Wuhan TWS5.0 Bluetooth Headset User Manual

Wuhan TWS5.0 Bluetooth Headset

Product Function

TWS5.0 Bluetooth headset manual

• Matching mode: automatic matching
• Power-on prompt: power-on.
• Power off prompt: power off.
• Pairing status: Bluetooth connected
• Connection status: Bluetooth is connected
• Low power hint: low power.

Key functions:

• Power on: long press 3 seconds to power on
• Power off: long press 3 seconds to power off
• Pause/play: click music to pause
• Answer/hang up the phone: / click on the incoming call to answer/hang up the phone
• Last place redial phone: double-click the last place to replay
• Last hit: three hits last hit
• Next song: Three Strikes next song
• Voice assistant/Sir : Long press 2 seconds to summon Sir
• Language switch: Double-click on the matching red and blue lights
• Unconnected standby: automatically shuts down after 10 minutes.

Specification

Product parameter information

• Bluetooth version: V5.0
• Move the charging bin parameters
• Input current 5V 1A
• Output current 5V 500MA
• Charging time of charging warehouse: about 1H
• Operating temperature: -10°C-55°C

Operating instructions

• Special note: if you use the headset for the first time or use it again after 1 hour, you need to take out the headset and put it back The charging warehouse wakes up the earphones, realizing the function of earphone automatically starts The marching the fate a by the time they are the fan, please follow the following stents
• Steps: turn on both earphones at the same time. The red and blue lights flicker alternately for about 5 seconds Move the left and right earphones to connect, TWS team successfully. When the time to play the mobile phone Bluetooth can be paired to a search connection, after the successful pairing of the headset to the project will not flash mode.
• Operation steps for the use of one earphone: take out any earphone from the charging warehouse and turn it on. The red and blue lights will flicker alternately. At this time, turn on the phone’s Bluetooth to pair the search connection.
• Call voice assistant: after the headset is connected to the standby process, long press for 2 seconds to release the hand to wake up the voice assistant (SURI) function;
• Master-slave switching operation: after the TWS is connected, it can be used independently regardless of the main and secondary connections (if one headset is without electricity or charging state, the normal use of the other headset will not be affected), and the two headphones can be used as the main sound channel alternately.
• Bluetooth reconnect operation: if the Bluetooth and the phone have been paired successfully and the phone has not deleted the address code information (pairing name), the headset can be automatically reconnected by restarting the headset (or after the headset is plugged into the charging bin, it will automatically reconnect by unplugging the headset). earpiece

1. Put the earphones in the charging compartment, and the earphones will display a red light. The charging bin will display a blue light that is always on, indicating that the charging bin has electricity and the charging bin lamp of the headphone box will be off when the headset is charged.
2. When the blue light of the charging bin is lower than 1 Cord out an hour after the battery is fully charged, 4 blee lights will always be on;

Notes:

1. Please do not drop, hit, scratch, twist, hit, crush, or throw the Bluetooth headset into the water.
2. When using a Bluetooth headset, keep it away from the magnets, appliances, and speakers;
3. Try to avoid placing the Bluetooth headset at the extreme temperature (use the ambient operating temperature range of -10°C-45°C).
4. Avoid exposing the Bluetooth headset to a damp environment;
5. If you do not use the Bluetooth headset for a long time, pend the service lie of the heads every other week to
6. Do not let the Bluetooth headset near the fire source;
7. Please do not put the Bluetooth headset and charging bin beside inflammable and explosive articles;
   • Safety instructions: please use a standard de charger (DC5v/ 500ma-za) for charging the charging bin. Do not remove the charging bay and Bluetooth headset. Or insert other items into the product to avoid damage or even injury to you.

Serious warning:

• Do not use this product while charging, please use the adapter designated by the manufacturer to charge the product.
• Do not disassemble the lithium electronic battery and place it in the fire. Do not allow metal objects to touch or short-circuit the electrode.
• Do not knock or squeeze the battery, avoid placing it in an environment of damp corrosion or overheating (>60°C).

Packing list:

• Bluetooth headset 2pcs charging box 1pcs instruction manual 1pcs
• 1 charging cable

FCC

FCC Statement

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received. including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>