Merra 15 Inch 2 Light Chrome LED Vanity Light Instruction Manual
- May 21, 2024
- MERRA
Table of Contents
V20220414
INSTRUCTIONS
WARNING!
Read these instructions carefully prior to installation.
- Check for electric, gas, and plumbing lines before drilling or consult a professional.
- ALWAYS cut ALL relevant power before installing a lighting fixture and do not restore power to the line until the lamp has been FULLY installed.
ASSEMBLY
- Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction box (not included).
- Remove the canopy bolts (E) and take the mounting bracket (A) off the canopy (D).
- Connect the mounting bracket to your junction box using the mounting bolts (B).
- Make electrical connections using the wire nuts (C).
- Being careful that no wiring is left exposed, place the canopy against the mounting bracket and replace the canopy bolts.
- Fit the decorative tubes (G) onto the SMD LED light plates inside the lamp holders (H).
- Mount the shades (F) onto the lamp holders.
- Turn on your lamp and enjoy!
Contact Us
Thank you for choosing our products! If you have any questions or comments,
contact us at help@cs-supportpro.com and
we’ll resolve your issue ASAP!
For a .pdf copy of the latest version of these instructions, use the
appropriate app on your smartphone to scan the QR code to the right.
https://sp9c.com/DrtJK
HCF-4040-CH Rev. 13 Apr. 2022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>