ALIGATOR Watch Pro X Men Smart Watch Instruction Manual

Aligator
Watch Pro X

Watch Pro X Men Smart Watch

Basic arrangement screens

|
---|---

Thank you for purchasing an ALIGATOR product.
Please read this manual for your new smartwatch.

Important instructions

• Handle the product and accessories carefully, and protect them from mechanical damage and dirt. Protect the product and accessories from extreme temperatures. Do not dispose of the product in a fire or expose it to temperatures above + 60 °C, there is a risk of explosion.
• The product contains a built-in battery.
• Protect the product and accessories from falling to the ground.
• The product does not contain any user-serviceable parts, never disassemble the product or accessories.
• Turn off the product on an airplane unless it is expressly permitted to use it.
• Do not use the product near explosives.
• Keep out of reach of children and do not allow them to play with the product. It may contain small parts that could cause suffocation or another injury.
• The software and hardware of the product are constantly updated.
  The manufacturer, therefore, reserves the right to change the manual and individual functions of the phone without prior notice.
  More information, instructions and video tutorials on how to set up a smartwatch can be found at http://www.aligator.cz/awprox

Controls and strap fitting

The watch is controlled by a touch screen and a button on the side. The strap of the watch can be easily put on or taken off using the lever located on each of the lugs at the bottom of the strap 3 . Push the lever and the lever will release.

Shortening the metal strap

For the links, you want to remove, use a thin tool to push out or punch out the connecting axes in the direction of arrow →    6.
Reconnect the strap by pushing the washer back into place →   7. Wearing a watch correctly

Put the watch on your wrist so that the back with the sensors fits snugly against the surface of your hand, see Fig.  4

Charging

Charge the watch before using it for the first time. To charge, use the included magnetic adapter   5 , which is attached to the contacts on the back of the watch. The magnets will hold the end of the adapter in the correct position. Plug the other end of the adapter into a suitable USB socket. The display will show the battery charge status when connected. Turning on and off
To turn the watch on / off, press and hold the button on the side of the watch 1  until the watch turns on / off. You will still need to confirm the power off on the watch display 2 2 .
Control Fundamentals
The watch display is dimmed as standard to save battery power. To activate the watch display, press button
1 . The display will darken itself after a short period of time or you can darken it by pressing button 1  . To view the function menu, slide your finger across the display from left to right → B (move backward to go back). A circular menu E E is displayed by default. To select a function, tap on the corresponding icon in the menu and tap in the middle of the display to activate it. In the settings, the menu style can be switched to a classic F line list (Settings → Style menu). Sliding your in gear across the display from right to left →, F you can scroll through the screens of each function and measurement value in turn. To quickly view messages,
swipe up from the bottom
of the main screen (swipe back the other way to go back) C.
For quick setup and overview, swipe down from the top
of thema in screen (swip back the other way to go back) A .
You can quickly switch watch modes, and adjust brightness, vibration, or start settings. Connection, battery status, and weather information are also displayed.To go back up a level in the menu, either press button 1 1 or swipe the display from left to right → .

Feature menu

B Swipe the display from left to right to select from the following functions:

| Steps Number of steps per day. tis always counted from midnight. The value is approximate and may
differ from the number of steps actually walked.
---|---
| Sleep
Displays information and statistics on sleep duration and quality.
| Heart rate – the sensor on the back of the watch is used to measure it, it is necessary that the watch
is correctly positioned on the wrist. The value is approximate, it cannot be used for medical purposes.
| Sports Measuring training activity. A variety of sports and activities are available. Select an activity and tap to start. Once the workout has started, the measurement can be paused/stopped by scrolling
the screen from left to right and pressing the button.
| Phone Telephoning function. List of recent calls, dialer option, and view contacts synced with your watch.
| Pressure Estimated blood pressure – an experimental function, the measured value may not correspond to reality and cannot be guaranteed in any way, an approximation from the heart rate sensor is used for the measurement. Cannot be used for medical purposes.
| Oxygenation Display of blood oxygenation  – experimental function, the measured value may not correspond to reality and cannot be guaranteed in any way, an approximation from the heart  tate sensor is used for the measurement. Cannot be used for medical purposes.
| Weather Current weather information (only if your phone is connected). Swipe up from the bottom to see the forecast for the next 6 days.
| Trigger Allows you to remotely control the camera shutter on your phone. Requires launching an application on the phone.
| Player Allows you to remotely control the music player on your phone. If the phone function of the
watch is activated, the sound of the song will be played directly from the built-in speaker in the watch.
| Breathing Functions of breathing exercises.
| Settings
Settings and useful features.
You can set the calling function, brightness, vibration, menu style, view technical information,
reset data and more. Also includes useful functions (stopwatch, timer and more).

Useful Features

| Select Settings from the features menu and choose one of the useful features:
---|---
| Game
2 games to pass the time.
| Stopwatch
Simple stopwatch.
| Alarm clock
Possibility to set several alarms directly in the watch.
| Timer
Possibility to set several alarms directly in the watch.
| Application
Displays a OR code to easily download the watch app to your phone.
| Phone Search
When activated, triggers a sound on the phone in snooze mode. making it easier to find the phone.

Information screens

| D  When you swipe the screen from right to left  , the information screens for the watch functions will gradually appear:
---|---
| Today Displays the number of steps, last sleep time, and time of training activity. Tap each value to view detailed information.
| Health
Displays your last heartbeat, blood pressure and blood oxygenation. Tap each value to start a new measurement.
| Weather
Displays weather information. Scroll up from the bottom to view the forecast for the next 6 days.
| Spouse Allows you to remotely control the camera shutter on your phone.
Requires launching an app on the phone.
| The Player
Allows you to remotely control the music player on your phone.
| Breathing
Functions of breathing exercise.
| Assistant
If the watch phone feature is activated, tap the icon to start the voice assistant on your phone.
| Phone
If the watch phone function is activated, the phone controls (Call history, dial pad and contacts) are displayed.

Connecting the phone

To take full advantage of all the features, you need to connect the smart watch wirelessly to the application on your phone. Download and install Da Fit to your phone:

http://plus.crrepa.com/app-download/dafit

Attention! When first starting the app, it is necessary to allow all the permissions that you will be asked for, otherwise, it will not work properly*.
After enabling all permissions, the profile page will open. Enter your, details- gender, height, age, etc. To complete the settings, press the button below with the Confirmation icon. (For more accurate records and value calculation, we recommend entering information about you according to reality).
Connect the watch to the phone:

1. In the app, tap the first icon from the left in the bottom of the screen to go open Today view    E .
2. Move the watch close to the phone and press the To Add button   7    .
3. The application displays a list of available devices.
4. Tap to select Aligator Pro X.
5. The watch will be paired. Done 🙂

Display the measured data in the phone
After pairing the watch with the phone, launch the Da Fit app and touch the first icon on the left at the bottom of the app screen. The Today screen appears with information downloaded from the watch – number of steps, sleep, heart rate record, temperature,  blood pressure, blood oxygenation, training activity record and more.
After  tapping on the card of some measured  quantity, you can also view the records from the previous days, or select the date about which you want to find out information
from the calendar. Note: data is continuously downloaded from the watch via a wireless connection, but the watch must be within range of the phone – up to several meters.
Watch settings
The watch is set using the Da Fit app on the phone. At the bottom of the application screen, touch the middle icon with the watch symbol. Now you can make all the settings of the watch, (change the watch face, alarms, and notifications and many other functions).
Watch notification settings
An important smart watch function are the notifications for incoming calls, SMS messages, messages from social networks and notification of other applications.

1. Tap the middle icon at the bottom of the app to go to the device screen    F .

2. Select Notifications   8   .

3. A list of notifications appears.
   You can activate them by tapping the switch next to the name   .

4. When the notification  is turned on, the application will ask for access permissions – it is necessary to allow access  for proper operation   8
   8 . The first time you set up, the screen for allowing access to notifications also appears. Turn on the switch next to Da Fit     6 .

Watch faces
Aligator Watch Pro X offers avery wide range of watch face designs. Several are pre-installed directly in the watch. Thanks to the app, dozens of other watch faces are available.
You can also set your own photo or image directly to the background of the watch’s dial.  Change the watch face

1. Press your finger against the touch screen until the current watch face shrinks
2. Swipe sideways to select from available watch faces.
3. Touch the screen to confirm the selected watch face.

Setting other watch faces using the app

1. Go to the device screen by tapping the middle icon at the bottom of the application and select Watch Faces.
2. The watch faces installed in the watch are displayed.
3. Select More Watch Face at the bottom of the screen. Wait a while until all are availablewatch faces are loaded (new items are added gradually)4.
4. Tap on the watch face you want to use and then tap on the Download button.
5. Watchface is then downloaded and installed, the progress is displayed on the phone screen

Setting your own image to watch the face

1. Go to the device screen by tapping the middle icon at the bottom of the application and select Watch faces.
2. Select the 5th watch face and tap the Edit button next to it   9 .
3. Use the Select Picture button to set your own photo or image as the background of the watch face.
4. You can also set your own font color and location of the information on the screen.
5. Press the Save button on the top right to save the changes and load your own watch face into the watch.

Training recording using the watch or the app
As mentioned in the Smart Watch Functions chapter, the watch allows you to record your workouts for several different sports.However, you can also record your training using the Da Fit app on your phone. In this case, the watch only serves as a step-counter and heart rate sensor and the training will be recorded directly by the phone app, including the route obtained from the phone’s GPS receiver. To start a workout in the Da Fit app on your phone, touch the first icon from the bottom left of the screen © and go to the Today screen. Tap the Outdoor Running tab and press the Start button to start the recording of the training. After the training, the training data are saved and it is possible to view the training information and route in the calendar.
Phone and music functions in the watch
Thanks to the built-in microphone and speaker, the watch allows you to make phone calls and listen to music. When activated, itacts as an advanced hands- free headset, allowing
you to answer and place calls and dial phone numbers and contacts directly on the watch.
Attention!
When you connect and activate the calling function, the music and audio playback from your phone and the voice assistant control are also redirected to the watch.
To activate and deactivate the telephoning function
In order to use the phone feature on your watch, you must first enable it on your watch and then pair your phone to your watch using the dual wireless audio connection.

1. On your watch, go to Settings in the features menu, then tap Phone to display it:
   On – the phone icon turns green.

2. On your mobile phone, in the Bluetooth settings, select Pair new device and search for AudioProX…

3. Connect to this device.

4. The phone function of the watch is paired. Done!

To deactivate the phone feature on your watch, open Settings, then tap Phone to display it: Off- The icon turns grey.
To permanently deactivate the feature, delete the Audio ProX… device from the list of paired devices in the Bluetooth settings on your phone.
Attention! When the phone function is active, the battery life will be reduced. Make calls and play music directly on your watch

• Tap the red icon to reject an incoming call, and the green icon to accept it @.
• Tap the phone icon ® to switch the phone call between your watch and phone.
• Tap the speaker icon® to adjust the volume.
• The microphone can be switched on/off using the microphone icon ®. (the phone call function is active, music and audio

from your phone will be transferred to your watch. You can also use the remote control function of the player on your mobile phone with the watch and enjoy music directly on the watch thanks to t h e built- in3 W speaker.

More features for making calls on your watch

1. Select Phone from the features menu.
2.  The telephony menu will appear M :
   • History – displays a list of recent calls – tap to call the selected number/name again.
   • Dialpad – used to manu all enter a phone number for a call.
   • Contacts – a list of your favorite contacts to call from your watch. Set up using the app on your phone.

To add favorite contacts in the app

1. Launch the Da Fit app on your phone
2. Go to the watch settings screen by tapping the middle icon at the bottom of the app    F .
3. Select Favourite Contacts.
4. Press Add and select up to 8 contacts in your phonebook. You must allow the app to access your contacts to work properly.
5. After selecting your contacts, press Confi rm, first in the top right corner and then on the main screen.
6. Contact transfer will be initiated.
7. Completion of the transfer is indicated in the application. Attention! The phone needs to be close to the watch to work properly. Depending on the environment, the range of the wireless connection can vary from units to low tens of meters.

Find your phone with your watch and vice versa
If your watch is connected to your phone, it can be easily located. Select Settings → Phone search from the watch's features menu. You can then tap the icon on the watch screen to start playing audio on the watch. If you're looking for a watch, launch the Da Fit app on your phone, go to the watch settings screen (middle icon at the bottom) and select Other → Find a device. The watch will light up and vibrate. Attention! Vibration must be enabled on the watch and the battery must not be low. Otherwise, the watch screen will only light up.
Edit personal settings and data
To edit personal information and change some other application settings, touch the icon on the right of the bottom of the screen to display the My profile screen.
Now you will be able to set, your weight, age, and other information about you, as well as your daily goal.
Water resistance IP67
The watch is designed to be waterproof to the IP67 standard. However, we strongly recommend that you avoid contacting with water to the maximum extent possible. Microscopic cracks in the seal may occur during the use of the watch due to impactor wear of the case. In this case, water may get inside watch and cause damage not covered by the warranty. Never dive, bathe or shower while wearing your watch – pressurized water or hot water could penetrate the watch and cause damage not covered by the warranty. Never press the button while the case is in contact with water, as this could cause water ingress and damage not covered by the warranty.

Troubleshooting

Alerts do not appear on the watch Please make sure you have granted Da Fit app access to notifications according to above instructions
(see chapter Notification setting). Alternatively, open the phone settings and enter Access notifications into the search box and make sure access is turned on for Da Fit.
The watch does not connect to phone
If you are unable to connect the watch to your phone, try turning Bluetooth Off and then On on your phone and/or restarting your phone. If the watch does not connect, try searching for it again in the application. If the watch does not connect, reset it – swipe from left to right on the screen watch to display the menu, choose Settings and then select Reset. Then restart the phone and reconnect the watch in the app as described in the chapter Connecting phone. The watch cannot be charged with a power bank The charging current of the watch is very small. Therefore, some power banks mistakenly evaluate the connected watch as a phone that is already charged and automatically turn off charging.
More information, instructions and video tutorials on how to set up a smartwatch can be found at http://www.aligator.cz/awprox

Safety and ecology
Built-in battery
The product contains a built-in single-cell lithium battery, which does not belong to ordinary municipal waste, it may contain substances that are harmful to the environment! After the product has reached the end of its service life, the battery can be removed and handed over for further ecological processing. Instructions for safe battery removal by user or by a qualified professional make sure that the battery is completely discharged (or let the watch fully discharge). Carefully peel off the back of the watch with a knife or chisel. Danger of injury! Disconnect the supply wires to battery or cut them with scissors one by one, to prevent a short circuit. Carefully remove the battery so that the battery is not perforated or deformed – risk of electrolyte leakage, short circuit and injury! Observe regular safety work and use protective equipment or leave it to experts!
Used electrical equipment
Never dispose of the product in normal municipal waste, it may contain substances dangerous for the environment! After use, it must be handed over to the appropriate collection point, where its recycling or ecological disposal is ensured. Ask your dealer or the municipal office, where is such place, or you can hand over the product directly
to seller or to one of the branches of ADART COMPUTERS s.r.o.  It is illegal to handle the product in violation of the above instructions!
Declaration of Conformity
Hereby ADART COMPUTERS s.r.o. declares that the Aligator Watch Pro X radio equipment type, Y32, is in compliance with Directive 2014 / 53 / EU.
The full text of the EU declaration of conformity is available on the following website: www.aligator.cz

http://plus.crrepa.com/app-download/dafit
UK I TECHNICAL SUPPORT
Do you have any question about the Aligator product?
Feel free to ask us at: dotazy@adart.cz 
ADART COMPUTERS s. r. o., Čimická 717/34, 182 00 Praha 8 I CZ
www.aligator.cz

References

• Mobilní telefony a smart příslušenství | ALIGATOR
• Mobilní telefony a smart příslušenství | ALIGATOR
• Mobiltelefonok és okos kiegészítők | ALIGATOR

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>