GADFISH B0CHW2K7QJ Braiding Hair Rack User Guide
- August 5, 2024
- GADFISH
Table of Contents
GADFISH B0CHW2K7QJ Braiding Hair Rack
What’s inside the package
Height Adjustable Stand: The height can be adjusted from 118cm to 139cm.
Installation Steps
STEP1, Open the bottom tripod slightly with your hand, then grab the tripod and push forward.
STEP2, place the open bracket on a flat surface and balance the three support rods.
STEP3, Take out the telescopic rod, stretch the upper part of the rod to the desired position, and then twist the rotary device to secure.
STEP4, Insert the bottom of the telescopic rod into the hole on the top of the triangular support frame and rotate and fix it.
STEP5, Take out the top half and bottom half of the braid bracket, align their edges and slip them together.
STEP6, Use tools to tighten the screws.
STEP7, Take out the braid frame, insert the hole in the middle of the bottom of the braid frame to the top of the telescopic rod and
STEP8, Take out the shelf, place it in the desired position, tighten the screws at the back to fix it, and then take out four small hooks to hang in the position shown.
STEP9, After the braid rack is installed, the hair can be placed in the desired position to start the braid, or the comb and bobby pin accessories can be placed in the shelf.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>