PROVISION ISR TM-54In1-8 Service Color LCD Monitor User Manual
- June 13, 2024
- PROVISION-ISR
Table of Contents
PROVISION ISR TM-54In1-8 Service Color LCD Monitor User Manual
General
“The new HD CCTV Test monitor support “4in1” (AHD/ TWICW/ CVBS)video format of up to 2MP~8MP resolution. It also support PTZ control by RS485 and other special features succahs DC 12V/USB/5V out put, audio test, UTP cable test, LED lighting etc. Itis designed to bring installer maximum convenience during the instalation.
Product Funtions:
Video input: Compatible with AHD, TVI, CVI, CVBS signals of up to 2MP~8MP
resolution.
- 4.3inch 800(RGB) x480 resolution. PALNTSC(Auto adapt).
- PTZ control: RS485 Baud-Radu: 1200 ~ 115200bps, ‘compatible with PELCO-DIP protocols.
- Camera Power Supply: Power output of DC 12V/1A for temporarily powering on cameras for angle and zoom adjustment
- USB Power Supply: USB2 Dinterface provides 5V/1A power output
- Audio signal input
- Enhanced UTP cable, with indicator lights. the cable test distance can reach 100-150 meters. 7.COC controlicall OSD menu
- Video Test AHD tester support 720P 25F/30F1080P/25F/30F (4MP/ SMP/BMP AHD camera tester is optional) TV tester support 720P 25F/30F 1080P 25F/30F(3MP/ AMP/SMP/BMP TVI camera tester is optional) CV Itester support 720P 25F/30F 1080P 25F/30F(AMP/ SMP/BMP CVI camera tester s optional*)
- LED emergency lighting
- bultin 3.7V Lithium polymer bottery, 3000mAn
Product Accessories\
- Test monitor
- Wrist band
- DC output cable
- Audio test cable .
- Network cable test convertor
- USB cable
- EUIUS Power adapter
Front Panel
| 1 | Power Indicator | |
|---|---|---|
| 2 | 12V output power indicator | |
| 3 | Data transmission indicator | |
| 4 | Power on indicator |
| 5 | ZOOM+(For PTZ control) | |
|---|---|---|
| 6 | ZOOM-(For PTZ control) | |
| 7 | Five-way button: OSD menu- up ~down- leftright | |
| 8 | FOCUS+(For PTZ control) | |
| 9 | FOCUS-(For PTZ control) | |
| 10 | UTP Cable test input | |
| 11 | DC12V/1A power output | |
| 12 | 5V power input |
| 13 | Rs485 Output | |
|---|---|---|
| 14 | Analog /HD TWCVIAHD signal input | |
| 15 | LED Light | |
| 16 | Audo input | |
| 17 | Output DCSV/1A power output | |
| 18 | Power swich: L ED-ON-OFF |
Operation
Pressing on Calls the OSD menu to set brightness, language, reset, etc. Crick
on to exit
Pressing on and hold the menu button for 5 seconds. toenter UTC mode “UTC” s
displayed at the top of the Screen. Press the menu buton to bring up the
camera menu and operate the UTC menu by up/dow/leftiright/enter. Pressing on
and hold the menu bution for 5 seconds to exit UTC mode.
Pressing on Enter the UTP cable test interface. The test procedure will start
automatically. Pins 1~8 indicates the UTP Cable consistency. Click on & to et
Pressing or enters the PTZ settings page. Set the parameters using the
up/downleftight arrows.
specification
| Model Display | TM-4341N1-84.3 inch TFT- LCD, 800×480 resolution |
|---|---|
| Signal mode | NTSC/PAL (Auto adapt) |
| Video IN | BNC (Analog/AHD/TVI/CVI) signal input |
VIDEO TEST
CVBS Test| YES
AHD TVI CVI Test| 720P/1080P 3MP/4MP/5MP/8MP
UTC OSD control| UTC control/call OSD menu
OTHER TEST
Audio input test| YES
PIZ Controller| Support RS485,Compatible with protocols
PELCO- D/P, Baud Rate 1200— 14400bps
UTP Cable Tester| Enhanced UTP cable, with indicator light, the test distance
can reach 100- 150 meters
POWER|
DC12V output| DC12V1A power Output
Power Adapter| DC 5V/1A Input
Battery| Built-in 3.7V 3000ma battery
Battery Life| 8 hours work after full charge (Without supplying power to
external devices)
111- .:„,
–
Language| 12 Languages available
General
Working Temperature| 10°C-+50°C
Working Humidity| 30% – 90%
Dimension/Weigh| 38mm x 103mm x 41 mm /0.5kg
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>