RAVEN P515 ISO System Software Update User Guide

RAVEN P515 ISO System Software Update

Specifications

• Product Name: ISO System Software Update
• Version : 2024.01.24
• Release Date: January 24, 2024
• Compatibility : Requires Raven Viper 4 display running version 2.7 software or greater

Product Usage Instructions

Downloading and Installing Firmware Updates
Follow these steps to download and install firmware updates for ISO nodes:

1. Download the update file to your computer.
2. Extract the saved file to the root directory of a USB drive.
3. Double-click on the self-extracting application in the USB drive’s root directory.
4. Select the root directory of the USB drive as the extraction location.

Node Recovery Mode
If you encounter any issues during the update process, refer to the user manual for node recovery instructions.

Updating ISO Nodes with CRX Field Computer
To update ISO nodes using a CRX field computer:

1. Ensure CRX software version 2.0 or higher is installed on the CR7 field computer.
2. Use the Raven Service Tool for updating CAN Nodes.
3. Follow the instructions provided in the update package for installation.

Importing Node Updates
To import node updates, follow the steps outlined in the installation instructions within the update package.

Updating Node Firmware
Execute the firmware update process as described in the user manual to ensure all nodes are updated successfully.

Instructions

• Version: 2024.01.24
• Release Date: January 24, 2024

This is a new ISO update package that provides procedures to update firmware for certain ISO nodes via the Raven Viper 4 display (if running version 2.7 software or greater) or the Raven Service Tool if running a Universal Terminal other than the Viper 4. CRX software version 2.0 or higher is required for updating ISO nodes using this process on the CR7 field computer. All CAN Nodes will require a Raven Service Tool.

Contents

• Download and Installation Instructions
• Release Notes
• Installing CANBUS or ISOBUS Firmware Updates via Viper 4 Node Recovery Mode
• Important CAN Node Updates
  • How to Update ISO Nodes with the CRX Field Computer
  • Importing Node Updates Updating Node Firmware

Download and Installation Instructions

Please refer to the installation instructions included in the zip file for update and installation instructions.

ISO Node download instructions for Self-Extracting Application when the file has been zipped:

1. Download (Save As) file to a location on your computer
2. Unzip/Extract Saved File to the Root Directory of USB
3. Using Mouse, left click twice on Self Extracting Application on Root Directory of USB
4. Select Root Directory of USB as location to Extract

Release Notes
Full release notes for each product update are included in the package.

Changes from ISOUpload_2023.12.22.zip to ISOUpload_2024.01.24.zip:

1. Updated 35_04758 (P515) from 23.3.0.10 to 23.4.0.18
2. Updated 92040093 (P609) from 22.2.0.5 to 23.4.0.3
3. Updated 92165057 (P437) from 23.3.1.10 to 23.4.1.36
4. Updated CNHiRateControlModule (P591) from 22.3.3.4 to 23.4.1.1
5. Updated CNHRavenExpansionModule (P571) from 23.2.0.2 to 23.4.0.1
6. Updated AGCOAutoBoomXRT (P517) from 23.2.2.1 to 23.2.4.8
7. Updated 92165108 (P514) from 23.3.0.11 to 23.4.0.18
8. Updated SC1_Standard_v24_1_0_255 (P449) from 23.3.1.2 to 24.1.0.255
9. Updated UnverferthGrainCartModule (P538) from 23.2.0.4 to 24.1.0.4
10. Updated MDU (P502) from 23.3.0.9 to 24.1.0.1
11. Updated HDU (P521) from 23.3.0.9 to 24.1.0.1
12. Updated Hawkeye2NCV2 (P570) from 23.3.0.2 to 23.4.0.1

Installing CANBUS or ISOBUS Firmware Updates via Viper 4

NOTE : The node firmware can be transferred from the USB flash drive onto the ROS device before the firmware updates can be applied to nodes connected to the system using the System Manager utility. Refer to Import CAN Node Updates section for assistance copying CAN Node Update files.

To apply a firmware update to a CANbus system component:

1. Insert the USB flash drive with the firmware update files into the ROS device.
   NOTE : Review the CANbus Firmware Download Example section for more information on the folder structure required for performing the update.

2. Use the USB Manager utility within the File Manager to import the CAN node updates. Refer to Chapter 7, File Manager, for additional assistance using the USB Manager.

3. Touch the Administrator or User Panel along the top of the Main Panel display to expand the panel.

4. Select the System Manager utility and touch the Hardware Update tab.

5. In the upper portion of the Hardware Update tab, select a specific node to be updated.
   NOTE : Note the program number (PGM #) for the node selected. In case of problems with the node update, this number will be required to select the appropriate program number for recovering the node. Refer to the Node Recovery Mode section or contact a local Raven dealer for additional assistance.

6. Select the appropriate update from the Versions Available list for the selected node.

7. Touch the apply update button to update the firmware on the selected node. The ROS device will install the selected firmware update. Repeat the process to update any other nodes as necessary or required.

NOTE : If a problem is encountered during the firmware update process, refer to the Raven CANbus Installation Manual for information on troubleshooting the node and use the recovery mode to attempt to restore the CANbus node. Refer to the Node Recovery Mode section for additional information on using the recovery mode with a Raven CANbus system.

Node Recovery Mode

NOTE : The node program number is required to properly recover the node. If the program number is unknown, contact a local Raven dealer or the Raven Technical Support Center for additional assistance with appropriate program numbers for recovering a CANbus node.

To attempt to recover a CANbus node on which a failed update has occurred:

1. Insert the USB flash drive with the firmware update files in the required folder into the ROS device. NOTE: Review the CANbus Firmware Download Example section for more information on the folder structure required for performing the update.

2. Use the USB Manager utility within the File Manager to import the CAN node updates. Refer to Chapter 7, File Manager, for additional assistance using the USB Manager.

3. Touch the Administrator or User Panel along the top of the Main Panel display to expand the panel.

4. Select the system manager utility and touch the hardware update tab.

5. Disconnect the rectangular connectors on the node for approximately five seconds to cycle power to the node. Ensure any status LEDs are off or stop flashing before reconnecting the node.

6. On the ROS device, touch the versions field and use the scrolling list to select the appropriate node program to reset the node. The node program and version numbers will be displayed in the following format:
   Program Number → P144V111 ← Version Number

7. Touch the Apply Update button to attempt to recover the node. If the node recovery fails, or for additional support, contact a local Raven dealer.

Important CAN Node Updates

NOTE : Review the Installing CANbus or ISOBUS Firmware Updates section for additional information on downloading and applying updates to Raven CANbus hardware.
Any node firmware updates copied or moved to the ROS device will be saved on the device until deleted using the file maintenance feature. Refer to the Delete Files section for assistance with deleting node update files from the ROS device.

To import CAN/ISO node firmware updates from a USB flash drive:

1. Insert a USB flash drive used with the ROS device and containing the CAN node updates.

2. Press the Administrator or User Panel along the top of the Main Panel display to expand the panel.

3. Select the File Manager utility and touch the USB Manager tab.

4. Touch the USB drop down and select the connected USB flash drive from which to import files.

5. Touch the File Type drop down and select the “Node Update” option.

6. Touch the Next button on the USB manager tab. The USB flash drive and folder structure will display.

7. Use the displayed browser to locate and select the “canupload” or “ISOUpload” folder downloaded from the Raven website. Node update files currently stored on the USB flash drive will be displayed in the lower portion of the USB manager tab.
   Example: “USB Drive Name” > can upload (or ISOUpload) NOTE : Review the Installing CANbus or ISOBUS Firmware Updates section for additional information on downloading and applying updates to Raven CANbus hardware.

8. Press Select All at the top of the file list to import all node updates from the USB flash drive. Node updates may be removed or deleted after the CANbus hardware update process has been completed. Alternatively, touch the box displayed to the left of the node update file name to import only a specific node update if the file name is known.

9. With at least one CAN node update file selected, select one of the following import actions:

10. Copy – create a duplicate of the selected information on the ROS device.

11. Move – import the selected information on the ROS device and remove the information from the USB flash drive. The Import Files Prompt will display

12. Verify the list of files to be imported is correct. If the list requires further configuration, touch the Cancel button to return to the USB Manager tab.

13. Touch the Import button to begin the file transfer process.

How to Update ISO Nodes with the CRX Field Computer

NOTE : 2.0 or higher CRX software is required for updating ISO nodes using this process. All CAN nodes will require a Raven Service tool.
The download will be a compressed file, which will need to be extracted to the root directory of your USB drive. The HEX files should be on the root directory of the USB. (Do not need ISOUpload folder to import node updates).

Importing Node Updates

1. From the Settings page, go to the File Manager tab
2. Choose your USB drive
3. Select CAN Node Firmware as your file type
4. Select the node update you want to import
5. Select the “copy files” button at the bottom of the screen

Updating Node Firmware

1. From the Settings page, go to the “Software Update” tab
2. Once in “Software Update”, go to the Hardware tab on the left side of the screen
3. Select the hardware you want to update
4.  After highlighting, “Versions Available” will show up at the bottom of the screen
5. Choose the version you wish to update to
6. Press “Start Update” to begin the update process

Helping farmers serve the world. ravenind.com

FAQ

Q: Can I update ISO nodes using a different display other than Raven Viper 4?
A: Yes, you can use the Raven Service Tool with a Universal Terminal other than Viper 4 for updating ISO nodes.

Q: What software versions are required for updating CAN Nodes?
A: CAN Nodes require CRX software version 2.0 or higher for updates on the CR7 field computer.

Q: How can I recover a node if the update process fails?
A: Refer to the user manual for instructions on node recovery mode in case of a failed update process.

References

• Knowledge base - How to Update Nodes with the Raven Service Tool

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>