BANG OLUFSEN 3511535 Beolit 20 Portable Speakers User Guide
- June 1, 2024
- bang olufsen
Table of Contents
Beolit 20
User Guide
3511535 Beolit 20 Portable Speakers
Use the Bang & Olufsen app for setup, product customization, music enhancing features and software updates.
Turn on
Press the power button to switch Beolit 20 on. The product indicator turns solid white.
Bluetooth Pairing
Press and
hold the Bluetooth button for 2 sec. The button Starts flashing blue.
When the
Bluetooth button flashes blue, make sure Bluetooth is activated on your mobile
device. Find the device list and select Beolit 20. The Bluetooth button turns
solid blue for a moment, a sound prompt is heard and Beolit 20 Is ready to
play.
Wireless Charging
Place a
device that supports wireless charging on the charging surface of Beolit 20
and ensure that both devices are in charging mode, as shown by their
respective indicators. The top LED on Beolit 20 will flash orange when it is
charging a device and the indicator will turn green when the device is fully
charged.
Playing Music
During music
playback, press the Play/Pause button to play or pause the music. Double press
to skip to the next song. Triple press to skip to the previous song. Press the
- or – button to increase or decrease the volume.
Ture Wireless Stereo
Beolit 20 can be stereo paired either in the Bang & Olufsen app or manually. To set this up manually, press and hold the Bluetooth button on the first soeaker for 5 seconds until the indicator turns white. Wait for 20 seconds until an audible prompt is heard, and then perform the same operation on the second Beolit 20. Both devices will then make an audible prompt to indicate that they are connected.
Timeld Dig Online
Register online at www.bang-olufsen.com/register-product to receive important information about product and software updates – and to get exciting news and offers from the BANG & OLUFSEN Group. If you have purchased your product at a BANG & OLUFSEN store or at www.bang-olufsen.com, you have automatically been registered