WELLFOR KOLE-W10MRL2836 LED Bathroom Mirror with Lights Instruction Manual

: June 1, 2024
: WELLFOR

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS
TOOLS REQUIRED FOR ASSEMBLY
PARTS INCLUDED
HARDWARE INCLUDED
ELECTRIC CONNECTIONS
INSTALLATION INSTRUCTIONS
TOUCH SWITCH SETTING UP
Use and Maintenance
LIMITED WARRANTY
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

WELLFOR KOLE-W10MRL2836 LED Bathroom Mirror with Lights

WELLFOR KOLE-W10MRL2836 LED Bathroom Mirror with
Lights

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical furnishing, basic precautions should always be followed,Requires two(2) person in installation.

DANGER READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS MIRROR.
WARNING To reduce the risk of burns, fire, electric shock or injury to persons. Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer. Never drop or insert any object into any opening. Do not use outdoors.
WARNING Risk of electric shock. Connect this furnishing to a properly grounded circuit only. See Grounding instructions.

GROUNDING INSTRUCTIONS:

WARNING This product must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the product.
An Electrical option cabinet must be wired to a 20 Amp GFI (Ground Fault Interrupter) protected circuit when used in bathrooms and all other locations required by the National Electric Code.

NOTE: To ensure the normal use of product, it is required to set out wires as per the regulations of IEE. The product is only applicate to the indoor installation. The installation must be executed by a professional electrician, wrong installation may lead to product damage and personal injury.

TOOLS REQUIRED FOR ASSEMBLY

Electrical Drill
1/8″ Drill Bit
Pencil
Phillips Screwdriver
Tape Measure
Level

PARTS INCLUDED

Mirror
Parts Included

HARDWARE INCLUDED

(not shown actual size)

SCREW
WALL PLUG
WIRE CONNECTOR
HANGING BAR

NOTE: Determine overall mirror dimensions before proceeding to installation.
AII dimensions ＆ specifications are approximate and subject to change without notice.
Accessories and parts may vary from the picture above.Depends on the product model and size.

ELECTRIC CONNECTIONS

ALL WIRING SHOULD BE DONE BY A QUALIFIED LICENCED ELECTRICIAN

WARNING: Shut off power before wiring the mirror.
WARNING: An Electrical option mirror must be wired to a 20 Amp GFI (Ground Fault Interrupter) protected circuit when used in bathrooms and all other locations required by the National Electric Code.
WARNING: This mirror must be connected to a grounded, metal permanent wiring system or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lead on the mirror.
CAUTION: Requires 120 VAC 20 Amp GFI protected circuit.

Consist:

Defogger Pad
Electric Box
Velcro

*Note: Attach the mirror to the wall with Velcro on its back to prevent it from sliding when pulled.

Wire terminal plate is not included.
Strip wires to a suitable length size.
*DO NOT connect to a plug & socket outlet.
Electric Connections

MIRROR FEATURES

5mm copper free silver mirror
High quality LED Lighting
CRI 90+, 3000-6000K CCT, IP44
Color temperature and dimming
Separate controlled defogger
Vertical and horizontal mount options

INSTALLATION INSTRUCTIONS

PLACEMENT
Select the desired position of the mirror.
Level and mark the location.
(vertical and horizontal mounting options)
SUPPORT LOCATION
Measure the hanging bar holes and mark the drilling locations ensure marking are leveled.
INSTALL SCREWS
Using a drill, make holes on solid wall,and fill with supplied plugs and screws into hanging bar holes tightly.
POWER OFF
Please turn off all the power before the mirror wires connection.
CONNECTION
Plug into the socket ,or cut off the plug then use the wire connector to connect the external power supply.
(plug or hardwire connection options)

Warning: Strip wires to a suitable length.DO NOT connect the hardwire to a plug & socket outlet.
Turn on the power
Hang up the mirror stable then turn on the power.

Note: DO NOT use plug outlet behind the mirror, The back of mirror is FLAT, there is no space gap between wall and mirror frame. For some big sizes of mirror, we do not provide the plug.

TOUCH SWITCH SETTING UP

How to use Touch Switch:

Touch Switch Setting Up

Left Touch Sensor
Light brightness 10%-100% control by holding. S
hort touch to ON/OFF lighting.
Release the button when the light reaches the desired brightness.

Middle Touch Sensor
Short touch to get the light temperature 60001<, 4500K and 3000K.
Long touch to adjust the light temperature from 6000K-3000K.
Release the button when the light reaches the desired color.

Right Touch Sensor
Short touch to turn ON/OFF the defogger.

The mirror is equipped with memory function to preserve the previous brightness/color settings.
*Suggestion: The mirror is equipped with memory function to preserve the previous brightness/color settings.

WARNINGS:

Please do not use if you found the mirror have been broken.
Never put any sharp or heavy material on the mirror surface, other wise the glass mirror will be broken and body injury accidents may occur.
Turn off the power switch in storm lightning weather to avoid electric parts damage.

Use and Maintenance

CAUTION:

USE
To avoid damage, do NOT knock the mirror with any hard objects;
CLEANING
Do NOT clean the mirror with caustic cleaner. Do NOT wipe the mirror with Bristle brush;
MAINTENANCE
For daily maintenance, please use soft cloth and mild cleaner to clean the mirror.

LIMITED WARRANTY

LIMITED WARRANTY TWO YEARS TERM:

WELLFOR warrants to the original purchaser that, it will, at its election repair,replace, or make appropriate adjustment to products made by this company shown to have significant defects in material or workmanship which are reported to WELLFOR in writing within two (2)years from the date of delivery.WELLFOR is not responsible for installation costs. The warranty is void in the event the product is damaged in transit, or if damage or failure is caused by abuse, misuse, abnormal usage, faulty installation, damage in an accident,improper maintenance,or any repairs other than those authorized by WELLFOR.At the expiration of the two years warranty period,WELLFOR shall be under no further obligation under any warranty, expressed or implied,including the implied warranty of merchantability. WELLFOR shall not be liable for any consequential damages arising out of or in connection with the use or performance of its products. Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.Any liability against WELLFOR under any implied warranty, including the warranty of merchantability, is expressly limited to the terms of this warranty. Permission to return any merchandise under this warranty must be authorized by WELLFOR and returned prepaid by the purchaser. Claims under this warranty should be sent directly to your dealer.