GE APPLIANCES GE40T08DAT 40 Gallon Tall 4500W Electric Water Heater Instruction Manual
- June 1, 2024
- GE Appliances
Table of Contents
GE40T08DAT
GE® 40 Gallon Tall 4500W Electric Water Heater
GE40T08DAT 40 Gallon Tall 4500W Electric Water Heater
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
LOCAL INSTALLATION REGULATIONS:
This water heater must be installed in accordance with these instructions,
local codes, utility codes, utility company requirements or, in the absence of
local codes, the latest edition of the National Electrical Code. It is
available from some local libraries or can be purchased from the National Fire
Preventions Association, Batterymarch park, Quincy, MA 02169 as booklet
ANSI/NFPA 70.
INSTALLATION INFORMATION: For complete information, see installation
instruction packed with your water heater.
POWER REQUIREMENTS: Check the markings on the rating plate of the water
heater to be certain the power supply corresponds to the water heater
requirements.
LOCATION: Locate the water heater in a clean dry area as near as
practical to the area of the greatest heated water demand. Long uninsulated
hot water lines can waste energy and water.
REQUIRED CLEARANCES: There must be sufficient clearance between any
object and the top, rear and sides of the water heater in the event service is
needed. The controls and drain at front of unit must have clear access for
operation and service. Installations that require minimal clearance on the
sides or rear of the water heater for earthquake straps are also acceptable.
In these cases, additional clearance should be provided on the opposite side
of the unit to allow for service access
TYPICAL TOP CONNECT INSTALLATION
Above illustration intended for dimensional reference only. Refer to
photograph for actual product appearance
FEATURES AND BENEFITS
Real Capacity – Get the most hot showers from the only water heater that
holds a true 40 gallons of water (Compared to 40 gallon electric steel tank
water heaters per DOE rated gallon capacity).
Leading Performance – Live comfortably with this best in class unit that
delivers 65 gallons of hot water in the first hour (Measured through DOE First
Hour Rating).
Household Size – Provide hot water for the whole family of 2 to 4
persons.
4500W Heating Elements – Two 4500W heating elements require 25 Amp to
operate and will increase water temperature for hot water when you need it
Inlet Tube – Replenishes water from the bottom of the tank to maximize
hot water delivery.
Easy
Set Up – Replace your old water heater quickly and easily using standard
water and electrical connections.
Anode Rod – Durable design offers long-lasting protection against
corrosion.
Drain Valve – Rust-proof construction can be counted on to provide long-
lasting service.
Adjustable Thermostat – Change temperature to your desired setting.
Warranty – 8-year limited Parts Warranty*.
Model GE40T08DAT – Diamond Gray
*See written warranty for full details
For answers to your GE Profile™, or GE Appliances product questions,visit our
website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
Listed by Underwriters Laboratories See
http://info.nsf.org/Certified/Lead_Content/
for specific model listing
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>