SONART FP10766 Active Plastic Speaker Instruction Manual

June 1, 2024
SONART

SONART FP10766 Active Plastic Speaker

SONART-FP10766-Active-Plastic-Speaker-PRODUCT

Specifications

  • Product: Powered PA Speaker System
  • System: Active 2-way full range
  • Woofer: 15″
  • Tweeter: 1″
  • RMS Power: 300W
  • Peak Power: 1500W
  • Impedance: 4 ohm
  • Frequency Range: 50Hz – 18KHz
  • Sensitivity: 94dB (+/- 2dB)
  • Connector: XL R/6.35mm/RCA
  • Mic Input Level
  • Line Input/Output Level
  • Voltage

Product Usage Instructions

Before You Start

Before using the speaker system, please read and understand the safety information provided in the instruction booklet.

Operation

  1. Turn the volume down to a minimum before switching on the speaker system.
  2. Connect the audio source to the appropriate input socket on the speaker system.
  3. Connect the speaker system to the main supply following the provided guidelines.
  4. Switch on the audio source first, followed by turning on the active speaker system.
  5. Adjust the volume using the control knob to your desired level.
  6. Adjust the bass and treble settings for optimal sound quality.
  7. For Bluetooth connection, refer to the Bluetooth connection instructions provided in the manual.

FAQ

Q: What should I do if I encounter electric shock risk?

A: In case of any electric shock risk, do not attempt to open the speaker system. Disconnect it from the main supply and seek professional assistance.

Q: How do I ensure a proper connection for microphone input?

A: Use the appropriate connector (XL R/6.35mm/RCA) for microphone input and adjust the mic input level according to your requirements.

Q: Can I connect multiple audio sources simultaneously?

A: Yes, you can connect multiple audio sources by utilizing the line input/output levels and selecting the desired source using the controls on the speaker system.

Before You Start

  • Please read all instructions carefully.
  • Retain instructions for future reference.
  • Separate and count all parts and hardware.
  • Read through each step carefully and follow the proper order.
  • We recommend that, where possible, all items are assembled near the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
  • Always place the product on a flat, steady, and stable surface.
  • Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.
  • CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN
  • CAUTION, TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
  • THIS PRODUCT MUST BE EARTHED.
  • NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

OPERATION

  1. Before switching on, turn the volume down to a minimum.
  2. Connect the audio source to the appropriate input socket.
  3. Connect to the mains supply.
  4. Switch on the audio source, followed by the active speaker.
  5. Set the volume with the applicable control.
  6. Adjust the bass + treble.
  7. Bluetooth connection instruction.
    • Select the “BT” mode of the MP3.
    • Open the Bluetooth function on your pairing device and find Bluetooth.
    • Select Bluetooth to complete pairing.
    • Input password “0000” if asked.
    • Select the song and play it on your mobile device.

INSTRUCTIONS

  • Do not overload the speaker to avoid damage to the speaker.
  • Do not place an open fire (candles, etc) on top or next to the speaker FIRE HAZARD.
  • Connect to an earthed mains outlet of 120V/240V 60~50Hz.
  • If the speaker is used outdoors, you need to make sure that no humidity can enter the speaker.
  • When not in use, unplug the unit from the mains.
  • Unplug the unit from the mains before checking or replacing the fuse.
  • Make sure that the speaker is placed on a stable, strong surface.
  • The speaker can be hung. Use only strong and approved mounting material. During the mounting, make sure that nobody is standing below the mounting area.
  • Do not place liquids on the speaker and protect it against humidity Humidity can shorten the lifetime considerably.
  • Only use suitable means of transportation if you want to move the speaker – BEWARE OF YOUR BACK !!
  • Always unplug the unit during a thunderstorm or when it is not in use.
  • If the unit has not been used for a long time, condensation can occur inside the housing. Please let the unit reach room temperature before use.
  • Never try to repair the unit yourself. It does not contain any user-serviceable parts.
  • Run the mains lead in such a way that nobody can fall over it and nothing can be put on it.
  • Set the unit to the lowest volume before switching it on.
  • Keep the unit out of the reach of children.

SPECIFICA TIONS

15″ Powered PA Speaker System

System Active 2-way full range
Woofer 15”
Tweeter 1”
RMS power 300W
Peak Power 1500W
Impedance 4 ohm
Frequency Range 50Hz- 18KHz
Sensitivity 94dB (+/- 2dB)
Connector XL R/6.35mm/RCA
Mic Input Level <10mV
Line Input/Output Level 250mV
Voltage 120/240v AC 60/50Hz

CONTROLS LOCATION

  1. LCD screen
  2. MP3 control
  3. USB input
  4. SD card input
  5. Band EQ control
  6. Mic1 input level control
  7. Mic 2 input level control
  8. Line input level control
  9. Volume control
  10. Power LED indicator
  11. Clip LED indicator
  12. XLR microphone 1 input
  13. 6.35mm microphone 1 input
  14. RCA(R+L) line input
  15. 3.5mm input
  16. XLR Line input
  17. XLR line output (balanced)
  18. LED switch(ON/OFF)
  19. Fade in IEC mains
  20. Power Switch
  21. 120/240V Switch
  22. IR Remote control receiver

Power

  • Flip the switch UP to turn ON the speaker.
  • Flip the switch DOWN to turn OFF the speaker.
  • Connect the POWER INPUT port to an external power source using the included power cord.

Bluetooth Pairing

  1. Place your mobile device within 1 meter/3.3 ft of the speaker. Make sure Bluetooth is enabled on your mobile device.
  2. Press the MODE button to set the speaker to Bluetooth mode.
  3. Select “ Bluetooth” on your mobile device to pair with the speaker.

10 meters/33 ft max connection range after being paired. Moving devices outside this range may cause disruption or signal loss.

Return / Damage Claim Instructions

  • DO NOT discard the box / original packaging.
  • In case a return is required, the item must be returned in the original box. Without this, your return will not be accepted.
  • Take a photo of the box markings.
  • A photo of the markings (text) on the side of the box is required in case a part is needed for replacement.
  • This helps our staff identify your product number to ensure you receive the correct parts.
  • Take a photo of the damaged part (if applicable).
  • A photo of the damage is always required to file a claim and get your replacement or refund processed quickly.
  • Please make sure you have the box even if it is damaged.
  • Send us an email with the images requested.
  • Email us directly from the marketplace where your item was purchased with the attached images and a description of your claim.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference,
  2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement:

  1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
  2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals