Hanwha Vision TR20 Global Vision Solution Provider Instructions
- June 1, 2024
- Hanwha Vision
Table of Contents
Hanwha Vision TR20 Global Vision Solution Provider
Specifications
| Part Number | PT01-006091A |
|---|---|
| Required Tools | TR20 Torx Driver |
| Quantity of Screws | 4x |
Installation Procedure
Follow the steps below to install the SPB-VAN82W component:
- Ensure you have all necessary tools, including a TR20 Torx driver.
- Prepare the area for installation, making sure it’s clean and accessible.
- Use the 4x provided screws for securing the component into place.
Important Installation Notes
- Do not force the component into position; it should fit snugly without excessive pressure.
- Ensure the orientation of the component is correct before securing it with screws.
Visual Installation Guide
Description of the visual elements for installation guidance:
- Component Diagram
- A graphic representation of the SPB-VAN82W component, illustrating its open housing ready for installation and the position of the screws.
- Correct Orientation Indicator
- A symbol indicating the correct orientation of the component with an arrow pointing to the right.
- Incorrect Orientation Warning
- An exclamation mark inside a triangle, next to a symbol showing the component with an arrow in the wrong direction, indicating that this orientation should not be used.
INSTALLATION
FAQ
What type of driver is needed for the installation?
A TR20 Torx driver is required to secure the screws.
How many screws are provided for the installation?
There are 4 screws provided for the installation.
Is there a specific orientation for installing the SPB-VAN82W?
Yes, the component should be oriented according to the Correct Orientation Indicator, with the arrow pointing to the right.
What should I do if the component doesn't fit easily into place?
Do not force the component. Check if the orientation is correct and that the installation area is properly prepared.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>