COSTWAY GT3429 Wood Planter Box Raised Garden Bed Installation Guide

Table of Contents

COSTWAY-GT3429-Wood-Planter-Box-Raised-Garden-Bed-
product

Product Overview

Model: GT3429

This instruction booklet contains important safety information. Please read and keep it for future reference.

USA Office:	Fontana
AUS Office:	Truganina
GBR Office:	Ipswich
ITA Office:	Milano
POL Office:	Gdánsk
DEU Office:	FDS GmbH, Neuer Höltigbaum 36, 22143 Hamburg, Deutschland
FRA Office:	Saint Vigor d’Ymonville
Contact Emails:

If you’re having difficulty, our friendly customer team is always here to help.

Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.

The package includes the following parts:

A x1: Main frame
B x2: Side panels
C x1: Bottom panel
D x1: Shelf board
E x4: Screws
a (Screw size): M 6x55mm $COSTWAY-GT3429-Wood-Planter-Box-Raised-Garden-Bed-fig $1$$

$COSTWAY-GT3429-Wood-Planter-Box-Raised-Garden-Bed-fig $7$$ $COSTWAY-GT3429-Wood-Planter-Box- Raised-Garden-Bed-fig $8$$

Notice: Please pay attention to the correct direction of the installation, otherwise the accessories may not match.

Notes

Do not over-tighten screws. (Insert all screws before tightening.) Be very careful when assembling to avoid pinching your hands or fingers.

Do NOT discard the box / original packaging.
In case a return is required, the item must be returned in original box. Without this your return will not be accepted.
Take a photo of the box markings.
A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps our staff identify your product number to ensure you receive the correct parts.
Take a photo of the damaged part (if applicable).
A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged.
Send us an email with the images requested.

What should I do if I encounter difficulty during assembly?
- Contact our customer support team via the provided email addresses for assistance.
Can I return the product if it’s damaged?
- Yes, follow the return/damage claim instructions and provide the necessary photos to process your claim.
What is the correct screw size for assembly?
- The correct screw size is M 6x55mm.
How do I ensure I assemble the product correctly?
- Follow the assembly steps carefully, paying attention to the correct direction of the installation to ensure all parts fit properly.
What should I do if a part is missing or damaged?
- Take a photo of the box markings and the damaged part, and email our customer support team with the images and a description of the issue.