POWER SMITH PTLH54S-60M Linkable LED String Lights User Manual
- June 5, 2024
- POWER SMITH
Table of Contents
POWER SMITH PTLH54S-60M Linkable LED String Lights
PRODUCT OVERVIEW
- LED Light
- Power Plug
- Receptacle
- Hanging Slot
- Carabiner
- Magnet
UNPACKING CONTENTS
Important! Due to modern mass production techniques, it is unlikely the product is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.
CONTENTS IN PACKAGE
Description Quantity
- String Light 1
- Carabiners 5
- Magnets 5
- Manual 1
SPECIFICATIONS
- Rated Power 120 V~, 60Hz, 60W
- Brightness 7500 Lumens
- Color Temperature 5000K Bright White
- CRI >80
- Beam Angle 210°
- Linkable Up to 7 Sets
- Cord 50 ft. 18/2 SJTW
- Rating IP65 Weatherproof
- Net Weight 5 lb
IMPORTANT SAFETY INSTRUCTION
READ AND UNDERSTAND ALL WARNINGS, CAUTIONS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.
WARNING: RISK OF ELECTRIC SHOCK, Do not use with an extension cord near water or where water may accumulate. Keep work light at least 16 feet from pools and spas. Keep plugs and receptacles dry. Use only three-wire outdoor extension cords with grounded plugs and grounded receptacles.
- Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) to be used for this light in wet locations. Receptacles are available having the built-in GFCI protection and are able to be used for this measure of safety.
- Use only with an extension cord for outdoor use, such as an extension cord of cord type: SW, SW-A, SOW, SOW-A, STW, STW-A, STOW, STOW-A, SJW, SJW-A, SJOW, SJOW-A, SJTW, SJTW-A, or SJTOW, SJTOW-A.
- Do not look directly at the lighted lamps to avoid eye injuries.
- Always keep the work light away from any flammable surface or materials.
- Always check damaged or worn-out parts before using the work light. Broken parts will affect the work light operation. Replace or repair damaged or worn parts immediately. If repairs are needed, consult a professional electrician.
- Do not use a pressure washer to clean this product.
- Do not modify the work light in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the product. There are specific applications for which the work light was designed.
- Store work light in a secure place out of the reach of children. Inspect it for good working condition prior to storage and before re-use.
OPERATIONS
CAUTION
- Keep the metal parts of light away from any live power source.
- Prior to installation and maintenance of the light, disconnect the light from power source to prevent electric shock.
- Installing and operating the light in harsh environments may shorten the lifespan and/or damage the light.
- Keep the light away from any corrosive substance and only clean with dry cloth and non-abrasive cleaner.
- To ensure personal safety, make sure the light is mounted firmly and securely when installed in a high position.
LINKING LIGHTS
Each light set has a receptacle on the end to connect additional sets of
lights off the light.
CAUTION: Only connect a maximum of 7 light sets. The receptacle is only meant to connect to other light sets, do not connect power tools or other high amp draw products.
TURNING ON/OFF THE LIGHT
The light has no switch. Plug into a power outlet to turn on, unplug to turn
off.
MOUNTING THE LIGHTS
CAUTION: Check to make sure there are no signs of physical damage to the product when unpacking. Do not use damaged product. Before plugging in light, use the metal snap hooks or magnets on the top of each light head to hang from a secure location.
MAINTENANCE
WARNING: Always make sure the work light is unplugged and completely cool
before attempting to clean it. Your string light requires very little care and
maintenance. Simply clean the lens regularly with a non-abrasive cleaner.
FUSE REPLACEMENT (FIG 3)
The light string is protected by an 8 Amp fuse, located inside the plug. If
the the lights do not operate when plugged in, unplug from outlet, slide open
the plug cover to determine if the fuse is blown. If the fuse has blown,
replace with a comparable fuse. Slide the plug cover back into place.
WARRANTY
This product is warranted free from defects in material and workmanship for 5 (Five) years after date of purchase. This limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is covered by this warranty and it is not transferable. Prior to returning your product to store location of purchase, please call the Toll- Free Help Line for possible solutions.
HELP LINE
For questions about this or any other PowerSmith™ product,
Please call Toll-Free:
888-552-8665.
Or visit our website:
www.powersmithproducts.com
Richpower Industries, Inc. 736 Hampton Road Williamston, SC USA www.richpowerinc.com
References
- Powersmith Products - Features, Performance, and Versatility
- Richpower Industries, Inc. - Products for Jobsite, Home, and Industry
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>