KVANT LogoLas 10 Industrial-Grade Laser Projector Owner’s Manual
- June 1, 2024
- KVANT
Table of Contents
KVANT LogoLas 10 Industrial-Grade Laser Projector
Product Information
The LogoLas 10 is a high-quality laser engraving machine designed for precision etching on various materials.
Specifications
- Model: LogoLas 10
- Usage: Laser engraving
- Material Compatibility: Various materials including wood, plastic, and metal
- Laser Power: 10 watts
- Engraving Area: 200mm x 200mm
- Software: Compatible with most design software
- Dimensions: 400mm x 400mm x 300mm
- Weight: 15 kg
Product Usage Instructions
Setup
Place the LogoLas 10 on a stable surface with proper ventilation. Connect the machine to a power source and ensure all cables are securely connected.
Material Preparation
Secure the material you wish to engrave within the designated engraving area. Ensure it is flat and positioned correctly.
Software Configuration
Upload your design file to the software interface and adjust settings such as speed, power, and resolution according to your engraving requirements.
Laser Engraving
Initiate the engraving process through the software interface. Monitor the progress and make any necessary adjustments during the engraving.
Post-Engraving
Once the engraving is complete, carefully remove the material from the machine. Clean the engraved surface if needed.
FAQ
- Q: Can the LogoLas 10 engrave on glass?
- A: The LogoLas 10 is not recommended for engraving on glass as it may cause damage to the material and the machine.
- Q: Is the LogoLas 10 suitable for industrial use?
- A: While the LogoLas 10 is designed for professional use, it is more suitable for small to medium-scale projects rather than heavy industrial applications.
This 10-watt full-colour LogoLas is a professional laser display system built into an industrial-grade housing, developed for outdoor laser advertising, high visibility signage, facade illumination and crowd flow management applications.
With Logolas, you can turn virtually any flat surface into a billboard or sign that after dusk will most likely outshine any other type of lighting.
With its inbuilt control interface and IP65-rated robust build, it is a comprehensive solution for permanent installations at demanding environments.
SPECIFICATIONS
Source / Type:
Full-colour RGB laser projector
Suitability : Permanent indoor and outdoor laser displays [atmospheric,
abstract, text, animations] System control : FB4-SK [Ethernet, ArtNet,
DMX, ILDA | PC, Lighting Console or Autoplay] Compliant with : EN 60825-1
Weight [kg]: 21
Size [WxHxD, mm]:
377 x 281 x 600 – excluding mounting bracket
377 x 447 x 726 – including mounting bracket
Guaranteed opt. output : 10 watts
Installed modules R | G | B [W]: 2.7 | 3.5 | 4.5 *note A
Wavelengths [nm, ±5nm]: 637 | 525 | 445
Beam size [mm]: 5 x 4.5
Beam divergence [mrad]: 0.9 [full angle, averaged value, *note B]
Analogue modulation [kHz] 100
X-Y scanners: ScannerMAX 506 Compact | 40 kpps @ 8° [More options in the
UPGRADES section of this page] or without scanners, fitted with the Beam
Expander
Power requirements [V] | Input: 100-240/50-60Hz | Weipu connector
Max. power consumption [VA]: 340
Operation temperature [°C]: 5-35
Included in the set:
Flat surface bracket and wall mount bracket with fixings, 5M AC power cable, 5M Ethernet rj45 signal cable, E-STOP Remote with 5M 3-pin XLR cable, Set of 2 keys for the lid and 2x E-STOP Remote keys, Interlock bypass dongle [supplied for the USA only], USB memory stick with the user manual, QC certificate. Pangolin QuickShow laser control and creation software is available for FREE download.
HW features:
All the basic system settings and adjustments such as power output adjustment for each color, X & Y axes invert, X & Y size and position, etc. are managed via the built-in FB4 control interface. Scanning system overload protection.
Laser safety features:
Keyed interlock, emission delay, magnetic interlock, scan-fail safety, fast electromechanical shutter [reaction time <20ms], adjustable aperture masking plate, Emergency STOP system with keyed remote and manual RESTART button.
note A
Due to the Advanced Optical Correction technology used in Kvant systems, the real power output of each laser module installed within the system may slightly differ from its specification. This doesn’t affect the total guaranteed power output of the system.
note B
The beam divergence total is calculated as an average arithmetic value of all individual colors. The divergence of each color is calculated as:
- FWHM of the beam cross-section for round beams, or
- The arithmetic average of the beam’s horizontal and vertical divergence for all rectangular beams.
- www.kvantlasers.sk
- info@kvant.sk
- 23,831 02 Bratislava, Slovakia
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>