POWER SMITH PWLR010CM 1000 Lumen Rechargeable LED Clamp Light Owner’s Manual

: September 28, 2024
: POWER SMITH

Table of Contents

POWER SMITH PWLR010CM 1000 Lumen Rechargeable LED Clamp Light
Product Usage Instructions
PRODUCT OVERVIEW
IMPORTANT SAFETY INSTRUCTIONS
OPERATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

POWER SMITH PWLR010CM 1000 Lumen Rechargeable LED Clamp Light

Specifications

Model: PWLR010CM
Brightness: 1000/500/250 Lumens
Color Temperature: 5000K Bright White
Runtime: 2/4/8 Hours
Battery: Lithium-Ion 3.7V, 4.0Ah
USB Output: 5V, 2A
Recharge Time: 2-3 Hours
Net Weight: 1.0 lb

Product Overview

Refer to FIG 1 for the following components:

LED Light Panel
Clamp Base
Clear Cover
Switch Button
Charging Port
Battery Power Indicator
USB Power Output
Ball Joint
Magnets
Hanging Hook
Keyhole Slot
Charging Cable

Product Usage Instructions

Unpacking Contents
Contents in Package:

Clamp Light – 1
USB Charging Cable – 1
Manual – 1

Important Safety Instructions
Read and understand all warnings, cautions, and operating instructions before using this equipment.

Charging the Light

Make sure the light is turned off.
Lift the clear cover to access the charging port.
Connect the USB-C end of the charging cable to the charging port and the USB end to a standard 5V USB power output.
The battery power indicator lights will illuminate blue to display the battery power level.
All four indicator lights will be solid blue when charging is complete.

Maintenance
Warning: Always make sure the light is unplugged and completely cool before attempting to clean it. Clean the lens regularly with a non-abrasive cleaner.

Warranty
This product is warranted free from defects in material and workmanship for 2 years after the date of purchase. The warranty does not cover normal wear and tear or damage from neglect or accident. Contact the Toll-Free Help Line before returning the product.

FAQ (Frequently Asked Questions)

Q: How do I know when the light is fully charged?
A: When charging is complete, all four battery power indicator lights will be solid blue.
Q: Can I use a different USB power output for charging?
A: Yes, you can use a standard 5V USB power output such as a cellular phone power adaptor or laptop USB port for charging.

TOLL-FREE HELP LINE:888-552-8665
WWW.POWERSMITHPRODUCTS.COM

SAVE THIS MANUAL FOR FUTURE REFERENCE

PRODUCT OVERVIEW

LED Light Panel
Clamp Base
Clear Cover
Switch Button
Charging Port
Battery Power Indicator
USB Power Output
Ball Joint
Magnets
Hanging Hook
Keyhole Slot
Charging Cable

UNPACKING CONTENTS

Important! Due to modern mass production techniques, it is unlikely the product is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.

CONTENTS IN PACKAGE

IMPORTANT SAFETY INSTRUCTIONS

READ AND UNDERSTAND ALL WARNINGS, CAUTIONS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.

Always unplug the charger/adaptor from the light and power source when not in use.
Do not look directly at the lighted lamps to avoid eye injuries.
Always keep the work light away from any ﬂammable surface or materials.
Always check damaged or worn-out parts before using the work light. Broken parts will affect the work light operation. Replace or repair damaged or worn parts immediately. If repairs are needed, consult a professional electrician.
Do not use a pressure washer to clean this product.
Do not modify the work light in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the product. There are specific applications for which the work light was designed.
Store work light in a secure place out of the reach of children. Inspect it for good working condition prior to storage and before re-use.

WARNING: This LED light is powered by a Lithium-ion battery. Lithium-ion batteries are small, compact, and ideal for providing long-lasting power to this product. However, they must be used and charged properly. Improper use can result in serious injury, fire, or death.

CAUTION: This product comes with a battery installed internally. Do not attempt to remove the battery from the product.

Do not place this lithium-ion battery-powered product in fire or apply heat to it.
Do not apply strong impact or shocks to this lithium-ion battery-powered product.
Do not allow the lithium-ion battery to get wet.
Do not leave this lithium-ion battery-powered product in the direct sunlight, or use or store it inside cars in hot weather. Doing so may cause the battery to generate heat, rupture, or ignite. Using the battery in this manner may also result in a loss of performance and a shortened battery life.
NEVER THROW WATER ON A BURNING LITHIUMION BATTERY! If a lithium-ion battery does catch on fire, it will burn even more violently when contacted with water.
Store the product at temperatures between 41°F and 77°F (5°C and 25°C).
Properly dispose of all batteries at a recycling center or per local code. More information regarding battery disposal in U.S. and Canada is available at;
http://www.rbrc.org/index.html, or by calling 1-800-822-8837 (1-800-8BATTER).

OPERATION

CHARGING THE LIGHT
The light can be recharged by connecting the included USB charging cable to a USB power output, such as a cellular phone power adaptor or laptop USB port.

Make sure the light is turned off.
Lift the clear cover (3) to access the charging port (5).
Connect the USB-C (small) end of the charging cable to the charging port and connect the USB end to a standard 5V USB power output.
The battery power Indicator lights (6) will illuminate blue to display the battery power level. One of the indicator lights will be flashing if charging is in progress.
When charging is complete, all four indicator lights will be solid blue.

SWITCH BUTTON
Press the switch button (4) to turn the light On. Additional presses cycle through the light settings in the following sequence.

High – Medium – Low – Off
If the light is left on any setting for more than 10 seconds, the next press of the switch button will turn the light off.

BATTERY POWER INDICATOR
The light has a battery power indicator (6). It consists of 4 blue lights. To indicate the battery power level, power the light on. More illuminated blue lights indicate more battery power remaining.

USB POWER OUTPUT
The light has a USB power output (7) to charge other portable devices using the appropriate USB cable.

LED LIGHT PANEL
The light panel (1) swivels on a ball joint (8) for additional versatility in light positioning. It folds for easy transportation and storage.

MAGNETIC CLAMP BASE
This light features a magnetic clamp base (2) with a hanging hook (10) and a keyhole slot (11). It can be clamped to an object as thick as 1-1/2”. Refer to FIG 2 for application examples.

MAINTENANCE

WARNING: Always make sure the light is unplugged and completely cool before attempting to clean it.
Your light requires very little care and maintenance. Simply clean the lens regularly with a non-abrasive cleaner.

WARRANTY
This product is warranted free from defects in material and workmanship for 2 (TWO) years after date of purchase. This limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is covered by this warranty and it is not transferable. Prior to returning your product to store location of purchase, please call the Toll- Free Help Line for possible solutions.

HELPLINE
For questions about this or any other PowerSmith™ product, Please call

Toll-Free: 888-552-8665.

Or visit our website: www.powersmithproducts.com

©Richpower Industries, Inc. All Rights reserved
Richpower Industries, Inc.
736 Hampton Road
Williamston, SC 29697
Printed in China, on recycled paper
Richpower Industries, Inc.
736 Hampton Road
Williamston, SC USA
www.richpowerinc.com