HENEX HC-4208R 2D Wireless Barcode Scanner Owner’s Manual
- June 1, 2024
- HENEX
Table of Contents
HENEX HC-4208R 2D Wireless Barcode Scanner
Product Usage Instructions
Charging the Barcode Scanner:
- To charge the barcode scanner, connect the Type-B cable to the scanner and a power source. The charge time is approximately 4 hours for a full charge.
Turning on the Barcode Scanner
- To turn on the barcode scanner, press and hold the power button until the indicator lights up. The scanner will emit a beep sound upon successful startup.
Pairing with Devices
- If using the wireless transmission mode, ensure the USB dongle is connected to your device.
- For Bluetooth pairing, enable Bluetooth on your device and scan for available devices. Follow the on-screen instructions to pair with the barcode scanner.
Scanning Barcodes
- To scan a barcode, aim the scanner at the barcode, ensuring it is within the reading range specified in the manual.
- Press the scan button or use the automatic scanning mode for hands-free operation.
FAQ
Frequently Asked Questions
- Q: What is the maximum scanning distance for different barcode types?
- A: The scanner can read EAN barcodes at distances ranging from 20mm to 200mm and QR codes from 5mm to 170mm, both at specified PCS percentages.
- Q: How long does the battery last on a full charge?
- A: The barcode scanner’s battery can operate continuously for up to 12 hours on a full charge.
- Q: Can the barcode scanner be used in different operating systems?
- A: Yes, the barcode scanner is compatible with Windows, iOS, and Android operating systems.
Product Information
- 3-in -1 transmission: 2.4G USB dongle +BT+Type-B Cable
- Reading range (open air): 2.4G:100meters BT: 40meters.
- Large 2000mAh battery, 60days standby
- Charge time is 4 hours and continuous scanning time is12hours.
- Support double firmware upgrade online: wireless and decoder.
- Support for offline storage mode,can memory 380,000 characters (EAN-13 code)
APPLICATION
- logistics, express, Warehouse inventory,Tobacco,Health care or some industrial business
TECHNICAL SPECIFICATION
HC-4208R
Decoding Capability
- 1D: UPC/EAN/JAN,UPC-A & UPC-E,EAN-8 & EAN-13, JAN-8 &JAN-13, ISBN/ISSN, Code 39 (with full ASCII), Codabar (NW7), Code 128 & EAN 128,Code 93, Interleaved 2 of 5 (ITF),Addendum 2 of 5, IATA Code,MSI/Plessy, China Postal Code,Code 32 (Italian Pharmacode)，etc.
- 2D: QR Code, Data Matrix, PDF417, Aztec, Maxicode，Dotcode，GS1 DataBar stack，etc.
Optional configuration
- one to one
- one to more
FCC STATEMENT
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.