Merra PTL-5026-00-BNHD-1 1-Light Gold Modern Wall Sconce Instructions
- October 30, 2023
- MERRA
Table of Contents
Merra PTL-5026-00-BNHD-1 1-Light Gold Modern Wall Sconce
Product Information
The product is a lamp that requires assembly before usage. It has a mounting bracket, canopy, shade, decorative ring, and socket ring. The lamp holder can accommodate one E26 bulb (not included) up to 60W. It comes with wire nuts, mounting bolts, and a locking nut for secure installation. The product manual provides step-by-step instructions for assembly and usage.
Product Usage Instructions
- Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction box (not included).
- Unscrew the canopy bolts (D) and take the mounting bracket (B) off the canopy (E). Connect the mounting bracket to your junction box using the mounting bolts (C).
- Make electrical connections using the wire nuts (A).
- Being careful that no wiring is left exposed, place the canopy against the mounting bracket and secure it by replacing the canopy bolts.
- Remove the socket ring (K) from the lamp holder (H). Fit the shade (I) onto the lamp holder and secure it by replacing the socket ring.
- Install your bulb into the socket on the lamp holder. This fixture has been rated for one E26 bulb (not included) up to 60W.
- Connect the slot of the decorative ring (J) to the pole (G) and secure it by tightening the locking nut (F).
- Restore the power, turn on your lamp, and enjoy!
Note: Make sure to follow all instructions carefully and use caution while assembling and installing the lamp. If you have any questions or concerns, please contact us at help@cs-supportpro.com.
WARNING
Read these instructions carefully prior to installation.
- Check for electric, gas, and plumbing lines before drilling or consult a professional.
- ALWAYS cut ALL relevant power before installing a lighting fixture and do not restore power to the line until the lamp has been FULLY installed.
- DO NOT use with bulbs exceeding the recommended wattage.
ASSEMBLY
- Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction box (not included).
- Unscrew the canopy bolts (D) and take the mounting bracket (B) off the canopy (E). Connect the mounting bracket to your junction box using the mounting bolts (C).
- Make electrical connections using the wire nuts (A).
- Being careful that no wiring is left exposed, place the canopy against the mounting bracket and secure it by replacing the canopy bolts.
- Remove the socket ring (K) from the lamp holder (H). Fit the shade (I) onto the lamp holder and secure it by replacing the socket ring.
- Install your bulb into the socket on the lamp holder. This fixture has been rated for one E26 bulb (not included) up to 60W.
- Connect the slot of the decorative ring (J) to the pole (G) and secure it by tightening the locking nut (F).
- Restore the power, turn on your lamp, and enjoy!
CONTACT US
- Thank you for choosing our products! If you have any questions or comments, contact us at help@cs-supportpro.com and we’ll resolve your issue ASAP!
- For a .pdf copy of the latest version of these instructions, use the appropriate app on your smartphone to scan the QR code to the right.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>