Gold Century GC-1001 Handheld Metal Detector User Manual

June 3, 2024
Gold Century

Gold Century GC-1001 Handheld Metal Detector

General

Your GC-1001 is a portable handheld metal detector. It’s a special tool for security inspection. The main features include LED & audio alarms, and auto- scanning. quick response to small objects, and 3·.5mm headphone jack,lt’s mainly used for security inspection in airports. court, stadium, prison, and other entertainment places. It can find concealed weapons, knives and other metal objects In baggage and post parcels.

Operation

  1. Open the battery cover with a screwdriver and remove it backward. Install one 9v
  2. alkaline battery (6F22.S006P) correctly, paying attention to the anode and the cathode of the battery. Recover the battery cover and tighten the screw. Hold the handle of your GC-1001 metal detector, power on by pressing the switch up to the ON position, after the unit auto-scan for, 1-2 seconds, the green Ready lights on the front and back panel .if your metal detector blink and the red Alert lights.
  3. extinguish which indicates your metal detector is in normal operation. Press and hold the switch down to power on, the unit will be in momentary and low-sensitivity operation. The switch will return to OFF position automatically by releasing it.
  4. When the detection area sweeps through a known object (such as a coin ) speaker gives off audio alers and red Alert lights on the front and back face of your metal detector illuminate as an alert. For large metal objects ( such as a steel ruler). the audio tone will be higher than it for small objects.

Front Panel

Gold-Century-GC-1001-HandheldMetal-Detector-2

  1. Power Switch
    The power switch is a rocker and lever handle switch, which has two main functions and three positions. Power: ON-OFF (ON), Sensitivity: Normal OFF-(Low).

  2. Audio Alert
    When the detection area sweeps through a metal object, the speaker gives off audio alerts. When a ¢3. 5mm earphone is connected through the earphone jack, the earphone will give off audio alerts instead of a speaker.

  3. Light Alert
    When your metal detector finds a metal object, the red Alert lights on the front and back faces of your metal detector illuminate. The function is also available when an earphone is in use.

  4. Audio Tone Discrimination
    Taking advantage of the feature of ATD, there is only change of audio volume when detecting a small metal object. while there are changes of both audio volume and pitch of the audio toue when a large metal object is detected.

  5. Reset
    Reset is a light-press button, press it lightly to recover to normal operation, especially for the existence of illusive alerts and when the temperature of the detection environment changes rapidly.

  6. Earphone
    When you detect in an extremely noisy environment or for an individual with special need, you can connect an earphone for silent operation.

  7. Low Battery Indication
    After powering on your GC-1001(without detecting any metal object), it keeps on giving off audio alerts, the green Ready lights aren’t blinking any more and the red Alert lights are on, which indicate the voltage of the battery is “low and there is need to replace it with a fresh battery. In low battery conditions,yourGC-1001 is also able to detect metal. but you can only distinguish different audio tones from sustaining audio alerts. To ensure the reliability of the detection result, you’d better replace it with the fresh alkaline battery

Body Scanning Procedure

Gold-Century-GC-1001-HandheldMetal-Detector-3

First, to scan the front of the body, pass the detector from the right shoulder down to the ankles and then up to the left shoulder as shown in Figure 3.

  1. Second,to scan the back of the body, start behind the head, follow the outline of the body and pass down the line of the spine as shown in Figure 4.
  2. At last,to search feet and ankles, keep the detector vertical, approximately 1-2 inches above the floor.It may be necessary to use the Low button while searching near floors.

Maintenance

Power off your GC-1001 if the metal detector is not in use. Keep your metal detector clean and dry. Clean your detector with a damp cloth to maintain its appearance. Do not use chemical cleaners. Remove the battery from the battery compartment if you don’t want to use it for a long time.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals