SONART EP23879 Active Plastic Speaker Instruction Manual

SONART EP23879 Active Plastic Speaker

Product Usage Instructions

• Before You Start
  • Read all safety information in the instruction booklet before proceeding with the setup.
• Assembly
  • Scan the QR code for detailed assembly instructions.
• Operation
  • Before switching on, turn the volume down to the minimum level.
  • Connect the audio source to the appropriate input socket on the speaker.
  • Connect the speaker to the main supply.
  • Switch on the audio source first, followed by turning on the active speaker.
  • Adjust the volume using the control on the speaker.
  • You can adjust the bass and treble settings to your preference.

FAQs

• Q: How do I contact customer support?
  • A: You can reach our friendly customer support team via email at the following addresses:
  • USA: cs.us@costway.com.
• Q: What should I do in case of difficulty during setup?

  •   *  **A:** If you encounter any difficulties during setup, please contact our customer support team for assistance.

Before You Start

• Please read all instructions carefully.
• Retain instructions for future reference.
• Separate and count all parts and hardware.
• Read through each step carefully and follow the proper order.
• We recommend that, where possible, all items are assembled near the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
• Always place the product on a flat, steady and stable surface.
• Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.
• CAUTION, TO REDUCE THE RISK OF OFELECTRIC SHOCK, D0 DOES NOT REMOVE THE COVER [OR BACK]
• THIS PRODUCT MUST BE EARTHED
• NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

OPERATION

1. Before switching on, turn the volume down to a minimum.
2. Connect the audio source to the appropriate input socket.
3. Connect to the mains supply.
4. Switch on the audio source, followed by the active speaker.
5. Set the volume with the applicable control.
6. Adjust the bass + treble.
7. Bluetooth connection instruction.
   • Select the “BT” mode of the MP3.
   • Open the Bluetooth function on your pairing device and find PA15.
   • Select PA15 to complete pairing
   • Input password “0000” if asked for.
   • Select the song and play on your mobile device

INSTRUCTIONS

• Do not overload the box to avoid damage to the speakers.
• Do not place an open fire (candles etc) on top or next to the box – FIRE HAZARD.
• Connect to an earthed mains outlet of 110V/220V 60~50Hz.
• For indoor use only. If the box is used outdoors, you need to make sure that no humidity can enter the box.
• When not in use, unplug the unit from the mains.
• Unplug the unit from the mains before checking or replacing the fuse.
• Make sure that the box is placed on a stable, strong surface.
• The boxes can be hung. Use only strong and approved mounting material. During the mounting, make sure that nobody is standing below the mounting area.
• Do not place liquids on the box and protect it against humidity. Humidity can shorten the lifetime considerably.
• Only use suitable means of transportation if you want to move the box – BEWARE OF YOUR BACK !!
• Always unplug the unit during a thunderstorm or when it is not in use.
• If the unit has not been used for a long period, condensation can occur inside the housing. Please let the unit reach room temperature before use.
• Never try to repair the unit yourself. It does not contain any user-serviceable parts.
• Run the mains lead in such a way that nobody can fall over it and nothing can be put in it
• Set the unit to the lowest volume before switching it on.
• Keep the unit out of the reach of children.

SPECIFICATIONS

CONTROLS LOCATION

1. LCD screen
2. MP3 control
   • MODE: USB/SD/BT/F M converter
   • Play / Pause
   • FOL: Long press 3 seconds to enter the folder option function mode(press the previous/ next songs button to choose the folder)
   • : Repeat one / Repeat All / Random
   • Previous Song Long press for fast rewind
   • Next Song Long press for fast-forward
3. SD card input
4. USB input
5. Bass control for low frequencies
6. MP3 level control
7. Treble control for high frequencies
8. Clip LED indicator
9. Power LED indicator
10. Volume control
11. XLR line output
12. Line input level control
13. Mic input level control
14. XLR microphone input
15. XLR line input
16. 6.35mm microphone input
17. 3.5mm line input
18. RCA phone(R+L) line input
19. Speaker out 8 Ohm
20. Fused IEC mains inlet
21. 110V/220V switch
22. Main power switch
23. IR Remote control receiver

• When connecting the speakers, it is very important to observe the correct polarity.
• This means that the wire attached to the (+), red, or positive terminal on one component must be attached to the (+), red, or positive terminal on the corresponding component’s speaker output terminals.
• Similarly, the (- ), black, negative, or ground terminals must connect to the respective(- ), black, negative, or ground terminals.
• This is easy to do by locating the colour, stripes, or ribbing that appears on most wires.

Return / Damage Claim Instructions

• DO NOT discard the box / original packaging.
  • In case a return is required, the item must be returned in the original box. Without this, your return will not be accepted.
• Take a photo of the box markings.
  • A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps our staff identify your product number to ensure you receive the correct parts.
• Take a photo of the damaged part (if applicable).
  • A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged.
• Send us an email with the images requested.
  • Email us directly from the marketplace where your item was purchased with the attached images and a description of your claim.

FCC

Labelling requirements.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Information to the user.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Information to the user.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

CONTACT

• USA office: Fontana
• AUS office: Truganina
• GBR office: Ipswich
• FRA office: Saint Vigor d’Ymonville

If you’re having difficulty, our friendly customer team is always here to help.

• USA: cs.us@costway.com.
• AUS: cs.au@costway.com.
• GBR: cs.uk@costway.com.
• FRA: cs.fr@costway.com.

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Scan the QR code for assembly instructions

Documents / Resources

| SONART EP23879 Active Plastic Speaker [pdf] Instruction Manual
EP23879, EP23879 Active Plastic Speaker, Active Plastic Speaker, Plastic Speaker, Speaker
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>