FACE MI 63316 Walrus Audio Canvas Stereo User Manual
- June 3, 2024
- FACE MI
Table of Contents
MI 63316 Walrus Audio Canvas Stereo
User Manual
63316 Walrus Audio Canvas Stereo
WALRUS AUDIO CANVAS STEREO (Line Isolator & D.I.)
- Item: 63316
- EAN: 810424034228
- Packaging dimensions: 14.6 x 10.7 x 6.4 cm
- Weight: 0.44 kg
- Pictures | https://faceeu.sharepoint.com/Gedeelde documenten/Forms/AllItems.aspx?id=%2FGedeelde documenten%2FMarketing Resources%2FInternal MI%2FSupplier Content%2FWalrus Audio%2FConfidential%2FCanvas Line Isolator %26 Dual Line Isolator%2FCanvas Stereo%2FDocuments %28descriptions%2C translations%2C manual%2C%2E%2E%2E%29&p=true&ga=1| Manual
Need to know for Retailers
- Canvas is Walrus Audio’s first line of DI Boxes: Mono & Stereo version available
- Convert your unbalanced signal into a balanced signal for interfacing properly with e.g. your recording interface or FOH mixer
- Select between DI or LI (line isolator) mode
- DI Mode = for high impedane sources such as E-Guitars or Basses
- LI Mode = for low impedance line level sources such as Amp-sims (e.g. ACS1) or Keyboards
- Fully passive no power required
- Stompbox format for super easy integration on pedalboard
- Coolest looking DI Box on the market Full Feature List
- Passive Line Isolator and Direct Injection device
- Converts ¼” unbalanced input to XLR balanced output
- For interfacing with your recording interface or FOH mixer
- Works perfectly with amp-in-a-box devices e.g. Walrus Audio ACS1
- Stompbox format for easy integration on pedalboards
- Choose between DI- or Line-Isolator-Mod
- Flat frequency response from 20Hz-20kHz
- Custom wound transformers for low THD and full frequency response
- Transformer isolated output · Sum switch
- When disengaged (out), the left input connects to the left thru. The right input connects to the right thru allowing the use of stereo amplifiers
- When engaged (in), Sum connects the left and right thru jacks together to combine the signals for running into a single amplifier (use either thru jack)
- Pad: Enabled a -15dB input pad (only in D.I. mode) to minimize distortion
- GND Lift: Isolates GND pin on XLR to reduce hum
- Passive design no power required
- Made in the USA
Description
Consider this your clean slate. The Canvas Stereo is a Direct Box/LIne
Isolator designed to remove any resistance between you and your audience by
giving a pristine, sonic foundation to build your stereo masterpiece upon.
From houses of worship to the dive bar downtown, Canvas Stereo is built to be
the performance tool that goes wherever you are making your music.
Canvas Stereo is a Passive Line Isolator (LI) and Direct Injection (DI) device
that converts your unbalanced signals into balanced signals for interfacing
properly with your recording interface or mixer at front-ofhouse. If you’re
using an amp-in-a-box (DSP Guitar Rig), like our ACS1, keyboards, or any other
instrument utilizing both left and right outputs, then the Canvas Stereo is
your new bridge to the front-of-house. The Canvas Series DIs pack everything
you need from a DI/LI into a standard pedal-sized enclosure designed to look
great right on top of your board.
Direct Injection
Use DI mode when connecting an unbalanced, high impedance source (Electric
Guitar, Bass Guitar, etc). The signal will be reduced by -20dB (-35dB with pad
engaged) and converted to a balanced signal via the transformer connected to
the XLR output. Use the gain on your mixer or preamp to bring the signal up to
line level.
Line Isolator
Use LI mode when connecting your unbalanced, low impedance source (Amp + Cab
Sim like the ACS1, keys, etc.). The signal will remain full volume and be
converted to a balanced signal via the transformer connected to the XLR
output. Less preamp gain will be required in LI mode.
DI or LI?
When deciding between DI or LI, check with the manufacturer of your gear to
find the output impedance of the device you are wanting to interface with.
For a general guide:
- High Impedance = anything above 1k = Use DI
- Low Impedance = less than 1k = Use LI
Troubleshooting
This is a passive device, so you will not damage anything if connected
improperly, but it could affect the signal level and frequency response if not
connected properly. This is an easy thing to test since the LI/DI switch is
built into Canvas. If you lose high-frequency information when using LI mode,
then you should probably be in DI mode.
Pictures Canvas Stereo B2B Resources Download
Link
FACE BVBA
HOEK 76 – UNIT 301 – 2850 BOOM
+32 3 844 67 97
H.R. ANTWERPEN 291868
VAT/TVA/BTW 0448 180 481
INFO@FACE-BE.EU
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>