PROVISION WP-919 Compact IP Camera Installation Guide

PROVISION WP-919 Compact IP Camera

PnV2 App Installation

a. Install the free ‘Provision PnV2’ App on your device.
b. Open the App and register for it.

Scan for ios/Android

|
---|---

Registration

1. Click on ‘Register new’ or ‘Quick Registration.’

2. Input the desired username and password.
   Note: The username must be at least 6 characters long, and the password at least 8 characters (letters and digits.)
   3.Click on ‘Submit.’
   Note: After registration, it is recommended to bind an email address with the account for password reset (if necessary.)

Add Camera

A. Camera Installation using the App’s QR code
(The camera is reset and connected to power only (no network cable))

1. The camera will prompt the message: “wireless connection waiting.”

2. On the home page, click the at the upper left corner or the ‘Add device’ button.
   Note: for this procedure to be successful, your smartphone must be wirelessly connected to the same network you want the camera to connect to.
   

3. Click on the ‘Others’ icon located at the bottom of the scan page.

4. Choose the ‘ Scanning QR code option.’
   
   

5. Tick the circle   to confirm that the required preparations have been completed.

6. Click on ‘Next.’
   
   

7. The WiFi network the smartphone is connected to will be displayed. Please ensure it is the right network before proceeding.

8. Please enter the wireless network’s password and click ‘OK.’

9. A pop-up message will ask you to confirm the password. Click on ‘Confirm it’ to continue.
   

10. Please place the QR code display on your phone screen in front of the camera lens from a distance of 15-30 cm.

11. If the scan is successful, the App will prompt the message: “wireless connection success.”

12. Click the ‘Add it’ button in the pop-up window to finish the camera installation process.

13. After the camera has been added successfully, you can start watching by clicking the button on the home page.

B. Wireless Installation (supported on specific models only)
(The camera is reset and connected to power only (no network cable))

1. The camera will prompt the message:
   “Wireless connection waiting.”

2. On home page, click the at the upper right corner or the ‘Add device’ button.
   Note: for this procedure to be successful, your smartphone must be wirelessly connected to the same network you want the camera to connect to.

3. Scan the QR code located at the bottom of the camera.

4. Tick the circle to confirm that the required preparations have been completed.

5. Click on **‘Next.’

Note:** If the App fails to scan the QR code on step 3, you can add the camera wirelessly by clicking on the ‘Others’ icon located at the bottom of the scan page, selecting the ‘New sound wave’ option, and repeating steps 4-12.

6. The WiFi network the smartphone is connected to will be displayed. Please ensure it is the right network before proceeding.

7. Please enter the wireless network’s password and click ‘OK.’
   
   

8. A pop-up message will ask you to confirm the password. Click on ‘Confirm it’ to continue.
   

9. The App will transmit an encrypted connection sound. Please ensure the mobile phone volume is maximum and as close to the camera as possible.
   

10. When the wireless synchronization is finished, the App will prompt the message:
    “ wireless connection success.”

11. Click the ‘ Add it ‘ button in the pop-up window to finish the camera installation process.
    

C. Camera Installation by local network search

(The camera is reset, connected to power, and to the router)

Note: for this procedure to be successful, your smartphone must be wirelessly connected to the same network you want the camera to connect to.

1. On the home page, click the at the upper right corner or the ‘Add device’ button.

2. Click on the ‘Others’ icon located at the bottom of the scan page.

3. Click the ‘LAN installation’ option.

4. Click on “ Already connected to Ethernet cable ” at the bottom of the screen.

5. The App will perform a search for the camera on the network.

6. If the camera is connected correctly, the App will locate it and ask to add it.

7. Click the ‘ Add it ‘ button to finish the camera installation process.

D. Manual Installation

(The camera is reset, connected to power, and to the router)

1. On the home page, click the at the upper right corner or the ‘Add device’ button.

2. Click on the ‘Others’ icon located at the bottom of the scan page.

3. Click the ‘Add manually’ option.

4. Click the ‘scan’ icon and scan the QR code located on the side or bottom of the camera, or enter the camera’s UID using the keyboard.

5. Enter the default password: 888888

6. Click the ‘OK’ button to finish the camera installation process.

Additional Actions

A. Camera Sharing

1. Click the settings (gear icon) located below the camera image on the home page.

2. Click the ‘Device sharing’ option.

3. Click on ‘ QR code sharing.’

4. You can save the QR code as an image to your mobile phone gallery by clicking ‘Save pictures’ at the bottom of the screen and sending it to the user with whom you share the camera.
   Important: the code is dynamic and valid for about half an hour.

5. If the camera sharing is successful, the user with whom it is snared will be asked to add it.

B. Cloud Storage

1. Click the cloud icon located below the Camera image on the home page.
2. Pick the desired plan (there are two: 7-day and 30-day retentions.) Cloud recordings are motion based only!
   Note: Cloud recordings are accessible
   Depending on the purchased plan, even if The camera is unplugged or stolen.
   The recordings are available if the camera has yet to be alerted from the account.

C. Camera Reset

1. The camera is connected to power.
2. Turn the camera head vertically to reveal the SD card slot and the Reset button.
3. Press the Reset button for 10 seconds or Until you hear the message prompt: “ Device will restart.”

CUSTOMER SUPPORT

The guide is available for download at the company’s website: www.pikok.co.il

Technical Support:
Website: http://pikok.co.il
Tel: 073-7500848 / WhatsApp: 050-7337235
Provision-I SR Group, 11 Atir Veda St., Kfar Sava, 4464310

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>