NEBOPS200 Rambler 200W Power Station User Manual
- June 14, 2024
- NEBO
Table of Contents
RAMBLER” 200
POWER STATION
INSIDE THE BOX
- DC Output Port
- DC ON/OFF Button
- Digital Display
- USB ON/OFF Button
- USB Output Ports
- DC Input Port
- LED Floodlight
- Floodlight ON/OFF Button
- AC ON/OFF Button
- AC Output Port
- DC Power Cord
- AC Charging Adapter
SPECIFICATIONS
Battery Capacity………………………………………………….. 230.4Wh,12800mAh (18.0V)
DC 5525 Input …………………………………………………………12-24V,120W DC 5525
Ouput ………………………………………………………………………….12V, 10A max
AC Output………………………………………………… 115V, 200W, 400W surge
AC Output Range ………………………………………………100V to 120V
USB-C PD Input/Output ………………………………………………………45W
USB-A Outputs ………………………………………………………………5V 2.4A, total 4.8A
Wireless Output …………………………………………………………………lOW max
Dimensions………………………………………………………….. 9.65 x 5.35 x 2.3 inches
Weight ………………………………………………………………5 lbs
Operating Temperature ……………………………………………………..32°F -113°F (0 – 45°C)
Discharge Temperature ………………………………………………………..14°F -104°F (-10 – 40°C)
SAFETY PRECAUTIONS / MOVING AND STORAGE INSTRUCTIONS
-Read allinstructions before using the product.
– When used correctly, lithium-ion rechargeable batteries provide a safe and
dependable source of portable power. However, if they are misused or abused,
this may result in leakage, burns, fire or explosion, causing personal injury
or damage to other devices. Misusing or incarrectly connecting your NEBO
Rambler 200 may cause electric shock to users and damage equipment.
-Keep your NEBO Rambler 200 dry and away from moisture and corrosive materials. The NEBO Rambler 200 should not be used near water or wet areas such as bathtubs, showers, bathrooms, sinks, swimming pools or basements.
– 00 not expose your NEGO Rambler 200 to moisture, water, rain, or snow.
– Keep your NEBO Rambler 200 away from heat sources, including open flames,
radiators, stoves, ovens, and any other devices that produce heat.
The lithium-ion rechargeable battery used in this charging device may present
a risk of fire or chemical burn if mistreated. Do not expose to fire or
excessive temperature. Do nat expose to heat above 212°F (100°C) or
incinerate.
-in the unlikely event of leakage or explosion use sand or a chemical fire extinguisher.
– Your NEBO Rambler 200 may become warm under extended high power operation.
Do not cover, wrap, or otherwise restrict the NEBO Rambler 200 during
operation.
-0o not disassemble your NEBO Rambler 200. There are no user-serviceable parts inside. Incorrect reassembly may result in shock or fire hazard.
-Do not drop or subject to strong impacts. Do not operate your NEBO Rambler 200 if it has received a sharp blow, or has otherwise been damaged in any way.
-Do not puncture, crush or subject to mechanical shock.
QUICK START GUIDE
Scan the QR code below to access the online owners manual.
For product information and videos, visit
NEBOpower.com.
IMPORTANT: Fully charge your NEBO Rambler™ 200 before using it for the
first time.
ACTIVATE YOUR WARRANTY TODAY: Your NEBO Rambler 200 has a two-year
warranty from the date of purchase. By registering your .warranty, you will
help protect your investment and save a record of vour purchase with our
customer service team.
CHARGING YOUR NEBO RAMBLER™ 200
CHARGING YOUR Rambler 200 AT HOME:
- Connect the DC cable on the 60W AC Charging Adapter (included) into the Rambler 200 DC Input Port. Plug the AC cable into a AC wall outlet. Charging will begin automatically.
- When fully charged, the digital screen will indicate 100%. (Full charge could take up to 6 hours.)
- Disconnect cable and power off your Rambler 200.
CHARGING RAMBLER 200 IN YOUR VEHICLE:
- Plug the 12V DC Power Cord (included) into the DC Input Port. Plug the other end into the vehicles DC output (cigarette lighter). Charging will begin automatically.
- When fully charged, the digital screen will indicate 100%.
- Disconnect cable and power off your Rambler 200.
CHARGING WITH A SOLAR PANEL (Sold Separately):
- Connect the DC5525 cable that came with your solar panel to the DC Input Port of the Rambler 200. Charging will begin automatically.
- When fully charged, the digital screen will indicate 100%.
- Disconnect cable and power off your Rambler 200.
NOTE: Charging speed will vary based on a number of factors including weather, obstructions and solar panel angle and positioning.
CHARGING YOUR ELECTRONIC DEVICES
- Connect the USB cable that came with your device.
- Plug the cable into the appropriate USB Output Port (A or C).
- Press the USB ON/OFF button to begin charging your device.
- When charged, disconnect cable and power off your Rambler 200.
NOTE: The NEBO Rambler 200 USB charging feature will automatically power off after 30 minutes of inactivity.
WIRELESS CHARGING
- Place your wireless compatible device onto the wireless charging pad.
- Press the USB ON/OFF Button to begin charging.
- When charged, power off your Rambler 200.
NOTE: Make sure the device is aligned in the center of the wireless charging surface and that no gaps or obstructions are in between.
CHARGING YOUR LAPTOP
- Connect the AC power plug from your laptop (or other electronic device*) into the AC port, as shown below.
- Press the AC ON/OFF Power Button to begin charging.
- When charged, disconnect cable and power off your Rambler 200.
NOTE: Make sure the AC power plug is fully plugged into the AC port before pressing the AC Power ON/OFF Button.
*Any electronic device can be powered by the AC port, as long as it is rated at 200 watts or less.
FCC COMPLIANCE STATEMENT:
‘This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmfulinterference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
‘equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected Consult the dealer or an experienced radio/TV
technician for help.
‘Warning: Changes or modifications to this unit not expressly approved by the
part responsible for compliance could void the user’s authority to operate the
equipment.
FCC Radiation Exposure Statement
‘The device has been evaluated to meet general RF exposure requirement.
‘The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>