HENEX 24G Wireless Barcode Scanner User Manual

Wireless Barcode Scanner
User’s Manual

24G Wireless Barcode Scanner

If you have any questions about the scanner, please contact us and we will provide you with the best solution. I personally promise to reply as soon as possible!
E-mail: henex@lenvii.net
https://henex-tech.com

Introduction

The scanner includes wireless 2.4G, wireless bluetooth and USB transmission mode, and supports scanner and wireless receiver firmware online upgrade.
When the scanner turns on, it will automatically enter the interface detection status. When the connection data is recognized, it will enter the wired transmission mode; otherwise, it will enter the wireless transmission mode.

Note: Factory default settings are marked with an asterisk”*” in this manual

Communication Mode

 Immediate Mode

In immediate mode, after the wire or wireless transmission is successful, the scanner emits a short sound and the blue light flashes once.
The scanner exceeds the transmission distance or send data fails, all data will be lost, at the same time, sound 3 times alarm prompt continuously and blue light flashes 3times.

Inventory Model

The scanner exceeds the transmission distance, we suggest to use inventory model.
The scanner data is storied directly in the memory. If the memory is full, three alarms will be sounds, and blue light will flash 3 times.

Note: upload all data, means that upload all data in storage.

Note: upload statistics, can see barcode total amount in storage.

Note: Delete all data, will delete all data in storage, Data will not be restored after deleting, make sure the data has been uploaded for backup before deleting.

Pair Method

1.2.4G Pair:
On 2.4G wireless mode, scan “Pair Setting” setting code, and enter into pairing mode(the blue light will flash quickly)
Plug the receiver into the USB port of device, and you will hear a sound, means pairing success, and the blue light is always on.(Pairing time is about 1 minute, if timeout is not successfully paired, it will automatically exit.)

2. Bluetooth Pair:
On Bluetooth, scan “Pair Setting “, or press the button for about 8 seconds(the scanner light will flash quickly),and enter into pairing mode.
Open bluetooth in the device, search for “Barcode scanner HID” and click the bluetooth device, you will hear a sound, the pairing is successful and the blue light is always on.
(Pairing time is about 1 minute, if timeout is not successfully paired, it will exit automatically.)

 Upload Speed Setting

Bluetooth HID Mode Function

Sound Setting

Sleep Time Setting

Shake Setting

 Language Setting

LED Indicator

1. Red light is always on, indicate that it’s charging, it will be off when charge full.
2. Connected to charge, red light flashes indicates that the battery is not installed or installed properly.
3. Regular blue light indicates wireless or wired connection normally.
4. Green light flashes quickly indicate it’s in 2.4G mode pairing.
5. Green light flashes quickly indicate it’s in SPP mode pairing.
6. Green and blue lights alternately flash quickly to indicate it’s in HID mode pairing.
7. Green and blue lights synchronous flash quickly to indicate it’s in BLE mode pairing.
8. Green and blue lights synchronous flashing slow indicate to enter the upgrade state.

Buzzer Description

successfully.
1 time short beep (low first high after)| Save scanning data in storage.
1 time short beep (high first low after)| Scan setting code
3 times short beep(low)| 2.4G send data fail or cache is full
5 times short beep(low) and stop scanning| Power off
2 times short beep(low)| 2.4G Disconnect
2 times short beep(high)| Scan the Settings code which does not work

Notes:

1. Please read this user manual carefully before using barcode scanner.

2. The charging voltage of the scanner is 5V.
   Please use our original connection cable and power adapter to ensure normal operation of scanner.

3. Our company reserves all rights and reserves the right to make changes the product to improve its reliability, functionality, or the right of design.

4. Package: Barcode Scanner 1 unit, receiver 1 unit, USB cable 1piece,User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>