Merra HCF-4042-CH-BNHD-1 4-Light Chrome LED Vanity Light with Acrylic Shades Instructions
- October 30, 2023
- MERRA
Table of Contents
Merra HCF-4042-CH-BNHD-1 4-Light Chrome LED Vanity Light with Acrylic
Shades
Product Information
The product is a lamp that comes with a mounting bracket, canopy, shades,
decorative tubes, and SMD LED light plates inside the lamp holders. The lamp
requires wiring and a junction box (not included) to be installed on the wall.
Product Usage Instructions
- Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction box (not included).
- Remove the canopy bolts (E) and take the mounting bracket (A) off the canopy (D).
- Connect the mounting bracket to your junction box using the mounting bolts (B).
- Make electrical connections using the wire nuts (C).
- Being careful that no wiring is left exposed, place the canopy against the mounting bracket and replace the canopy bolts.
- Fit the decorative tubes (G) onto the SMD LED light plates inside the lamp holders (H).
- Mount the shades (F) onto the lamp holders.
- Turn on your lamp and enjoy!
WARNING
Do not restore power to the line until the lamp has been FULLY installed. If
you have any questions or comments about the product or the installation
process, please contact us at [email protected] and we’ll resolve your issue ASAP! For a .pdf copy of the
latest version of these instructions, use the appropriate app on your
smartphone to scan the QR code to the right.
WARNING!
Read these instructions carefully prior to installation.
- Check for electric, gas, and plumbing lines before drilling or consult a professional.
- ALWAYS cut ALL relevant power before installing a lighting fixture and do not restore power to the line until the lamp has been FULLY installed.
ASSEMBLY
- Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction box (not included).
- Remove the canopy bolts (E) and take the mounting bracket (A) off the canopy (D).
- Connect the mounting bracket to your junction box using the mounting bolts (B).
- Make electrical connections using the wire nuts (C).
- Being careful that no wiring is left exposed, place the canopy against the mounting bracket and replace the canopy bolts.
- Fit the decorative tubes (G) onto the SMD LED light plates inside the lamp holders (H).
- Mount the shades (F) onto the lamp holders.
- Turn on your lamp and enjoy!
Contact Us
Thank you for choosing our products! If you have any questions or comments,
contact us at [email protected] and
we’ll resolve your issue ASAP! For a .pdf copy of the latest version of these
instructions, use the appropriate app on your smartphone to scan the QR code
to the right.