SONY SA-SW3 Subwoofer Instruction Manual
- June 6, 2024
- Sony
Table of Contents
SONY SA-SW3 Subwoofer Instruction
Owner’s Record
The model and serial numbers are located on the rear of the subwoofer. Record
the serial numbers in the space provided below. Refer to them whenever you
call upon your Sony dealer regarding this product. Model No. SA-SW3 Serial No.
About compatible models for the subwoofer
The SA-SW3 subwoofer works only with the specified model. For information
about compatible models, visit Sony’s website.
In these Operating Instructions, the operations are described for the
subwoofer used with the compatible model HT-A7000 or HT-A9.
Parts and Controls
Front
-
Power indicator
- Flashes slowly (green): The subwoofer is not connected to a compatible model.
- Lights up (green): The subwoofer is connected to a compatible model.
- Flashes twice repeatedly (green): The subwoofer is attempting to connect to a compatible model.
- Flashes/lights up (amber): The software is updating.
- Lights up (red): The subwoofer is in standby mode.
-
Turns off: The subwoofer is turned off.
Note
The brightness of the power indicator syncs with the DIMMER settings of a compatible model.
Rear -
(power) button
-
LINK button
-
AC inlet
Installation
The following illustration is the installation example to use the subwoofer with the compatible model HT-A7000 and optional rear speakers.
- Install the subwoofer in the place that you want.
You can install the subwoofer in the place that you want because the output sound from it has no directivity.
The above illustration is an example of the installation of the subwoofer.
Tip
To obtain a good surround sound, set the subwoofer distance from your listening position by using the setup menu of a compatible model.
For details, refer to the Operating Instructions supplied with a compatible model.
Connection
Tip
You can connect the optional rear speaker with a compatible model in the
following way when installing it too.
- Turn on a compatible model.
- Connect the AC power cord (mains lead) (supplied) to the subwoofer, and then connect the cord to the AC outlets (mains).
Make sure that the power indicator on the subwoofer lights in green.
When the power indicator lights in green, the connection between the subwoofer
and a compatible model is established.
If the connection is not established, connect the subwoofer to a compatible
model manually. For details, see “If the Connection is not Established
Automatically”.
If the Connection is not Established Automatically
If you cannot connect the subwoofer to a compatible model automatically or you
use multiple compatible models and want to specify the compatible model for
connecting the subwoofer, perform the manual connection.
The following operation is described for the subwoofer used with the
compatible model
HT-A7000 or HT-A9. Use the remote control supplied with the compatible model
HT-A7000 or HT-A9 when performing this operation.
If you use other compatible models, refer to the Operating Instructions
supplied with them.
-
Press HOME.
The home menu appears on the TV screen.
-
Select [Setup] – [Advanced Settings] on the home menu.
-
Select [Speaker Settings] – [Wireless Speaker Settings] – [Start manual linking].
The [Start manual linking] screen appears on the TV screen. -
Press LINK on the subwoofer.
The power indicator of the subwoofer that had LINK pressed flashes twice repeatedly in green. -
Select [Start].
The manual link starts.
The connecting process appears on the TV screen. To cancel the manual link, select [Cancel]. -
When [Subwoofer] display [Connected], select [Finish].
-
Press
The link is established and the power indicator of the subwoofer lights in green.
Note- If you perform [Start manual linking], [Link mode] of [Wireless Speaker Settings] is set to [Manual] automatically.
- Only the speakers for which [Connected] has been displayed in Step 6 connect to a compatible model. If the connection of the subwoofer cannot be established, perform the manual connection again.
If Wireless Transmission is Unstable
If you use multiple wireless systems, such as a wireless LAN, the wireless
signals may become unstable. In this case, the transmission may be improved by
changing the following setting.
The following operation is described for the subwoofer used with the
compatible model
HT-A7000 or HT-A9. Use the remote control supplied with the compatible model
HT-A7000 or HT-A9 when performing this operation.
If you use other compatible models, refer to the Operating Instructions
supplied with them.
-
Press HOME.
The home menu appears on the TV screen. -
Select [Setup] – [Advanced Settings] on the home menu.
-
Select [Speaker Settings] – [Wireless Speaker Settings] – [RF Channel].
-
Select the setting you want.
-
[On] (default setting): Normally select this. The system automatically selects the better channel for transmission. Stronger mode for wireless interference.
-
[Off]: The system selects a channel from the limited frequency band to prevent external wireless interference. If sound dropping occurs while [On] is selected, it may be improved by selecting [Off].
Note -
If you change the [RF Channel] setting from [Off] to [On], it may take 1 minute to reconnect.
-
A compatible model may not meet this setting depending on countries/regions where you purchase it.
-
Troubleshooting
If you experience any of the following difficulties while using the subwoofer,
use this troubleshooting guide to help remedy the problem before requesting
repairs. Should any problem persist, consult your nearest Sony dealer.
Be sure to bring all of your subwoofer, a compatible model and optional rear
speakers (not supplied) even if it seems as though only one has a problem,
when you request to repair.
The following solutions are described for the subwoofer used with the
compatible model HT-A7000 or HT-A9. If you use other compatible models, refer
to the Operating Instructions supplied with them. No sound or only a very low-
level sound is heard from the subwoofer.
-
Press SW+ or BASS + on the remote control of a compatible model to increase the subwoofer volume.
-
Make sure that the power indicator on the subwoofer is lit in green.
-
If the power indicator on the subwoofer does not light, try the following.
- Make sure the AC power cord (mains lead) of the subwoofer is connected properly.
- Press (power) of the subwoofer to turn on the power.
-
If the power indicator on the subwoofer flashes slowly in green or lights in red, try the following.
- Move the subwoofer to a location near a compatible model so that the power indicator on the subwoofer lights in green.
- Follow the steps in “If the Connection is not Established Automatically.”
- Check the wireless connection status. For details, refer to the Operating Instructions supplied with a compatible model.
-
If the power indicator on the subwoofer flashes in red, press (power) of the subwoofer to turn off the power and check whether the ventilation holes of the subwoofer is blocked or not.
-
If the input sources contain very little bass sound components (i.e., a TV broadcast), the sound from the subwoofer may be difficult to hear. You can check the subwoofer sound by emitting the test tone.
-
Set the night mode to off. For details, refer to the Operating Instructions supplied with a compatible model.
-
If you change the [RF Channel] setting from [Off] to [On], it may take 1 minute for the sound to be output.
Sound skips or has noise. -
If there is a device nearby that generates electromagnetic waves, such as a wireless LAN or a microwave oven in use, locate the subwoofer and a compatible model apart from it.
-
If there is an obstacle between the subwoofer and a compatible model, move or remove it.
-
Locate the subwoofer and a compatible model as close as possible.
-
Change the [RF Channel] setting.
-
Switch the network connection of the TV or Blu-ray Disc player from wireless to wired.
Specifications
Amplifier section
U.S. models:
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:(FTC)
With 2 ohms loads, from 28 – 200 Hz; rated 130 W, minimum RMS power, with no
more than 1% total harmonic distortion from 250 mW to rated output.
POWER OUTPUT (reference) 200 W (at 2 ohms, 100 Hz)
Canadian models:
POWER OUTPUT (reference)
200 W (at 2 ohms, 100 Hz)
Speaker system
Subwoofer speaker system, Bass reflex
Speaker
160 mm (6 3/8 in) cone type
Power requirements
120 V AC, 60 Hz
Power consumption
On: 40 W
Standby mode: 1 W or less
Turned off: 0.5 W or less
Dimensions (approx.) (w/h/d)
201 mm × 382.5 mm × 402 mm (8 in × 15 1/8 in × 15 7/8 in) (not including the
projection portion)
Mass (approx.)
9.0 kg (19 lb 14 oz)
Wireless transmitter/receiver section
Communication system
Wireless Sound Specification Version 4.0
Frequency band
5 GHz
Modulation method
OFDM
Included items
- Subwoofer (1)
- AC power cord (mains lead) (1)
- Operating Instructions (1)
Important information on software
This product contains software that is subject to the GNU General Public
License (“GPL”) or GNU Lesser General Public License (“LGPL”). These establish
that customers have the right to acquire, modify, and redistribute the source
code of said software in accordance with the terms of the GPL or the LGPL. For
the method to confirm the GPL, LGPL and other software licenses contained in
the subwoofer, please refer to the Operating Instructions of a compatible
model. When you use the compatible model HT-A7000 or HT-A9, please refer to
[Software License Information] under [Setup] – [Advanced Settings] – [System
Settings] on the home menu.
The source code for the software used in this product is subject to the GPL
and LGPL, and is available on the Web. To download, please access the
following: URL:
http://oss.sony.net/Products/Linux
Please note that Sony cannot answer or respond to any inquiries regarding the
content of this source code.
All other trademarks are trademarks of their respective owners.
WARNING
To reduce the risk of fire or electric shock, do not expose this subwoofer to
rain or moisture. The subwoofer is not disconnected from the mains as long as
it is connected to the AC outlet, even if the subwoofer itself has been turned
off. To reduce the risk of fire, do not cover the ventilation opening of the
subwoofer with newspapers, tablecloths, curtains, etc. Do not expose the
subwoofer to naked flame sources (for example, lighted candles).
To reduce the risk of fire or electric shock, do not expose this subwoofer to
dripping or splashing, and do not place objects filled with liquids, such as
vases, on the subwoofer. As the main plug is used to disconnect the subwoofer
from the mains, connect the subwoofer to an easily accessible AC outlet.
Should you notice an abnormality in the subwoofer, disconnect the main plug
from the AC outlet immediately.
Do not install the subwoofer in a confined space, such as a bookcase or built-
in cabinet.
Do not place this product close to medical
devices.
This product (including accessories) has magnet(s) which may interfere with
pacemakers, programmable shunt valves for hydrocephalus treatment, or other
medical devices. Do not place this product close to persons who use such
medical devices. Consult your doctor before using this product if you use any
such medical device.
Indoor use only.
For the customers in the U.S.A.
NOTE:
FCC Statment
This subwoofer has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This subwoofer generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this subwoofer does cause harmful interference to
radio or television reception, which can be determined by turning the
subwoofer off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the subwoofer and receiver.
- Connect the subwoofer into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
If you have any questions about this subwoofer: Visit:
www.sony.com/electronics/support
Contact: Sony Customer Information Service Center at 1-800-222-Sony(7669)
Write: Sony Customer Information Service Center 12451 Gateway Blvd., Fort
Myers, FL 33913
Supplier’s Declaration of Conformity
Trade Name: SONY
Model: SA-SW3
Responsible Party: Sony Electronics Inc.
Address: 16535 Via Esprillo, San Diego, CA 92127
U.S.A.
Telephone Number: 858-942-2230
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION
You are cautioned that any changes or modifications not expressly approved in
this manual could void your authority to operate this subwoofer.
This subwoofer must not be co-located or operated in conjunction with any
other antenna or transmitter.
This subwoofer complies with FCC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines. This subwoofer should be installed and operated keeping the
radiator at least 20cm or more away from person’s body. Compliance with FCC
requirement 15.407(c)
Data transmission is always initiated by software, which is passed down
through the MAC, through the digital and analog baseband, and finally to the
RF chip. Several special packets are initiated by the MAC. These are the only
ways the digital baseband portion will turn on the RF transmitter, which it
then turns off at the end of the packet. Therefore, the transmitter will be on
only while one of the aforementioned packets is being transmitted. In other
words, this device automatically discontinues transmission in case of either
absence of information to transmit or operational failure.
Frequency Tolerance: ±20 ppm or less
For the customers in Canada
This subwoofer contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s).
Operation is subject to the following two conditions:
- This subwoofer may not cause interference; and
- This subwoofer must accept any interference, including interference that may cause undesired operation of the subwoofer.
This subwoofer complies with ISED radiation exposure limits set forth for an
uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF)
Exposure rules. This subwoofer should be installed and operated keeping the
radiator at least 20cm or more away from person’s body.
5.15 – 5.35 GHz band is restricted to indoor operations only.
Data transmission is always initiated by software, which is passed down
through the MAC, through the digital and analog baseband, and finally to the
RF chip. Several special packets are initiated by the MAC. These are the only
ways the digital baseband portion will turn on the RF transmitter, which it
then turns off at the end of the packet. Therefore, the transmitter will be on
only while one of the aforementioned packets is being transmitted. In other
words, this device automatically discontinues transmission in case of either
absence of information to transmit or operational failure.
Precautions On safety
- Should any solid object or liquid fall into the subwoofer, unplug the system and have it checked by qualified personnel before operating it any further.
- Do not climb on the subwoofer, as you may fall down and injure yourself, or the subwoofer damage may result.
On power sources
- Before operating the subwoofer, check that the operating voltage is identical to your local power supply. The operating voltage is indicated on the nameplate at the rear of the subwoofer.
- If you are not going to use the subwoofer for a long time, be sure to disconnect the subwoofer from the wall outlet (mains). To disconnect the AC power cord (mains lead), grasp the plug itself; never pull the cord.
- One blade of the plug is wider than the other for the purpose of safety and will fit into the wall outlet (mains) only one way. If you are unable to insert the plug fully into the outlet, contact your dealer.
- AC power cord (mains lead) must be changed only at a qualified service shop.
On heat buildup
- Although the subwoofer heats up during operation, this is not a malfunction. If you continuously use this subwoofer at high volume, the subwoofer temperature at the rear and bottom rises considerably. To avoid burning yourself, do not touch the subwoofer.
On placement
- Do not place the subwoofer near heat sources or in a place subject to direct sunlight, excessive dust, or mechanical shock.
- Do not place metal objects other than a TV around the subwoofer. Wireless functions may be unstable.
- If the subwoofer is being used in combination with a TV, VCR, or tape deck, noise may result and picture quality may suffer. In such a case, place the subwoofer away from the TV, VCR, or tape deck.
- Use caution when placing the subwoofer on a surface that has been specially treated (with wax, oil, polish, etc.), as staining or discoloration of the surface may result.
- The speakers of this subwoofer are not of magnetically shielded type. Do not place magnetic cards on the subwoofer or near it.
If you encounter color irregularity on a nearby TV screen
Color irregularities may be observed on certain types of TV sets.
On cleaning
Clean the subwoofer with a soft, dry cloth. Do not use any type of abrasive
pad, scouring powder, or solvents such as alcohol or benzine.
If you have any questions or problems concerning your system, please consult
your nearest Sony dealer.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>