ASUS Pen 2.0 Active Stylus SA203H User Guide
- June 3, 2024
- Asus
Table of Contents
ASUS Pen 2.0 Active Stylus SA203H
Package contents
- ASUS Pen x 1 (Model Name: SA203H)
- Pen tip x 4 (2H x 1, H x 1, HB x 1, B x 1)
- USB Type-C® charging cable x 1
- Quick Start Guide x 1
LED indicator lights
Color/Bluetooth Status
- Blinking Blue Pairing
- Solid White Paired
Color/Battery Status
- Solid White Fully charged
- Solid Orange Charging
- Blinking Red Battery power lower than 35%
Replacing the pen tip of your ASUS Pen
Hardware Interface
- Eraser button
- USB Type-C® port
- Replaceable pen tip
- Right click button
- LED indicator
- Bluetooth button
Getting started
Charging your ASUS Pen
- Gently pull the USB Type-C® port cover to reveal the port.
- Align and place the bundled USB Type-C® charging cable onto the USB Type-C® port.
- Connect the USB charging cable to a power source to start charging.
NOTE: To activate your ASUS Pen, ensure to charge your ASUS Pen before using it for the first time.
Pairing your ASUS Pen with the Bluetooth device
- Ensure the other device is Bluetooth enabled.
- Press and hold the Bluetooth button on your ASUS Pen until the LED indicator starts blinking blue light.
- On the other device, select “ASUS Pen” from the Bluetooth device list to start pairing.
- The LED indicator will turn white once the pairing process is complete.
Notices
Simplified EU Declaration of Conformity
ASUSTeK Computer Inc. hereby declares that this device is in compliance with
the essential requirements and other relevant provisions of Directive
2014/53/EU. Full text of EU declaration of conformity available at
https://www.asus.com/support/.
CE RED RF Output table (Directive 2014/53/EU)
Function | Frequency | E-Field strength (at 10 m) |
---|---|---|
Active stylus | 18-210 KHz | -11.73 dBuA/m |
Simplified UKCA Declaration of Conformity
ASUSTek Computer Inc. hereby declares that this device is in compliance with
the essential requirements and other relevant provisions of The Radio
Equipment Regulations 2017 (S.I. 2017/1206). Full text of UKCA declaration of
conformity is available at https://www.asus.com/support/.
UKCA RF Output table (The Radio Equipment Regulations 2017)
Function | Frequency | E-Field strength (at 10 m) |
---|---|---|
Active stylus | 18-210 KHz | -11.73 dBuA/m |
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
EQUIPMENT AUTHORIZATION REQUIREMENT.
Devices operating below 490 kHz in which all emissions are at least 40 dB
below the limits in §15.209 shall be verified pursuant to the procedures in
Subpart J of part 2 of this chapter prior to marketing. This device complies
with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
Important Notice
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Radiation Exposure Statement:
The product complies with the FCC portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in
this manual. Further RF exposure reduction can be achieved if the product can
be kept as far as possible from the user body or set the device to lower
output power if such a function is available.
Radiation Exposure Statement:
The product complies with the Canada portable RF exposure limit set forth for
an uncontrolled environment and are safe for intended operation as described
in this manual. Further RF exposure reduction can be achieved if the product
can be kept as far as possible from the user body or set the device to lower
output power if such a function is available.
Caution:
Any changes or modifications not expressly approved by the grantee of this
device could void the user’s authority to operate the equipment.
Service and Support
Visit our multi-language website at https://www.asus.com/support.
Compliance Statement of Innovation, Science and Economic Development Canada
(ISED)
This device complies with the Innovation, Science and Economic Development
Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause
undesired operation of the device.
CAN ICES-003(B)/NMB-003(B)
Caution
- replacement of a BATTERY with an incorrect type that can defeat a SAFEGUARD (for example, in the case of some lithium BATTERY types);
- disposal of a BATTERY into a fire or a hot oven, or mechanically crushing or cutting of a BATTERY, that can result in an EXPLOSION;
- leaving a BATTERY in an extremely high temperature surrounding environment that can result in an EXPL Caution OSION or the leakage of flammable liquid or gas;
- a BATTERY subjected to extremely low air pressure that may result in an EXPLOSION or the leakage of flammable liquid or gas.
FCC COMPLIANCE INFORMATION
Per FCC Part 2 Section 2.1077
- Responsible Party: Asus Computer International
- Address: 48720 Kato Rd., Fremont, CA 94538
- Phone/Fax No: (510)739-3777/(510)608-4555
hereby declares that the product
- Product Name: Active Stylus SA203H
- Model Number: SA203H
compliance statement:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and(2)this device must accept any interference received,
including interference that may cause undesired operation.
References
- ASUS Global
- Official Support | ASUS Global
- Official Support | ASUS Global
- Anatel — Agência Nacional de Telecomunicações
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>