KVANT Clubmax 40 FB4 IP65 Laser Projectors Owner’s Manual

KVANT Clubmax 40 FB4 IP65 Laser Projectors

Product Usage Instructions

Installation

1. Ensure the area where the Clubmax 40 FB4 IP65 will be installed is suitable for an IP65-rated product.
2. Mount the fixture securely using the appropriate mounting hardware.
3. Connect the necessary power supply following the manufacturer’s instructions.

Operation

1. Power on the Clubmax 40 FB4 IP65 using the designated switch.
2. Adjust the settings using the control panel or remote control, if applicable.
3. Ensure proper ventilation around the fixture during operation.

Maintenance

1. Regularly clean the fixture to prevent dust buildup that may affect performance.
2. Check for any loose connections or signs of wear and tear periodically.
3. Refer to the user manual for any specific maintenance requirements.

FAQ

• Q: Is the Clubmax 40 FB4 IP65 suitable for outdoor use?
• A: Yes, the IP65 rating indicates that it is dust-tight and protected against water jets, making it suitable for outdoor use.
• Q: Can I dim the output of the Clubmax 40 FB4 IP65?
• A: Depending on the model, some versions may offer dimming capabilities. Refer to the product manual for specific details.
• Q: What is the recommended power supply for the Clubmax 40 FB4 IP65?
• A: It is recommended to use a power supply that meets the voltage and current requirements specified in the product manual for optimal performance.

Introductions

• To further improve the legendary Clubmax FB4 laser projectors’ high-power range, we redesigned the housing and made it heavy-duty!
• They are far more robust and 100% waterproof, certified to IP65 standards.
• They allow the productions to use them in rainy and wet environments without worry and hesitation, letting them focus on their job.
• Fitted with KVANT Lasers’ latest technology and smart features, they are undoubtedly the best projectors for laser
• professionals on the market.
• Powerful. Robust. Versatile.
• This model is factory fitted with Motorised Dichroic Filters for quick and easy beam alignment.

Clubmax 40 FB4 IP65

SPECIFICATIONS

• Source | Type: Semiconductor laser diode | Full-colour RGB laser projector
• Suitability: Large-scale outdoor laser displays [atmospheric, abstract, text, animations]
• System control: FB4-SK [Ethernet, ArtNet, DMX, ILDA | PC, Lighting Console or Autoplay]
• Compliant with: EN 60825-1 [tested by TÜV SÜD], FDA
• Weight [kg]: 19.5
• Size [WxHxD, mm]: 265 x 179 x 395 Guaranteed opt. output 36.7 watts
• Installed modules R | G | B [W]: 8.5 | 11.5 | 20 *note A
• Wavelengths [nm, ±5nm]: 638 | 525 | 455
• Beam size [mm]: 7 x 7
• Beam divergence [mrad]: 1.1 [full angle, averaged value, *note B] Analogue modulation [kHz] 100
• X-Y scanners: 30 kpps @ 8°, max. scanning angle 50° on both axes [More options in the UPGRADES section of this page]
• Power requirements [V] | Input: 100-240/50-60Hz | Neutrik powerCON TRUE1
• Max. power consumption [VA]: 1200
• Operation temperature [°C]: 5-28 [-20 to +40 when installed in Monsoon protection enclosure with AC unit]
• Included in the set: Heavy-duty flight case, 1.5M AC power cable, 10M Ethernet rj45 signal cable, E-STOP Remote with 10M 3-pin XLR cable, Set of 4 safety keys, Interlock bypass dongle [supplied for the USA only], USB memory stick with the user

PRODUCT SPECIFICATION SHEET

• manual, QC certificate.
• Pangolin QuickShow laser control and creation software is available for FREE download.

HW features

• Motorised Dichroic Filters.
• Inbuilt 4-way apperture masking plate.
• All the basic system settings and adjustments such as power output adjustment for each colour, X & Y axes invert, X & Y size and position, etc. are managed via the built-in FB4 control interface.
• Scanning system overload protection.
• Optical bench integration slot.

Laser safety features
Keyed interlock, emission delay, magnetic interlock, scan-fail safety, fast electromechanical shutter [reaction time <20ms], adjustable aperture masking plate, Emergency STOP system with keyed remote and manual RESTART button.

note A
Due to Advanced Optical Correction technology used in Kvant systems, the real power output of each laser module installed within the system may slightly differ from its specification. This doesn’t affect the total guaranteed power output of the system.

note B
The beam divergence total is calculated as an average arithmetic value of all individual colours. The divergence of each colour is calculated as:

1. FWHM of the beam cross-section for round beams, or
2. The arithmetic average of the beam’s horizontal and vertical divergence for all rectangular beams.

CONTACT

• www.kvantlasers.sk
• info@kvant.sk
• Odborárska 23,831 02 Bratislava,Slovakia

References

• Laser light show technology

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>