NETRAUTA FI GRAND-S LED Light Mirror Instruction Manual
- June 4, 2024
- NETRAUTA FI
Table of Contents
NETRAUTA FI GRAND-S LED Light Mirror
Product contains
Mirror installation
See page 2 for fixed installation with locking mechanism.
Technical data
Supply voltage (Pri. U): 220-240V~50/60Hz, ta=55°C max., IP44, 4000K, Max 10A
LedMirror Grand-S 500×900
Model: 123934 anod.alum.
123960 dark brass
Led voltage (Sec. U): 24Vdc
P: 22,9W I:0,96A
LedMirror Grand-S 600×700
Model: 123935 anod.alum.
123961 dark brass
Led voltage (Sec. U): 24Vdc
P: 21,1W I:0,88A
LedMirror Grand-S 600×900
Model: 123936 anod.alum.
123962 dark brass
Led voltage (Sec. U): 24Vdc
P: 24,7W I:1,03A
LedMirror Grand-S 700×900
Model: 123937 anod. alum
123963 dark brass
Led voltage (Sec. U): 24Vdc
P: 26,5W I:1,11A
This product contains an energy-efficient light source E
The light source is removable but not replaceable.
Fixed installation and installation with luminaire
Electrical connections
- When installing without europlug to mains (230V 50Hz) the electrical connections must only be carried out by authorized electrician and according to the manufacturer’s instructions.
- Ledmirror should be fixed to wall so that it can’t be accidently removed (see locking mechanism page 2)
Mounting areas
- -When installed, Grand-S ledmirror is IP44 rated and it is recommended to install in areas 2 and 3 (see attached picture)
Warranty & instructions
- Mirror has 3 years warranty. The warranty applies only to manufacturing defects. This warranty does not cover damage caused by incorrect handling and installation, incorrect use or incorrect cleaning or mechanical impact.
- For spare parts contact your retailer.
- Only clean the mirror with a cloth dampened with water and dry with a lint free cloth. Use of chemicals and abrasion can damage the mirror surface or silvering.
Mounting areas
muatoa@muatoa.com, | www.muatoa.com
