smart solar 49749 Water Mill Fountain Instruction Manual
- June 9, 2024
- Smart Solar
Table of Contents
smart solar 49749 Water Mill Fountain
CONTENTS
ASSEMBLY
- Slide open door
- Locate tube and connect to pump
- Place pump inside reservoir
- Fill reservoir with water
- Close door
- Connect pump to solar panel
- Remove light unit, switch
Ensure connectors are watertight.
FROST
Frost causes damage, so we recommend that you store the whole fountain inside during cold weather.
PERFORMANCE
This product is designed primarily to operate in summer months but will also work in spring and autumn provided there is good sunshine. Performance is directly related to the amount and strength of sunlight received.
The water pump is only operational during the day.
Light run time
POSITION
Position the solar panel to receive the maximum amount of sunlight.
MAINTENANCE
Use water or glass cleaner
PUMP CLEANING
We recommend regular maintenance and water changes to ensure optimum performance.
CHANGE BATTERY
1 x AAA 1.2V 400mAh Ni-MH
Replaceable and rechargeable battery included
BATTERY DISPOSAL
Dispose of batteries according to local regulations.
PROBLEM-SOLVING
- Check the solar panel is positioned correctly
- Check that the pump filter is clean
- Check that there is sufficient water in the bowl
- Check that there is no debris in the bowl blocking the pump
- If problems persist please contact customer services
- If light stops working switch off for 3 days to allow charge to build up. If still not working change the battery.
1 YEAR WARRANTY
Email: [email protected]
Tel: +44(0)1443 843306
www.sgpuk.com
Smart Garden Products Ltd, 2 Pentagon South, Barton Lane, Abingdon,
Oxfordshire, OX143PZ
9 Rue de Conde, 33000 Bordeaux, France.