US STEAM V24 Commercial Steam Vacuum Cleaner User Guide
- May 15, 2024
- US STEAM
Table of Contents
US STEAM V24 Commercial Steam Vacuum Cleaner User Guide
Add Water
- Remove grey cap and fill both reservoir tanks with tap water
- Each tank holds 1/2 gallon
Plug into Electrical Outlet
- The EAGLE PLUS™ should be the only appliance plugged into the electrical outlet
Power
Master Power Switch
It will take 10 minutes to reach working temperature
Connect the Hose
- Secure by pushing by locking the front brakes
- locking the wheels will make it easier to push the hose into the steamer
Insert the hose
- Push until you hear a “click”
Steam Control
- Unlock by pressing RED button on hose handleSqueeze trigger
Adjust Steam Pressure
- ADJUST STEAM PRESSURE PUSH BUTTON
- – Low
- – Medium (Recommended) 3- High
Hot Water Injection / Extraction
- Remove grey cap and fill bothreservoir tanks with tap water
- Each tank holds 1/2 gallon
The Extraction function injects water or a detergent into the steam using the
extraction nozzles and floor brush
Activate by pushing an holding the button on the hose handle, until the light
turns on
Increase / Decrease water injection by pushing and holding the button on
the console.
Settings: Hi / Med / Low
Vacuum
Activate the VACUUM :
- Push the button on the console OR
- Pushing the button on the hose handle
Increase / Decrease suction by holding the button on the console
GREEN – LOW
ORANGE – MEDIUM
RED – HIGH
Warning:
To use the vacuum to soak up water, remove the filter.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>