Majorcom SPOT-2010T-EN5424 20W Sound Projector User Guide
- June 1, 2024
- MAJORCOM
Table of Contents
Majorcom SPOT-2010T-EN5424 20W Sound Projector
Product Information
Product Specifications:
- Model: SPOT-2010T-EN5424
- Nominal Power: 20W
- Power: 100V Line
- Frequency Range: Not specified
- Impedance: Not specified
- Sensitivity (1W/1m): Not specified
- SPL Max 1m: Not specified
- Directivity (-6dB): Not specified
- Speaker Dimensions: Not specified
- Fixed Centre Distance: Not specified
- Weight: Not specified
- Material: ABS + Aluminum grid
- Protection Rating: IP55
- Colour: White
- Connection: Block terminals
Product Usage Instructions
Installation:
- Choose a suitable location for mounting the sound projector.
- Ensure the mounting surface can support the weight of the speaker.
- Connect the speaker to the appropriate power source using the provided block terminals.
- Adjust the direction of the speaker to achieve optimal sound projection.
Operation:
- Power on the speaker using the connected power source.
- If using a voice alarm system, follow the system’s specific instructions for integration.
- Test the speaker to ensure it is functioning correctly and producing sound at the desired volume.
Maintenance:
Regularly check for any dust or debris accumulation on the speaker surface and
clean as needed. Ensure all connections are secure to prevent any audio
disruptions.
Frequently Asked Questions
Q: What is the IP55 protection rating?
A: The IP55 rating indicates that the speaker is protected against dust ingress and low-pressure water jets from any direction, making it suitable for indoor and outdoor use.
Q: How do I adjust the direction of the speaker for optimal sound projection?
A: You can physically adjust the position of the speaker to change its direction. Experiment with different angles to find the best sound coverage area.
Q: Can I paint the speaker to match my decor?
A: It is not recommended to paint the speaker as it may affect its performance and durability. It is best to keep it in its original colour.
KEY POINTS
- High intelligibility
- Protection index IP 55
- Inconspicuous & multipurpose
- Easy and quick installation
- EN54-24 certified
- The SPOT-2010T-EN5424 is a 20W sound projector fitted with a dual cone loudspeaker.
- Its fixing device facilitates its orientation and ensures an easy and quick installation: wall- or ceiling mounting.
- Made out of ABS, it is weatherproof, shock and corrosion-resistant. Therefore, it can be installed in any type of environment
Dimension
Specification
Model | SPOT-2010T-EN5424 |
---|---|
Nominal power | 20 W |
Power 100V Line | 20 / 10 / 5 W |
Frequency range | 110 – 17 000 Hz |
Impedance | 20 W : 0.5 kΩ / 10 W : 1 kΩ / 5 W : 1.8 kΩ |
Sensitivity (1W/1m) | 100 dB |
SPL Max 1m | 112 dB/20W |
Directivity (-6dB) | 500 Hz: 180° |
4 KHz: 75°
Speaker| Ø 12,5 cm dual cone
Dimensions| Ø 138 x 205 mm
Fixed centre distance| 2 x 60 mm
Weight| 1.6 kg
Material| ABS + Alu grid
Protection rating| IP55
Colour| White
Connexion| Block terminals
Contact Information
- www.majorcom.fr
- commercial@majorcom.fr.
- +33 [0]5 61 31 86 87
Specifications are subject to change without notice. 02/2024
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>