GAMDIAS AURA GC2 Mid-Tower PC Case Installation Guide
- June 12, 2024
- GAMDIAS
Table of Contents
AURA GC2 Mid-Tower PC Case
Installation Guide QUICK
INSTALLATION GUIDE
GC2
Mid-Tower PC Case
SPECIFICATIONS
| SERIES | AURA Series |
|---|---|
| Product Name | AURA GC2 |
| Case Type | MID Tower |
| Dimension (L x W x H) | 352 x 200 x 442 mm |
13.9 x 7.9 x 17.4 inch
Chassis Dimension (L x W x H)| 305 x 200 x 430 mm
12 x 7.9 x 16.9 inch
Motherboard Support| ATX, Micro-ATX, Mini-ITX
Expansion Slots| 7
Material| SPCC , ABS , Tempered glass
Window| Left
Radiator Support| Top: 240 mm
Rear: 120 mm
Fan Support| Top: 2 x 120mm
Front: 3 x 120mm , 2 x 140mm
(It is recommended to install your fans on the inner side of the front panel)
Rear: 1 x 120mm
Pre-installed Fans| Front: 3 x 120mm ARGB Fan
Rear: 1 x 120mm ARGB Fan
Pre-installed Control BOX| NO
Motherboard Sync| 5V 3-Pin Addressable Header
Drive Bays| 2 x 3.5″ or 1 x 2.5″+1 x 3.5″(HDD Cage) 2 x 2.5″
Clearance| CPU cooler height limitation: 160mm
VGA length limitation: 260mm
PSU length limitation: 150mm
I/O Port| USB 3.0 x1, USB 2.0 x2, HD Audio x1, LED Control x1
Note| It is recommended to install the cooling system bracket before mounting
the motherboard
EXPLODED VIEW PARTS
PARTS
| 1 | Chassis Body |
|---|---|
| 2 | Screw |
| 3 | Tempered Glass Side Panel |
| 4 | Rubber Foot |
| 5 | HDD Cage |
| 6 | Front Panel |
| 7 | Right Side Panel |
| 8 | IO Port |
| 9 | Top Dust Filters |
| 10 | 120mm ARGB Fan |
ACCESSORY
| Figure | Parts Name | Qty | Used for |
|---|---|---|---|
| Stand-off 4.75 x 9.5 x 6.5mm | 3 | Motherboard | |
| Screw #6 x 6 mm | 6 | PSU | |
| Screw #6 x 5 mm | 9 | HDD | |
| Screw M3 x 5 mm | 18 | 2.5″ HDD/Motherboard/ODD | |
| CableTie | 5 | Cable Management |
SIDE PANEL REMOVAL
Remove the side panel
Remove the side panel
Lay
down the chassis
Install the motherboard in proper location and secure it with screws
PSU INSTALLATION
Place the PSU in proper location
3.5″ 2.5″ HDD INSTALLATION
A. 3.5″ HDD
Align the HDD into the mounting holes and screw in.
B. 2.5″ SSD
Align the SSD into the mounting holes and screw in.
AIR COOLING COMPATIBILITY
Top………………………….. 120 mm x 2
Front …………………120 mm x 3 or 140 mm x2
Rear ……………………….120 mm x 1
RADIATOR COMPATIBILITY
Front……………………… 240 mm
Rear………………………….. .120 mm
I/O PORTS
| 1 | Power Button |
|---|---|
| 2 | Fan LED Control 1 |
| 3 | USB2.0 |
| 4 | Headphone |
| 5 | Mic |
| 6 | USB 2.0 |
| 7 | USB 3.0 |
1 Sync With Motherboard : Press and Hold the Fan LED Control Button for 3 Seconds.
I/O CONNECTORS
See
your motherboard’s manual for front panel header locations and pin-outs.