Lenovo Q41G78S3608B02 Think Centre Tiny In One 22 Gen 5 Touch Instructions
- June 1, 2024
- Lenovo
Table of Contents
Q41G78S3608B02 Think Centre Tiny In One 22 Gen 5 Touch
The drivers and files for this monitor can be downloaded from https://pcsupport.lenovo.com/solutions/tio22gen5touch or scan QR code
https://pcsupport.lenovo.com/solutions/tio22gen5touch
TIO22Gen5 Touch supports Lenovo Accessories and Display Manager-ThinkColour.
Formerly Lenovo Display Control Center
https://pcsupport.lenovo.com/solutions/tio22gen5touch
The drivers and files for this monitor can be downloaded from https://pcsupport.lenovo.com/solutions/tio22gen5touch or scan QR code.
Safety information
DANGER
To avoid shock hazard:
- Do not remove the covers.
- Do not operate this product unless the stand is attached.
- Do not connect or disconnect this product during an electrical storm.
- The power cord plug must be connected to a properly wired and grounded power outlet.
- Any equipment to which this product will be attached must also be connected to properly wired and grounded power outlets.
- To isolate the monitor from the electrical supply, you must remove the plug from the power outlet. The power outlet should be easily accessible.
Handling:
- If your monitor weighs more than 18 kg (39.68 lb), it is recommended that it be moved or lifted by two people.
Troubleshooting information
If you have a problem setting up or using your monitor, you might be able to
solve it yourself. Before calling your dealer or Lenovo, try the suggested
actions that are appropriate to your problem.
Table 2-1. Troubleshooting
| Problem | Possible cause | Suggested action |
|---|---|---|
| The power indicator is not lit and there is no image. | • The monitor’s power |
switch is not switched on.
• The power cord is loose or disconnected.
• There is no power at the outlet.| • Be sure the power cord is connected
properly.
• Be sure the outlet has power.
• Power on the monitor.
• Try using another power cord.
• Try using another electrical outlet.
The power indicator is white,but there is no image.| The video signal cable is
loose or disconnected from the system or monitor.| Be sure the video signal is
connected with the system
properly.
The monitor brightness and contrast levels are at the
lowest setting.| Adjust the brightness and contrast setting on the OSD
(On Screen Display) menu.
The image quality is unacceptable.| The video signal cable is not connected
with the monitor or system completely.| Be sure the signal cable is firmly
plugged into the system
and monitor.
The color settings may be incorrect.| Select another color setting from the
OSD menu.
The automatic image setup function was not performed.| Perform automatic image
setup.
There is a screen message that reads “Out of range” or “HZ?”.
There is no image and the power on indicator is flashing white.| The system is
set to a display mode which is not supported by this monitor.| • If you are
replacing an old monitor, reconnect it and
adjust the display mode to within the specified range for your new monitor.
• If using a Windows system, restart the system in safe
mode, then select a supported display mode for your monitor.
• If these options do not work, contact the Support Center.
For additional troubleshooting information, please refer to the User’s Guide.
Lenovo Limited Warranty-Customer Notice
Lenovo Limited Warranty-Customer Notice
Please read the Lenovo Limited Warranty (LLW) which is available in 30
languages. You can visit http://www.Lenovo.com/warranty to read it.
If you cannot access the LLW this way, contact your local Lenovo office or
dealer to obtain a printed version.
Warranty Information applicable to your Machine:
- Warranty Period: 3 years
- Type of Warranty Service: Customer Replaceable Unit (“CRU”) and Customer Carry-In or Mail-In Service
- Lenovo Limited Warranty Version: L505-0010-02 08/2011
For warranty service consult the telephone list at www.Lenovo.com/support/phone. Phone numbers are subject to change without notice.
Important Battery Recycling and WEEE information
Don’t dispose of your product or battery with your household waste.
Refer to the Compliance Guide that came with your product for further
information. or go to https://www.lenovo.com/recycling
This device complies with part 15 of the FCC Rules. Operation i s subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Bangladesh RoHS Statement
This product shipping to Bangladesh comply with RoHS requirements as
prescribed in the Hazardous Waste (E-waste)
Management Rules, 2021 by Government of Bangladesh.
Bangladesh E-waste Management Reminder
Please manage, dismantle, dispose of, or recycle e-waste properly as per the
Environmental Protection Rules ,1997 to avoid the harm that may be caused to
the environment and ecosystem, public interest and public health.