ZEBRONICS JUMBO Wireless Neckband Earphone User Manual
- June 3, 2024
- ZEBRONICS
Table of Contents
STINGER 3.3T GT Downpipe Instruction Manual
Thank You for purchasing JUMBO Wireless neckband earphone. Please read
this user manual carefully before operation & save it for future reference.
Note:
- Please full charge the product with a power adapter output rated DC SV before first time usage.
- Do not self-disassemble the product or it will result in the failure of warranty.
- Make sure not to use this product at anyhigh-temperature or high humidity environment.
Caution : Listening at high volume can cause hearing impairment. Please limit your usage time at high volume.
Features
Wireless BT earphone with Neckband Volume/Media Control Magnetic Earpiece Environmental Noise Cancellation (ENC) Call Function Dual pairing Voice Assistant support Type C Charging 160h* Playback 1 000mAh built-in rechargeable battery Gaming mode (Low latency)
Specifications
BT Version : 5.2
Supported BT Profile : HSP / SPP / A2DP /AVRCP
Drive size : 10mm
Speaker impedance : 160
Playback time : 160h
Charging time : 2.Sh
Talk time : 100h
Standby time : 1000h
Net. weight : 54g
Package contents
Neckband : 1 U
Eartips : 4U
Charging cable : 1 U
QR Code Guide : 1 U
Usage Instruction
Bluetooth Pairing Instructions
STEP 1
-Press and hold the MFB to power ON the earphones and to take them into pairing mode with Red & Blue LED blinking alternatively.
STEP 2 –
Switch ON the Bluetooth in your mobile phone & search for the BT name
“JUMBO”
STEP 3 –
Once the BT name is visible in your mobile phone, tap to connect it.
**Product Representation
**
Button Usage
MFB Single Press : Play/Pause the music
MFB Double Press : Gaming mode
MFB Press & Hold : Wake up Voice assistant
Short Press +/- : Volume Up and Down
Long Press +/- : Next I Previous
Activating Smart Phone’s Voice Assistant
When the neckband is connected to a mobile phone, Press and hold the MFB for 3
seconds to activate voice assistant.
Note:
Smart phone should have an active internet connection to use the voice
assistant function.
Call Function
- Short press the MFB to attend or end the incoming call.
- Press and Hold the MFB for 2 seconds to reject the incoming call.
Charging Instruction
Connect the Type-C charging cable to the charging port of the earphones & connect the other end to the DC SV adapter.
LED Indication
Charging indication : Red LED glows
Full charge indication : LED turns Off
BT Discover mode : Red & Blue LED blinks rapidlytill it gets
paired
ISO 9001:2015 Certified Company
www.zeb r onics.com