Wuhan Tianyu S40 Smart Mobile Terminal User Manual

Wuhan Tianyu S40 Smart Mobile Terminal

Product Information

Specifications :

• Model: [Insert Model Number]
• Brand: [Insert Brand Name]
• Compliance: FCC RF exposure guidelines
• Body Worn Operation: Yes
• Recommended Distance: Minimum 5mm to the body

Product Usage Instructions

When using this device in body-worn operation, please ensure the following:

1. Use only accessories designated for this product or accessories that contain no metal.
2. Maintain a minimum distance of 5mm between the device and your body during normal use.

How to Wear the Device:

1. Attach the device to the designated body-worn accessory.
2. Position the device on your body with the recommended 5mm distance.
3. Ensure the device is securely fastened to prevent movement during use.

Device Care Tips:

1. Regularly clean the device and accessories according to the manufacturer’s instructions.
2. Avoid exposing the device to extreme temperatures or moisture.
3. Store the device in a safe place when not in use to prevent damage.

Battery Information:

1. Use only the recommended batteries for this device.
2. Follow proper charging procedures to maintain battery life.

Frequently Asked Questions (FAQ):

• Q: Can I use any accessory with the device for body-worn operation?
  A: It is recommended to use accessories designated for this product or those that do not contain metal to ensure compliance with FCC RF exposure guidelines.

• Q: What should I do if the device is not maintaining the minimum distance from my body?
  A: If the device is not staying at the recommended 5mm distance, adjust the positioning or consider using a different body-worn accessory that allows for proper placement.

Please read the below information before using your device:

• Since you took the device out of the package, the battery is off.
• When using the device for the first time, please perform a full charge and discharge.
• To ensure the charging effect of the device, please use the original power adapter and USB data cable.
• The device is built with a removable battery and back cover, please remove the battery before turn power off.
• Do not open or disassemble the device or attempt to repair it or replace any components, if you attempt to open your device, you risk damaging the device, and such damage isn’t covered by the limited warranty on your device.
• The pre-made software of the product Includes settings, a gallery, hardware testing, and file management. The detailed information of the software can be queried through settings Apps.
• For altitude 5km below use ONLY.
  Note : There Is a danger of explosion when replacing the battery with the wrong type. Please be sure to dispose of the used battery according to the instructions on the battery.

ACCESSORIES

DEVICE KNOWLEDGE

1. Type-C USB OTG
2. Power Button
3. Volume Button
4. NFC RHder
5. Front-Facing Carner
6. Printer Case
7. Indicator Lamp
8. Microphone
9. Rear Camera
10. Flashlight
11. Speaker
12. Battery

CHARGE THE BATTERY

Note : It is recommended that charge the battery before sterling lo use the device.

1. Insert the Type-C connector of the USB data cable into the Type-C interface of the device.
2. Insert the other end of the USB data cable into the port at the end of the power adapter.
3. Insert the power plug of the power adapter into the power socket to start charging the battery.

Highest operating frequency: 5825MHz
Adapter output : DC 5.0V,2.0A,10.0W

INSTALL SIM/TF CARD

Note : Please make sure that the power of the device Is turned off.

1. Lay the device flat with the reverse side facing up.
2. Open the back cover and take out the battery.
3. Please insert the SIM/TF card in the direction shown in the figure.
4. Install the battery and close the back cover.

WARRANTY TERMS

• Name of Product:
• Model of Product:
• Manufacturer: Wuhan Tianyu Information
• Industry Co., Ltd,

Warranty Terms & Conditions:

1. We will provide you with excellent after-sales service.
2. Damage such as a user due to human factors, the company’s repair charge maintenance fees
3. Please keep this card, the warranty will based on it.

CERTIFICATE OF QUALITY

The product has been tested and proved one qualified for delivery.

• Inspector:
• Inspection Date:

INSTALL PRINTER PAPER

This device supports 58mm thermal paper with the specifications of 57 mm+0.5mm*40mm.

1. Please open the paper container with the uncovering handle, please do not force open the paper container to avoid print hard gear wear;
2. Feed the paper correctly into the paper container in the direction as shown and pull some paper outside the cutter;
3. Close the cover of the paper container to finish printing paper feeding.

OPERATION

Touch The Contactless Caret
Please use the card near the contactless card reader area.

FCC

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

In all EU member states, operation of 5150-5350 MHz is restricted to indoor use only.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. The device has been tested and complies with FCC SAR Timits.

For body worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal. Please keep the device a minimum of 5mm to the body when normal use.

Copyright:
The author of this manual reserves all copyright exclusive rights by the Copyright Law. Without the prior consent of the author, copying, additions, deletions, excerpts, reprints or reprints of part or all of this manual are not allowed. The content of this manual only explains the use of the products manufactured by the author. Regarding the contents of this manual, the author does not bear any express or implied guarantee or guarantee responsibility.

Statements
The company does not assume responsibility for the following actions: Damages caused by use and maintenance without complying with the conditions specified in this guide; The company will not assume any responsibilities for the damages or problems caused by optional items or consumables (rather than the initial products or approved products of the company). The customer is not entitled to change or modify the product without our consent. The product’s operating system supports official system updates, but if you change the operating system into a third-party ROM system or alter the system files by system cracking, it may cause system instability and security risks and threats.

Disclaimer
As a result of product upgrading, some details in this document may not match the product, and the actual product shall govern. The company reserves the right of interpretation of this document. The company also reserves the right to alter this specification without prior notice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>