Wuhan Linptech K9C-W3 Self-Powered Wireless Switch User Manual
- June 5, 2024
- Wuhan Linptech
Table of Contents
Wuhan Linptech K9C-W3 Self-Powered Wireless Switch User Manual
Product Description
K9C series self-powered wireless switch
K9Cseries self-powered wireless switch is a wireless signal transmitter without wiring and battery. It can be used in conjunction with the corresponding receiver/wall switch/gateway to perform lighting control, linkage and other functions. Please refer to the receiver/wall switch/ gateway ma nu al for the usage and pairing operation details.
K9C series self-powered wireless switches use innovative self-powered tech no logy to collect the instantaneous energy of the switch and use it to send wireless sign a ls.
Therefore, a battery is not required, which avoids the trouble of changing a battery and protects the environment.
Installation Instructions
Technical Info
Environmental protection
The device and its accessories (if included) should not be disposed of with
household garbage. Disposal of the device and its accessories is subject to
local regulations. Support proper collection and recycling.
Disposal and recycling information
This symbol (with or without a solid bar) on the device, and/or the packaging, indicates that the device and its electrical accessories (for example, a cable) should not be disposed of as household garbage. These items should not be disposed of as unsorted municipal waste and should be taken to a certified collection point for recycling or proper disposal. For more detailed information about device, contact your local city office, household waste disposal service, or retail store. Disposal of the device is subject to WEEE Directive Recast (Directive 2012/19/EU).The purpose of separating WEEE from other waste is to minimize the potential environmental impacts and human health risk of any hazardous substances that may be present.
Reduction of hazardous substances
This device is compliant with the REACH Regulation [Regulation (EC) No 1907
/2006] and Ro HS Directive Recast (Directive 2011/65/EU).
EU regulatory conformance statement
Hereby, Wuhan Lintec Co., Ltd. declares that this device is in compliance with
the essential requirements and other relevant provisions of2014/53/EU.
The following marking is included in the product:
This device may be operated in all member states of the EU. Observe national and local regulations where the device is used. This device may be restricted for use, depending on the local network.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits a
re designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. such modifications
cued void the user’s authority to operate the equipment. The device has been
evaluated to meet general RF exposure requirement. To maintain compliance with
FCC’s RF exposure guidelines, the distance must be at least20 cm between the
radiator and your body, and fully supported by the operating and installation
configurations of the transmitter and its antenna(s).
Warranty Card
Dear valued customer:
Thank you for selecting the K9C self-powered wireless switch. In order to
improve our service, please fill in the warranty card information carefully.
Warranty Card
Name _
Add __
Tel ____
Product type _
Fault reason _____
Date of purchase ____
- The warranty is valid for 12 months from the date of purchase.
- If you need to make a claim under warranty, please provide proof of purchase along with the warranty-card.
- If the fault is due to misuse, or incorrect installation, the warranty will be invalidated.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>