JOKARI PV-Strip Pro Cable Stripper User Guide
- June 1, 2024
- JOKARI
Table of Contents
JOKARI PV-Strip Pro Cable Stripper
INSTALLATION INSTRUCTIONS
**1,5 – 16,0 mm2 1,5 – 16,0 mm2
**
PV-Strip Pro
Quick and precise stripping of all standard solar and PV cables, double
shielded solar cables. With adjustable length stop from 5 mm up to 26 mm.
-
Open the closing catch and open the too
-
To unlock the length stop (1), slide the right-hand slider to the length stop, set the length stop (2) and then slide the locking slider to the right again (3).
Remove sheathing of round cable:
-
Position the suitable insulation chamber (1,5 mm2 , 2,5 mm2 , 4/6 or 10/16 mm2 ) of the cable stripper around cable, close cable stripper, squeeze with befitting pressure and turn tool a 1/4 turn to right and left.
-
Detach cable sheathing with scales slightly pressed. Finished.
Warning: Never use tool on or near live electrical circuits!
CUSTOMER SUPPORT
JOKARI GmbH & Co. KG
INST_WEB30199 0124
Abisolierwerkzeuge
Tel. +49 2599 501970
An der Vogelrute
34 Fax +49 2599 7151
59387 Ascheberg-Herbern, Germany
“[email protected] |
www.jokari.de
