pitch: 5.08 mm, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.2 mm, plug-in system: CLASSIC COMBICON, Pin connector pattern alignment: Standard, Locking: without, mounting: without, type of packaging: packed in cardboard, The article can be aligned to create different nos. of positions! In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug components is not possible!
PCB header – MDSTBA 2,5/ 2-GR-5,08 – 1877614
PCB headers, nominal cross section: 2.5 mm², color: green, nominal current: 10
A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Male
connector, number of potentials: 4, Number of rows: 2, Number of positions per
row: 2, number of connections: 4, product range: MDSTBA 2,5/..-G, pitch: 5.08
mm, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.2
mm, plug-in system: CLASSIC COMBICON, Pin connector pattern alignment:
Standard, Locking: without, mounting: without, type of packaging: packed in
cardboard, The article can be aligned to create different nos. of positions!
In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW)
and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug
components is not possible!
PCB header – MDSTBVA 2,5/ 2-GL-5,08 – 1877627
PCB headers, nominal cross section: 2.5 mm², color: green, nominal current: 10
A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Male
connector, number of potentials: 4, Number of rows: 2, Number of positions per
row: 2, number of connections: 4, product range: MDSTBVA 2,5/..-G, pitch: 5.08
mm, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.9
mm, plug-in system: CLASSIC COMBICON, Pin connector pattern alignment:
Standard, Locking: without, mounting: without, type of packaging: packed in
cardboard, The article can be aligned to create different nos. of positions!
In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW)
and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug
components is not possible!
PCB header – MDSTBVA 2,5/ 2-GR-5,08 – 1877630
PCB headers, nominal cross section: 2.5 mm², color: green, nominal current: 10
A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Male
connector, number of potentials: 4, Number of rows: 2, Number of positions per
row: 2, number of connections: 4, product range: MDSTBVA 2,5/..-G, pitch: 5.08
mm, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.9
mm, plug-in system: CLASSIC COMBICON, Pin connector pattern alignment:
Standard, Locking: without, mounting: without, type of packaging: packed in
cardboard, The article can be aligned to create different nos. of positions!
In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW)
and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug
components is not possible!
Printed-circuit board connector – DFK-MSTBA 2,5/ 2-G-5,08 – 1898839
Feed-through header, nominal cross section: 2.5 mm², color: green, nominal
current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, type of
contact: Male connector, number of potentials: 2, Number of rows: 1, Number of
positions per row: 2, number of connections: 2, product range: DFK-MSTBA
2,5/..-G, pitch: 5.08 mm, mounting: Wave soldering, pin layout: Linear
pinning, solder pin [P]: 3.2 mm, plug-in system: CLASSIC COMBICON, Pin
connector pattern alignment: Standard, Locking: without, mounting: without,
type of packaging: packed in cardboard
Printed-circuit board connector – DFK-MSTBVA 2,5/ 2-G-5,08 – 1899139
Feed-through header, nominal cross section: 2.5 mm², color: green, nominal
current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, type of
contact: Male connector, number of potentials: 2, Number of rows: 1, Number of
positions per row: 2, number of connections: 2, product range: DFK-MSTBVA
2,5/..-G, pitch: 5.08 mm, mounting: Wave soldering, pin layout: Linear
pinning, plug-in system: CLASSIC COMBICON, Pin connector pattern alignment:
Standard, Locking: without, mounting: without, type of packaging: packed in
cardboard
Printed-circuit board connector – CC 2,5/ 2-G-5,08 P26THR – 1954388
PCB headers, nominal cross
section: 2.5 mm², color: black, nominal current: 12 A, rated voltage (III/2):
320 V, contact surface: Tin, type of contact: Male connector, number of
potentials: 2, Number of rows: 1, Number of positions per row: 2, number of
connections: 2, product range: CC 2,5/..-G, pitch: 5.08 mm, mounting: THR
soldering, pin layout: Linear pinning, solder pin [P]: 2.6 mm, plug-in system:
CLASSIC COMBICON, Pin connector pattern alignment: Standard, Locking: without,
mounting: without, type of packaging: packed in cardboard, User information
and design recommendations for through hole reflow technology can be found
under: Downloads
Printed-circuit board connector – CC 2,5/ 2-G-5,08 P26THRR32 – 1954582
Printed-circuit board connector – CCA 2,5/ 2-G-5,08 P26THR – 1954919
PCB headers, nominal cross section: 2.5 mm², color: black, nominal current: 12
A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Male
connector, number of potentials: 2, Number of rows: 1, Number of positions per
row: 2, number of connections: 2, product range: CCA 2,5/..-G, pitch: 5.08 mm,
mounting: THR soldering, pin layout: Linear pinning, solder pin [P]: 2.6 mm,
plug-in system: CLASSIC COMBICON, Pin connector pattern alignment: Standard,
Locking: without, mounting: without, type of packaging: packed in cardboard,
User information and design recommendations for through hole reflow technology
can be found under: Downloads
Printed-circuit board connector – CCA 2,5/ 2-G-5,08 P26THRR32 – 1955031
PCB headers, nominal cross section: 2.5 mm², color: black, nominal current: 12
A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Male
connector, number of potentials: 2, Number of rows: 1, Number of positions per
row: 2, number of connections: 2, product range: CCA 2,5/..-G, pitch: 5.08 mm,
mounting: THR soldering, pin layout: Linear pinning, solder pin [P]: 2.6 mm,
plug-in system: CLASSIC COMBICON, Pin connector pattern alignment: Standard,
Locking: without, mounting: without, type of packaging: 32 mm wide tape, User
information and design recommendations for through hole reflow technology can
be found under: Downloads
Printed-circuit board connector – CCV 2,5/ 2-G-5,08 P26THR – 1955387
PCB headers, nominal cross
section: 2.5 mm², color: black, nominal current: 12 A, rated voltage (III/2):
320 V, contact surface: Tin, type of contact: Male connector, number of
potentials: 2, Number of rows: 1, Number of positions per row: 2, number of
connections: 2, product range: CCV 2,5/..-G, pitch: 5.08 mm, mounting: THR
soldering, pin layout: Linear pinning, solder pin [P]: 2.6 mm, plug-in system:
CLASSIC COMBICON, Pin connector pattern alignment: Standard, Locking: without,
mounting: without, type of packaging: packed in cardboard, User information
and design recommendations for through hole reflow technology can be found
under: Downloads
Printed-circuit board connector – CCV 2,5/ 2-G-5,08 P26THRR32 – 1955523
PCB headers, nominal cross section: 2.5 mm², color: black, nominal current: 12
A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Male
connector, number of potentials: 2, Number of rows: 1, Number of positions per
row: 2, number of connections: 2, product range: CCV 2,5/..-G, pitch: 5.08 mm,
mounting: THR soldering, pin layout: Linear pinning, solder pin [P]: 2.6 mm,
plug-in system: CLASSIC COMBICON, Pin connector pattern alignment: Standard,
Locking: without, mounting: without, type of packaging: 32 mm wide tape, User
information and design recommendations for through hole reflow technology can
be found under: Downloads
Printed-circuit board connector – CCVA 2,5/ 2-G-5,08 P26THR – 1955853
PCB headers, nominal cross section: 2.5 mm², color: black, nominal current: 12
A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Male
connector, number of potentials: 2, Number of rows: 1, Number of positions per
row: 2, number of connections: 2, product range: CCVA 2,5/..-G, pitch: 5.08
mm, mounting: THR soldering, pin layout: Linear pinning, solder pin [P]: 2.6
mm, plug-in system: CLASSIC COMBICON, Pin connector pattern alignment:
Standard, Locking: without, mounting: without, type of packaging: packed in
cardboard, User information and design recommendations for through hole reflow
technology can be found under: Downloads
Printed-circuit board connector – CCVA 2,5/ 2-G-5,08 P26THRR32 – 1955963
PCB headers, nominal cross section: 2.5 mm², color: black, nominal current: 12
A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Male
connector, number of potentials: 2, Number of rows: 1, Number of positions per
row: 2, number of connections: 2, product range: CCVA 2,5/..-G, pitch: 5.08
mm, mounting: THR soldering, pin layout: Linear pinning, solder pin [P]: 2.6
mm, plug-in system: CLASSIC COMBICON, Pin connector pattern alignment:
Standard, Locking: without, mounting: without, type of packaging: 32 mm wide
tape, User information and design recommendations for through hole reflow
technology can be found under: Downloads
Phoenix Contact 2021 © – all rights reserved
http://www.phoenixcontact.com
References
- Login
- Download portal | PHOENIX CONTACT
- Home | IECEE
- Phoenix Contact USA
- Online Service
- MSTB 2,5/ 2-ST-5,08 - PCB connector - 1757019 | Phoenix Contact