imperii RR FIERRO SmartBand Pool Instruction Manual
- June 7, 2024
- imperii electronics
Table of Contents
imperii RR FIERRO SmartBand Pool Instruction Manual
Download Application
Before connecting, make sure the wristband is on and the Bluetooth on your
Smartphone is turned on.
The name of the application is “UETON”. Look for “UETON” in the App Store or on Google Play, or scan the lower QR code;
Android
iOS
How to wear the bracelet
The best position to wear the bracelet is above the styloid of the ulna. Please make sure the sensor is close to the skin and prevents it from moving.
TURN ON, TURN OFF
Touch the screen for more than three seconds, the bracelet will light up with
a vibration and the screen will light up.
When the bracelet is on, touch the screen for more than three seconds to
switch to the off mode. Selecting “OFF” by holding it down will stop the
bracelet. Selecting and holding “ON” will return you to the main screen.
Using the device
IMPORTANT: The first time you connect to a device, please make sure that
connects to the App, and the date and time are automatically updated.
Open App- > Device-> slide-> Binding
When the bracelet and phone are connected properly, will begin immediately
recording and analyzing data of exercise and sleep, showing that data in the
app. When disconnected, the device can display time and sports data on the
screen automatically, Keeping that data for up to 7 days.
Once the device is connected to your mobile phone, the BT icon will appear
on the screen.
Heart Rate Test
When you move to the heart rate interface, press and hold the screen as shown.
Heart rate icon will flash, and the LED will light heart, indicating that it
has begun test heart rate, you need about 30 seconds to get results. You can
also connect to the App and give “Start” to start the test.
Heart rate display (Test Results)
Tips: When performing the test, please make sure that the sensor is close to the skin and that the outside light does not interfere with the accuracy of the test. The skin area where the sensor goes must be clean, sweat and dirt can affect the test results.
Main Functions
Standard Sports Function (steps, distance, calories)
|
Shake to take pictures
---|---
Antl-lost alarm (alert when the phone goes out of range)
|
Message Notification (you can add more)
Sleep monitor (duration and quality of sleep)
|
Configuring sport goals, disseminating sports information
Sedentary alarm (in iOS default in 1 hour)
|
Restart factory settings
Call notification
|
Firmware update
When the phone receives incoming calls or messages, the device vibrates
Tips for Android users:
- Open the smart unlock function: it automatically locks the screen when the phone is away from the bracelet, and unlocks it when it is close, although this function is only supported by some Smartphone models.
- When using the anti-lost function you will need to accept the request that appears in the app of your mobile.
- When using message notification, you must allow the app to work in the background.
- We suggest that the app be added to the trusted list or applications in the configuration of your phone.
Charging
Please connect the device with the charging cable as shown in figure 1 , the charging part must fit into its holes as shown in figure 2 , and the USB output to the corresponding port.
FIGURE 1
FIGURE 2
Tips
- Please do not bring your device to showering or swimming.
- Data only for reference, the device cannot replace a medical device.
- Please perform the tests at a normal temperature.
- Connect the device to synchronize the data.
- Please charge the device with its original charger.
- Do not expose the device to excessive humidity or extreme cold or heat.
- If the device does not work, please clean the phone memory or exit the App and re-enter.
- The pedometer will start working the first time you manually connect the APP with the device, you will not need to activate it later.
- The device will vibrate when connected to the charger with a current greater than 2V; if it is less than 2V the bracelet will not send any alerts when connecting to the charger.
- When the device is charging the touch screen will auto-calibrate itself and will fail moderately. After 10 seconds it will return to normal operation.
Package contents
- Smart bracelet
- Charger
- Manual
Basic parameters
| Display: OLED | Battery Type: Lithium Polymer |
|---|---|
| Lithium Polymer: 15 days | Synchronization Method: Bluetooth 4.0 |
| Operating temperature: – 20oC to 50oC |
System Requirements
Android: Smartphone that supports Bluetooth 4.0 and with system Android
4.3 or higher and Wechat 6.0 or higher.
iOS: All iPads and iPhones with iOS 8.0 or higher, Wechat 6.0 or higher.
Technical Service:
Visit: http://www.imperiielectronics.com/contactus
imperii RR FIERRO SmartBand Pool Instruction Manual – Download
[optimized]
imperii RR FIERRO SmartBand Pool Instruction Manual –
Download
imperii RR FIERRO SmartBand Pool Instruction Manual – OCR
PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>