ZEBRONICS ZEB-JUKE BAR 3650 Pro Soundbar User Manual

ZEBRONICS ZEB-JUKE BAR 3650 Pro Soundbar

Important Safety Instruction

Thank you for purchasing the ZEB-JUKE BAR 3650 PRO Soundbar. Please read this user manual carefully and keep for future reference.

Warning

**| CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN| **
---|---|---
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER (OR BACK)

Caution

• To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No user-serviceable parts inside.
• Refer servicing to qualified personnel only.

**The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute an electric shock to a person or persons.
Important:** This symbol alerts you to read and observe important warnings and instructions on the unit or in this manual.

Notice

This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

1. To prevent possible hearing damage, do not listen at high volume levels for long time periods or at a sudden high volume level.
2. Never use the device unsupervised! Switch off the device whenever you are not using it, even if not using it only for a short while.
3. The appliance is not intended to be operated by means of an external timer or a separate remote control system.
4. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
5. Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
6. The unit should not be impeded by covering the ventilation opening with items such as newspapers, tablecloths, curtains, etc. Make sure that there is at least 20 cm of space above and at least 5 cm of space on each side of the unit.
7. The apparatus must not be exposed to dripping or splashing liquid, and no objects filled with liquids such as vases should be placed on the apparatus.
8. To prevent fire or shock hazards, do not expose this equipment to direct heat, rain, moisture, or dust.
9. Do not position this unit near any water sources e.g. taps, bathtubs, washing machines, or swimming pools. Ensure that you place the unit on a dry, stable surface.
10. Do not place this unit close to a strong magnetic field.
11. Do not place the unit on an amplifier or receiver.
12. Do not place this unit in a damp area as the moisture will affect the life of electric components.
13. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry, or slightly damp cloth.
14. When removing the power plug from the wall outlet, always pull directly on the plug, never pull on the cord.
15. Depending on the electromagnetic waves used by a television broadcast, if a TV is turned on near this unit while it is also on, lines might appear on the LED TV. Neither this unit nor the TV is malfunctioning. If you see such lines, keep this unit well away from the TV set.
16. The mains plug is used to disconnect the device, the disconnected device should remain readily operable.

Important Safety Instructions

1. Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings.
2. Do not use this apparatus near water.
3. Clean only with dry cloth.
4. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
5. Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus (including amplifiers) that produce heat.
6. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, or at the point where they exit from the apparatus.
7. Only use attachments/accessories specified by the manufacturer.
8. Unplug this apparatus during lightning storms or when unused for long periods of time.
9. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, for example, when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
10. The AC plug is used to disconnect the device, the disconnected device should remain readily operable. In order to disconnect the apparatus from the AC power completely, the AC plug must be removed from the AC outlet completely.

Important Notes

• This sound bar was specially developed for LED/LCD/Plasma TV’s: It should not be used in combination with CRT TV’s (Cathode Ray
• Tube TVs) in order to avoid image interference. Safety and operating instruction manual should be retained for future reference.
• The apparatus should not be exposed to dripping, splashing or placed in a humid atmosphere such as a bathroom.
• Do not install the product in the following areas:
  • Places exposed to direct sunlight or close to radiators.
  • On top of other stereo equipment that radiate too much heat-Blocking ventilation or in a dusty area.
  • Areas where there is constant vibration. Humid or moist places.
  • Do not place near candles or other flames.
• Operate the product only as instructed in this manual.
• Before turning on the power for the first time, make sure the sound bar is plugged to power outlet.
• For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel.
• Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside. Refer all servicing to qualified service personnel.

Preparation for Use

Unpacking and Set Up

• Remove the Soundbar from the carton and remove all packing material from the Sound bar. Save the packing material, if possible, in case the Sound bar ever needs to be serviced or transported. The original carton and packing material is the only safe way to pack your Sound bar to protect it from damage in transit.
• Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove any labels or stickers from the back or bottom of the cabinet.
• Place your Soundbar on a level surface such as a table, desk or shelf, convenient to an AC outlet, out of direct sunlight, and away from sources of excess heat, dirt, dust, moisture, humidity, or vibration.
• Unwind the Line cord connecting the ACc adapter and extend it to its full length.

Protect Your Furniture

This model is equipped with non-skid rubber feet’ to prevent the product from moving when you operate the controls. These ‘feet’ are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber ‘feet’ to soften, and leave marks or a rubber residue on the furniture. To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement centers everywhere, and apply these pads to the bottom of the rubber ‘feet’ before you place the unit.

Power Source

This sound bar is designed to operate on normal AC Power source in 220-240V 50/60Hz. Do not attempt to operate the Sound bar on any other power source. You could cause damage to the Soundbar that is not covered by your warranty.

Product Representation

Sound Bar

1. LED DISPLAY
2. USB
3. AUX
4. OPTICAL IN
5. HDMI(ARC)
6. AC IN
7. Power/Standby
8. INPUT
9. VOL _
10. VOL+

Remote Control

1. ****Standby mode for power on/off.
2. Pair: Connect or Disconnect to the Pairing Device. (Press the Button for more than 2 Seconds)
3. VOL+: Master Volume Up.
4.  Previous Track (Only work under USB & BT Mode).
5. VOL-: Master Volume Down.
6. MUSIC: Select the Music EQ effect.
7. TREB+: Treble Volume Up.
8. TREB-: Treble Volume Down.
9. MUTE: Mute Mode.
10. INPUT: Input mode(AUX/USB/HDMI(ARC)/COA/BT)
11.  Next Track (Only work under USB & BT mode).
12. RESET Play/Pause: Play / Pause for Current Track (Only work under USB and BT mode). Reset: Press and hold the button for more than 2 sec. to Set all functions to manufacturer defaults.
13. MOVIE: Select the Movie EQ effect.
14. NEWS: Select the News EQ effect.
15. BASS+: Bass Increase.
16. BASS-: Bass Decrease.
17. 3D: Select the 3D EQ effect.

Positioning the Sound Bar

Place on a flat Surface

Place the soundbar horizontally on a flat surface such as a TV unit or shelves and align it centrally with the TV screen. Allow some space between the speaker and the wall. Don’t place it inside a cabinet or a walled shelf. Follow this guide for the best sound output and good airflow around the soundbar.

Mount on the wall

WARNING:  If you don’t feel confident to correctly and securely wall- mount the sound bar, Seek the assistance of an experienced person of professional. Install the speaker on a vertical, fast, reinforced area of the wall. For plaster walls, it is recommended to screw into wall studs for greater security. For optimum performance, allow at least a 2Smm/1″distance between the sound bar and the TV.

Follow the below steps to mount the sound bar on the wall

1. Open 4 holes in the wall referring to iron bracket for wall mounting, the spacing distance of the holes in the wall is corresponding to the symmetrical position on  sound bar (When measuring the position ofwall mounting, avoid the sound bar pads to put on the iron bracket, because pad is not flat, will not be sticky well on the double-side tape on the bracket.)
2. Fix the plastic anchor in the 4 holes of the wall mounting bracket.
3. Then fix the supplied screws on the plastic anchor and tighten the screws to ensure that the wall mounting bracket will not shake.
4. After fastening the screws, tear off one side of the two double-sided tapes in the supplied packaging, and paste them on the right and left into the extension of the wall brackets according to the suitable position where the Sound Bar on the iron bracket. (Not foot position of the sound bar)
5. Then tear off the other side of the double- sided tape attached to the iron bracket, place the Sound Bar on the double-sided tape on the metal fittings, press it firmly and release it until it is completely stuck.

OPERATE INSTRUCTIONS

Setting the Soundbar

1. Plug in the external adapter and the display will light up (Standby mode)
2. Switch on the soundbar by using the power button on the soundbar of by using the STANDBY button on the remote. After switching on, the default input mode will appear on display.
3. Input mode can be changed by pressing the power button again or by using the INPUT button on remote.
4. Below are input mode names appearing in the soundbar display:
5. BT: BT Pairing Mode
6. Au: AUX Mode
7. HD: HDMI (ARC) Mode
8. CO: Coaxial Mode
9. US: USB Mode

Powering On/Off

1. Plug the sound bar adapter into a wall outlet, it will automatically enter standby mode.
2. Short-press the multi-function button to turn on the soundbar.
3. To turn it off, press the STANDBY button on the remote control or unplug it from the wall outlet.
   

Playing Audio via BT Connection

1. Turn on the sound bar and then short-press the multi-function button to switch to BT mode and the LED will show 8T

2. Activate the pairing function on your phone or other compatible devices and select
   “ZEB-JUKE BAR 3650 PRO”.

3. When successfully paired, you will hear a tone and the LED Display will stay on.

4. The remote control includes BT mode playback controls.

Notes:

• If your pairing device is switched off or manually disconnected, the soundbar will automatically enter pairing mode.
• If the connected device is switched off or manually disconnected, the soundbar will automatically enter pairing successfully connected device will be re-established once you re-enter the wireless range (10 meters). To connect to other devices, repeat the above pairing steps.
• There is no automatic shutdown in pairing mode. The sound bar will remain in pairing mode even if no device is paired, so switch off if not in use.

Playing Audio via USB Port

The sound bar automatically switches to USB input mode with the LED display US when a USB flash drive is inserted (this mode isn’t selectable on the sound bar or remote control unless a USB flash drive is connected).

1. Ensure that your USB flash drive contains MP3 audio files (other file types not supported).
2. Connect the USB flash drive to the USB port on the sound bar (or your own USB extension cable connected to the USB port); music will automatically play.
3. The remote control includes USB input mode playback controls.

Using the Soundbar

Audio input(Aux)Connection

1. Connect the sound bar to your PC, tablet, smartphone, TV, or other device using the included audio cable short-press the multi-function button to switch to audio input mode with the LED Display lit up (Ru)
2. In this mode, playback can only be controlled on your connected device

Note:  For some computers, you may need to access the audio control! panel to manually set the sound bar as below picture.

HDMI (ARC) Mode

1. The Soundbar supports HDMI with Audio Return Channel(ARC). If your TV is HDMI ARC compliant, you can hear the TV audio through your Soundbar by using a single HDMI cable
2. Using a High-Speed HDMI cable, connect the HDMI (ARC) connector on the soundbar to the HDMI ARC connector on the TV. The HDMI ARC connector on the TV might be labeled differently. For details, see the TV user manual.
3. Press the Input button in soundbar or on remote control to select HDMI (ARC) mode.
4. You can use the volume buttons to adjust the volume your requirement.

Optical Mode

Use this operating mode to play music from the optical digital input for example from a TV on your soundbar (A). The TV must have an optical digital output. Use the optical cable to make the connection. Proceed as follows

1. Connect the optical cable to the optical digital output of your TV.
2. Then connect the optical cable to the optical digital input of your soundbar.
3. Switch the TV set and sound bar on. Set the connected TV to “PCM Stereo” or “Stereo 2.0”.
4. Start playing on the TV.
5. Press the INPUT button on the soundbar or on the remote control to select OPTICAL mode.
6. You can use the volume buttons to adjust the volume to your requirements.

Features

• Multi Connectivity (BT v5.0 / HDMI (ARC)/Optical IN/USB/AUx)
• Built-in Dual Subwoofer
• Remote control
• Wall Mountable
• LED Display
• Volume/Media Control
• Premium Glossy Finish

Specifications

• Output Power (RMS): 100W (20Wx2 +30Wx2)
• Subwoofer: 7.62cmx2
• Satellites: (5.2 x7.5cm) x 2
• Impedance
  • Subwoofer: 8
  • Satellites: 8
• Frequency response: 70Hz-20kHz
• S/N Ratio: 66dB
• Separation: 40dB
• File format support: Line input
• MP3 (USB): 3.5mm, Optical IN& HDMI (ARC)
• Max supported
  • memory size (USB): 32GB
  • BT name: ZEB-JUKE BAR 3650 PRO
  • BT version: 5.0
• Product Dimension (WxDxH):  900x 115×80 mm
• Net. Weight: 3.5K8

Troubleshooting

ISO 9001:2015 Certified Company www.zebronics.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>