hama 00004633 Bluetooth Remote Control Instruction Manual
- June 1, 2024
- Hama
Table of Contents
- hama 00004633 Bluetooth Remote Control Instruction Manual
- Bluetooth Operating Instructions
- G Operating instruction
- Controls and Displays
- 1. Explanation of Warning Symbols and Notes
- 2. Package Contents
- 3. Safety Notes
- Warning Batteries
- Warning Button cells
- 4. System Requirements
- 5. Getting Started
- 6. Operation
- 6.1. Bluetooth pairing
- 6.2. Automatic Bluetooth connection (after successful pairing)
- 6.1. Bluetooth pairing.
- 6.3. Replacing the batteries
- 7. Care and Maintenance
- 8. Warranty Disclaimer
- 9. Technical Data Bluetooth Remote Shutter
- 10. Declaration of Conformity
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hama 00004633 Bluetooth Remote Control Instruction Manual
Bluetooth Operating Instructions
G Operating instruction
Controls and Displays
- LED indicator light
- ON / OFF button
- Release button
- Battery compartment cover
-
1. Explanation of Warning Symbols and Notes
Warning This symbol is used to indicate safety instructions or to draw your
attention to specific hazards and risks.
Note This symbol is used to indicate additional information or important
notes.
2. Package Contents
- Bluetooth Remote Shutter BRS2
- 1 hand strap
- 1 battery (CR2032)
-
- These operating instructions
3. Safety Notes
- Protect the product from dirt, moisture and overheating, and only use it in a dryenvironment.
- Do not use the product in areas where the use of electronic devices is not permitted.
- Do not use the product in moist environments and avoid splashes.
- Do not drop the product and do not expose it to any major shocks.
- Dispose of packaging material immediately according to locally applicableregulations.
- Do not modify the product in any way. Doing so voids the warranty.
- Use the product for its intended purpose only.
- This product is intended for private, non-commercial use only.
- Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
- Keep this product, as all electrical products, out of the reach of children!
- Do not operate the product outside the power limits given in the specifications.
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
- Do not open the device or continue to operate it if it becomes damaged.
-
Warning Batteries
-
When inserting batteries, note the correct polarity (+ and – markings) and insert the batteries accordingly. Failure to do so could result in the batteries leaking or exploding.
-
Only use batteries (or rechargeable batteries) that match the specified type.
-
Before you insert the batteries, clean the battery contacts and the polar contacts.
-
Do not allow children to change batteries without supervision.
-
Do ot mix old and new batteries or batteries of a different type or make.
-
Remove the batteries from products that are not being used for an extended
period (unless these are being kept ready for an emergency). -
Do not short-circuit batteries.
-
Do not charge batteries.
-
-
-
-
- Do not throw batteries in a fire.
-
-
-
-
Keep batteries out of the reach of children.
-
Never open, damage or swallow batteries or allow them to enter the environment. They can contain toxic, environmentally harmful heavy metals.
-
Immediately remove and dispose of dead batteries from the product.
-
Avoid storing, charging or using the device in extreme temperatures and extremely low atmospheric pressure (for example, at high altitudes).
Warning Button cells
-
Do not ingest battery, risk of burns due to dangerous substances.
-
This product contains button cells. If swallowed, the button cell can cause severe
internal burns within just two hours and lead to death. -
Keep new and used batteries out of the reach of children.
-
If the battery compartment does not close securely, stop using the product and
keep it out of the reach of children. -
If you think that batteries were swallowed or are in a part of the body, seek
medical assistance immediately.
4. System Requirements
-
The Bluetooth remote release supports Bluetooth-capable terminal devices such as smartphones and tablet PCs that run the iOS 6 or Android 4.2.2 (or newer) operating systems.
Note -
Note that support of the Bluetooth remote release depends on your terminal device.
-
Please refer to the operating instructions for the device you are using.
5. Getting Started
-
Open the battery compartment by undoing the screws on the battery cover (4) using
a screwdriver. -
Remove the battery cover (4) and insert a CR2032 battery with the correct polarity (B).
-
Close the battery compartment by putting back the battery cover and tightening the
screws using a screwdriver (B).
6. Operation
Note
-
The functions described in this section are only available for Bluetooth-capable
terminal devices. -
Note that the maximum range for Bluetooth is 10 metres without obstacles such
as walls, people, etc.
6.1. Bluetooth pairing
Note Pairing
-
Make sure that your Bluetooth-capable terminal device is on and Bluetooth is activated.
-
Make sure that your Bluetooth-capable terminal device is visible for other Bluetooth devices.
-
For more information, please refer to the operating instructions of your terminal
device. -
Slide the On/off switch (2) to the ON position to switch on the Bluetooth remote release. The control light (1) begins to flash green (slowly).
-
This means the Bluetooth remote release is searching for a Bluetooth connection.
-
Open the Bluetooth settings on your terminal device and wait until Hama BRS2 appears in the list of Bluetooth devices found.
-
-
- Select Hama BRS2 and wait until the Bluetooth remote release is listed as connected in the Bluetooth settings on your terminal device. The control light (1) begins to flash green (quickly).
-
-
You can now use the Bluetooth remote release.
6.2. Automatic Bluetooth connection (after successful pairing)
Note
- Make sure that your Bluetooth-capable terminal device is on and Bluetooth is activated.
- Make sure that your Bluetooth-capable terminal device is visible for other Bluetooth devices.
- For more information, please refer to the operating instructions of your terminaldevice.
- The Bluetooth remote release remains connected to the Bluetooth device it was last paired with.
- Slide the On/off switch (2) to the ON position to switch on the Bluetooth remote release. The control light (1) begins to flash green (slowly).
- After 35 seconds, the Bluetooth remote release automatically connects to the device.
-
-
- You can now use the Bluetooth remote release.
-
Note Connection impaired After the devices have been paired once, the connection is then established automatically. If the Bluetooth connection is not established automatically, check the following:
- Check the Bluetooth settings of your terminal device to see whether Hama BRS2
is connected. If not, repeat the steps listed under
6.1. Bluetooth pairing.
- Check whether obstacles are impairing the range. If so, move the devices closertogether.
- The performance can also be affected by a weak battery. Change the batteryif necessary.
- Only one Bluetooth device can be connected at a time. If there is an active connection to another device, deactivate this connection and try again.
6.3. Replacing the batteries
The battery has been designed to last for up to 2,000 shots, although this depends on the conditions of use. If the Bluetooth remote release does not respond after you press the release button (3), or does not connect to the terminal device, etc., change the battery as follows: See (B).
7. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents. Make sure that water does not get into the product.
8. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.
9. Technical Data Bluetooth Remote Shutter
Bluetooth version
|
3.0
---|---
Bluetooth Class
|
Class 2
Range
|
Max. 10 m
Dimensions (W xLx H)
|
35 x 35 x 15 mm
Weight
|
Approx. 10 g
Battery type
|
CR2032
10. Declaration of Conformity
Hereby, Hama GmbH & Co KG declares that the radio equipment type [00004633] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.hama.com / 00004633 / Downloads.
Frequency band(s)
|
2.402 GHz ~ 2.480 GHz
---|---
Maximum radio-frequency
power transmitted
|
0.03 mW E.I.R.P.
Hama GmbH & Co KG 86652 Monheim / Germany
Service & Support www.hama.com +49 9091 502-0 DG
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Hama GmbH & Co KG is under
license. Other trademarks and trade names are those of their respective
owners.www.hama.com/nep
All listed brands are trademarks of the corresponding companies. Errors and
omissions excepted, and subject to technical changes. Our general terms of
delivery and payment are applied.
Read More About This Manual & Download PDF:
References
- hama.com
- Recycling Information hama.com
- UCHWYT DO SMARTFONA PRO II 9,5 CM Z SAMOWYZW. BT | Hama
- Suport pentru telefon "Pro II", de 9,5 cm, cu declanșator Bluetooth "BRS2" | Hama
- "Pro II" Smartphone Holder, 9.5 cm, with "BRS2" Bluetooth® Remote Trigger | Hama
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>