Dwyer E-111-A-QS Pressure Transmitters User Guide
- June 1, 2024
- Dwyer
Table of Contents
Dwyer E-111-A-QS Pressure Transmitters
Product Specifications
- Model: Series 626 & 628 Pressure Transmitters
- Output : Current output (mA) and Voltage output (V)
- Power Supply: 13-30 VDC
- Mounting Position: Pressure connection facing downward for best accuracy
- Maintenance: Not field repairable; repair or recalibration through Dwyer Calibration Services
- Caution: Do not exceed specified supply voltage ratings; not for 120 or 240 VAC operation
Product Usage Instructions
Dwyer E-111-A-QS Pressure Transmitters
For best accuracy, mount the pressure transmitter with the pressure
connection facing downward. Use suitable sealants to prevent leaks when making
pressure connections.
Maintenance
Series 626 and 628 transmitters are not field repairable but can be repaired or recalibrated through Dwyer Calibration Services.
Dwyer E-111-A-QS Pressure Transmitters
- RED: Pressure Transmitter
- BLACK: Pressure Transmitter
- [NC]: Not Connected
- SILVER: Power Supply Receiver (Shield Wire not case grounded)
Dwyer E-111-A-QS Pressure Transmitters
- RED: Pressure Transmitter
- BLACK: Common
- WHITE: +V Out
- SILVER: Power Supply Receiver (Shield Wire not case grounded)
Dwyer E-111-A-QS Pressure Transmitters
Do not exceed specified supply voltage ratings. Permanent damage not covered
by warranty will result. This device is not designed for 120 or 240 VAC
operations.
QUICK START
- Position: For best accuracy, mount with the pressure connection facing downward and use suitable sealants to prevent leaks when making pressure connections.
- Maintenance: Series 626 and 628 transmitters are not field repairable but can be repaired or recalibrated through Dwyer Calibration Services.
Current output
Voltage output
CAUTION Do not exceed specified supply voltage ratings. Permanent damage
not covered by warranty will result. This device is not designed for 120 or
240 VAC operation.
For more information, refer to the user’s manual.
Scanner
Full Manual Printed in U.S.A. 11/23 FR# 443271-55
©Copyright 2023 Dwyer Instruments, LLC
FAQ
- Q: Can I repair the Series 626 & 628 Pressure Transmitters on my own?
- A: No, these transmitters are not field repairable. Contact Dwyer Calibration Services for repair or recalibration.
- Q: What is the recommended power supply voltage for the transmitters?
- A: The recommended power supply voltage range is 13-30 VDC. Do not exceed this range to prevent damage.