ZEBRONICS ZEB IMPACT Tower Speaker User Manual

ZEBRONICS ZEB IMPACT Tower Speaker

INTRODUCTION

Dear Customer,
Thank you for purchasing the ZEB-IMPACT Tower Speaker. Please read the user manual carefully before usage & save it for future reference.
Note: Avoid the usage of this speaker at the high temperature and high humidity environments. Avoid the self-disassembly of the product as it results in the failure of the Warranty.

Features

• Wireless BT/USB/ FM /AUX/MIC Input
• LED Display
• 13.33cm subwoofer
• Remote control
• Karaoke
• Wired Mic
• Bass, Treble & Volume Control Knob

Specifications

• Output power (RMS): 50W
• Driver size
  • Full range: 7.62cm x2
  • Subwoofer: 13.33cm
• Impedance
  • Full range: 40
  • Subwoofer: 80
• Frequency: 40Hz-20kHz
• S/N Ratio: 270dB
• Separation: 275dB
• File format support (USB): MP3
• Line input: 2ch RCA
• Max. supported memory size (USB): 32GB
• FM frequency range: 87.5MHz – 108MHz
• BT name: ZEB-IMPACT
• BT version: 4.2
• Product dimension (W x DxH)
  • Subwoofer 150 x 255 x 675 mm
• Net. weight
  • Total 5.5 Kg

Package Content

• Speaker: 1U
• Remote: 1U
• Input cable: 1U
• Wired Microphone: 1U
• QR Code Guide: 1U

Control Description

1. LED DISPLAY
2. USB PORT
3. MODE (BT/FM/USB/AUX)
4. PREVIOUS TRACK/ FM CHANNEL-
5. BASS KNOB
6. PLAY/PAUSE/SCAN (FM MODE)
7. NEXT TRACK/ FM CHANNEL+
8. TREBLE KNOB
9. MIC VOLUME CONTROL
10. MIC INPUT

Remote Control

• Power: standby ON/OFF
• Numeric Pad( 0-9): To select a particular track from the USB drive directly or to enter FM Channel frequency directly
• Vol+: To increase the volume
• Prev: To select the previous tracks in BT/USB or to Tune in FM mode
• Vol-: To decrease the volume
• RPT To Switch between available repeat modes
• Scan: To scan all FM channels available
• Mode: Mode Selection (BT/AUX/USB/FM))
• EQ: Short press to control BASS and short Press again to control TREBLE. Long Press to use Equalizer
• Play/Pause To Play/ Pause the current track. To switch next channel in FM mode
• Next: To select the next tracks in BT/USB or to Tune in FM mode
• Mute To Mute/Unmute

Instructions for Use

Button functions

1. Press the “Input” button to change the input mode (BT/USB/FM/AUX) of the speaker.
2. Short press the “Next/Prev” button to change the Prev/ Next track or channel when in BT/USB mode or FM mode respectively.
3. Long press the “Next/Prev” button to increase/decrease the speaker volume.
4. Short press the “PLAY” button to Play/Pause the track being played or Mute/Unmute when in BT/USB mode or FM/AUX mode respectively.
5. Press and Hold the “PLAY” button to Scan for the available FM channels.

General Instructions

• BT Mode:
  Switch the source to BT mode, and scan for nearby BT devices on your device. Tap on “ZEB-IMPACT” to connect.

• USB Mode:
  Insert the USB drive to the slot provided on the subwoofer. It will detect the USB and the audio files from drive will be played automatically.

• FM radio:
  Switch the source to FM mode. Press the SCAN button in the remote to scan for the available FM channels. On the Subwoofer press Play/Pause button to scan for the available FM channels. Once the scanning is done, the first scanned channel will begin to play. The next button or previous button in the remote/subwoofer can be used to change the FM channels.

• AUX-IN:
  The device can be connected to an audio device using an RCA to 3.5mm cable. Connect one end of the cable to the speaker and the other end to an audio source. The songs from the audio source can be heard through the speaker.

ISO 9001:2015 Certified Company
www.zebronics.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>