Shenzhen VCHOICE Technology Co Ltd T32 Multi-Function Wireless Charger Aroma Diffuser User Manual

Shenzhen VCHOICE Technology Co Ltd T32 Multi-Function Wireless Charger

Aroma Diffuser

Product Information

• Specification
  • Material: ABS/PP
  • Voltage: 12V
  • Power: 24W
  • Frequency: 2.4MHZ
  • Capacity: 150ml
  • Atomization Amount: 25mL/hr
  • Standard: GB4706.1-2005 GB4706.48-2009
  • Origin: Shenzhen, China
• Product Contents
  • Product x1, Power Adapter x1, User Manual x1

Product Usage Instructions

• Aroma Diffuser Operation Guide
  • Open the upper cover.
  • Add an appropriate amount of water to the water tank.
  • Insert the power.
  • Touch the switch button to turn on the device.
• Clock Operation Guide
  • 12/24h Set: Press and hold the icon once for 3 seconds to switch between 12-hour and 24-hour time.
  • Alarm Set: Set the alarm time using the provided button.
  • Time Set: Set the local time by following the instructions provided.
• Product Maintenance
  • When the product is not in use, turn off the product switch and disconnect the power supply.
  • Correctly pour the right amount of water into the water tank.
  • Use soft cotton to wipe the water on the water tank and cover.
  • Wipe the atomizer gently with cotton.
  • It is recommended to clean the product regularly.

FAQs

• If the product has issues:
  • Automatic Shutdown: Ensure there is enough water in the tank and that the AC adapter is properly connected.
  • No Spray or Spray Anomaly: Check water levels in the container and clean the atomization port if needed.

Aroma Diffuser Operation Guide

• Switch Button： First-time short press the switch button, and turn on the continuous spray. The second time turn on the intermittent spray. Third time turn off the spray.
• Light Button： First time short press the light button, turn on gradient lights. The second short press switches to a fixed light colour, with each press switching the light colour until the light is turned off.
• Protection Function: Built-in water shortage protection chipset, automatically stops working after detecting the water tank without water.

Product Operations

Clock Operation Guide

• 12 Hour Clock/24 Hour Clock Time Setting Button
  • Press and hold the icon once for 3 seconds to switch between 12-hour and 24-hour time.
  • When the time is in 12-hour format, the AM/PM icon is displayed on the left side of the screen.
  • Press and hold the icon again for 3 seconds, AM/PM will disappear and the time will switch to 24-hour format.
• Alarm Time Setting Button
  • Press the icon for 3 seconds, and the clock screen will flash quickly (currently is the hour setting), click the icon continuously to set the hour, after confirming the hour, soon press and hold the icon for 3 seconds, and the minute screen will flash quickly (currently is minute setting), click the icon continuously to set the minute time after confirm the minute, release the button and wait for 5 seconds after the beep sound, the alarm icon light will light up, and the alarm clock setting is completed.
  • To cancel the alarm, press the icon for 3 seconds, and the light of the alarm icon will turn off with a beep.
  • Click any icon to cancel the ring for the day. （If there is no need to set the minute time, stop touching the button after confirming the hour time）
• Local Time Setting Button
  • Press the icon for 3 seconds, the clock screen will flash quickly (currently is the hour setting), click the icon continuously to set the hour, after confirming the hour, soon press and hold the icon for 3 seconds, and the minute screen will flash quickly (currently is minute setting), click the icon continuously to set the minute time after confirm the minute release the button to complete the local time setting.
  • Alarm clock notice: Adjust the alarm time according to the PM/AM icon when the time is in 12-hour format.

Product Specification

• Material: ABS/PP
• Voltage: 12V
• Power: ≤ 24W
• Frequency: 2.4MHZ
• Capacity: 150ml
• Atomization Amount: 25mL/hr
• Standard: GB4706.1-2005 GB4706.48-2009
• Origin: Shenzhen, China
• Wireless Charging: Available for all devices that support Qi standard smartphones and devices
• Power: 10W
• Charge Distance: 4-6 mm
• Charge Method: Electromagnetic induction

Product Contents

• Product x1,
• Power Adapter x1,
• User Manual x1

Note

• The maximum water volume of the water tank is 150 ml, and the water injection volume shall not exceed the maximum water level indication line, otherwise, the atomization effect will be affected or water leakage will cause damage to the machine
• Please fill the atomizer with pure water to avoid impurities in the water causing damage to the atomizer function and shortening its service life.
• During operation, the sound inside the water tank is the sound of atomization, which is a normal phenomenon.
• Do not roll or shake the product at work, otherwise it may cause damage.

Product Maintenance

1. When the product is not in use, turn off the product switch and disconnect the power supply.
2. Correctly pour the right amount of water into the water tank.
3. Please use soft cotton to wipe the water on the water tank and cover it.
4. Please wipe the atomizer gently with cotton.
5. It is recommended to clean the product regularly.

If you feel that there may be something wrong with this product, please confirm the following points before asking us for repair:

As soon as you turn on the switch. Less than a second. The incense machine will immediately. Automatic shutdown,| Please make sure there is water in the tank. Or is there enough water?
Please add water to the container. Is the AC adapter properly connected to this product?
Please make sure that this product is fully connected to the adapter. Please unplug the charging wire plug from this product and plug it in this product again.
No spray or. Spray anomaly| Is there too little water in the container? Or too much?
If there is not much water, please add water, and if the water exceeds the watermark, please pour out some of the water.
Is the ultrasonic atomization tablet defiled?
Please clean the atomization port in the container (wipe with a soft brush) Is the suction port at the bottom covered with dust?
If the air intake at the bottom is covered with dust, the exhaust air volume will be greatly reduced, thus. As a result, there is not enough wind to spray the fog.
Aromatherapy machine leakage| Is the upper cover covered (coincident)? reinstall the upper cover
Is the water sprinkled into the air outlet when the product is tilted or poured? Please pour all the water out of the machine, then try hard to get rid of the moisture inside, then dry it and try again.

Use requirements.

1. This product is suitable for using clean water or pure water, Do not use corrosive liquids.
2. If the operation is not correct, the water may leak into the main engine. If that case, please unplug the power immediately, pour out the water, clean the device and leave it in a ventilated place for about 3 days, let it dry naturally before using it. If there is any other abnormal situation, please contact the local dealer or contact us directly.

FCC

This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimetres from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, is the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498. To ensure the correct use of the product, please read this user manual carefully.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>