Merra HCF-0601-BZ-BNHD-1 24 Inch 3-Light Brushed Vanity Light Instructions
- October 30, 2023
- MERRA
Table of Contents
Merra HCF-0601-BZ-BNHD-1 24 Inch 3-Light Brushed Vanity Light
Product Information
The product is a lamp fixture that requires assembly and electrical connections. It has a mounting bracket, a canopy, shades, lamp holders, and sockets for bulbs. The fixture can accommodate three E26 bulbs with a maximum wattage of 40W each. The product does not come with bulbs, but it includes wire nuts and mounting bolts. The fixture is available in two finishes: bronze (HCF-0601-BZ) and nickel (HCF-0601-NI).
Product Usage Instructions
- Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction box (not included).
- Unscrew the canopy nuts (A) from the canopy bolts (E) and take the mounting bracket (C) off the canopy (G). Connect the mounting bracket to your junction box using the mounting bolts (D).
- Make electrical connections using the wire nuts (F).
- Being careful that no wiring is left exposed, place the canopy against the mounting bracket and secure it by replacing the canopy nuts onto the canopy bolts.
- Fit the shades (B) onto the lamp holders (H), screwing them into place.
- Install your bulbs into the sockets on the lamp holders. This fixture has been rated for three E26 bulbs (not included) up to 40W each.
- Restore the power, turn on your lamp, and enjoy!
For any questions or comments, contact the manufacturer at help@cs- supportpro.com. To access a PDF version of the latest instructions, use a QR code scanner app on your smartphone to scan the QR code provided in the manual.
DANGER
Read these instructions carefully prior to installation.
- Check for electric, gas, and plumbing lines before drilling or consult a professional.
- ALWAYS cut ALL relevant power before installing a lighting fixture and do not restore power to the line until the lamp has been FULLY installed.
- DO NOT use with bulbs exceeding the recommended wattage.
ASSEMBLY
- Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction box (not included).
- Unscrew the canopy nuts (A) from the canopy bolts (E) and take the mounting bracket (C) off the canopy (G). Connect the mounting bracket to your junction box using the mounting bolts (D).
- Make electrical connections using the wire nuts (F).
- Being careful that no wiring is left exposed, place the canopy against the mounting bracket and secure it by replacing the canopy nuts onto the canopy bolts.
- Fit the shades (B) onto the lamp holders (H), screwing them into place.
- Install your bulbs into the sockets on the lamp holders. This fixture has been rated for three E26 bulbs (not included) up to 40W each.
- Restore the power, turn on your lamp, and enjoy!
CONTACT US
Thank you for choosing our products! If you have any questions or comments, contact us at help@cs-supportpro.com and we’ll resolve your issue ASAP! For a .pdf copy of the latest version of these instructions, use the appropriate app on your smartphone to scan the QR code to the right.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>