Accurist 70001 Origin 41mm Quartz Watch Instructions

**Accurist 70001 Origin 41mm Quartz Watch Instructions

**

Service and Repairs

Your Accurist watch is guaranteed against defects in materials and workmanship for a period of 2 years from the date of purchase. You can register online to extend your guarantee for an additional 3 years, to a total of 5 years. During this period, we will exchange or repair, at our discretion, any defective components free of charge.

IMPORTANT – Not covered by Guarantee:

1. Batteries, straps, and bracelets.
2. Damage caused by accident, misuse, or lack of care.
3. Water penetrations except in watches marked as WaterResistant.

SERVICING AND REPAIRS UNDER GUARANTEE
Please post your watch, together with the Retailer’s Sales Receipt or proof of purchase, and a brief note to explain the nature of the fault, by Registered Post or Recorded Delivery to the address shown. Do not send the presentation box as this will NOT be returned.

SERVICING AND REPAIRS OUTSIDE OF GUARANTEE
Available at a reasonable charge after an estimate has been sent by T.P. (UK) Ltd. Send your watch to us by Registered Post or Recorded Delivery to the address shown.

IMPORTANT NOTE
It is important to identify your watch correctly. If, after reading this Instruction Guide, you have any further questions regarding the use, operation, or adjustment of your watch, please call us during office hours on 0116 288 2500

T.P. (UK) Ltd, Alexander House, Chartwell Drive, Wigston, Leicester LE18 2EZ, United Kingdom.

OPERATING AND ADJUSTING YOUR WATCH
Your quartz analogue watch is powered by a battery which was inserted at the time of manufacture and will require periodic replacement. New batteries can be supplied and fitted by your nearest Accurist stockist.

Quartz analogue watches do NOT require winding.
The crown is used for hand/function setting only. When in use, ensure that the crown is pushed fully in. Failure to do so can result in excessive battery drain or damage to the hand setting mechanism.

Your watch strap/bracelet features a quick-release mechanism. Please see the video on our website for further instructions related to this.

Instructions

WATER RESISTANCE
RESISTANT TO 100 METRES (WR 100M / 330FT / 10ATM). Case only, excludes straps and bracelets. Can be used while bathing, swimming, poolside diving, and snorkelling. NOT to be used while high-board diving or scuba diving.
IMPORTANT – Buttons must not be operated while in contact with water. Do NOT pull open the crown while in contact with water

TIME SETTING – WATCHES WITH NO DATE

• Pull the crown out to position 2.
• Advance hands to the correct time by turning the crown.
• Return the crown to position 1.

TIME SETTING – CHRONOGRAPH AND DATE WATCHES

NOTE – If your watch features a chronograph, this must be stopped before setting the time.

• Pull the crown out to position 3.
• Advance hands to the correct time by turning the crown.
• Return the crown to position 1.

DATE SETTING

• Pull the crown out to position 2.
• Turn the crown clockwise to set the correct date.
• Return the crown to position 1.

NOTE: Do not set the date between 9:00pm – 1:00am as the date change cycle is in progress.

CHRONOGRAPH FUNCTION

USING THE CHRONOGRAPH FUNCTION
The chronograph can measure time up to a maximum of 30 minutes. It will stop automatically after running continuously for 30 minutes.

• Press A to start the chronograph.
• Press A again to stop the timing.
• Press B to reset the chronograph.

SPLIT TIME MEASUREMENT

• Press A to start the timing.
• Press B to split the timing.
• Press B to release the timing as many times as required.
• Press A to stop the chronograph timing.
• Press B to reset the chronograph.

RESETTING THE CHRONOGRAPH FUNCTION
If the chronograph hands do not return to the 0 position, follow the below instructions to reset the chronograph:

• Pull the crown out to position 2.
• Press the A button to set the chronograph second hand forward.
• Press the B button to set the chronograph second hand backward.
• The chronograph minute hand is synchronised with the chronograph second hand.
• Once both hands are returned to the 0 position, reset the time, and return the crown to position 1.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>