Audi Home EV Charger User Guide
- June 12, 2024
- Audi
Table of Contents
Audi Home EV Charger
Product Information
The Home EV Charging Installation is a product designed to facilitate the
charging of electric vehicles at home. It is recommended by Audi for customers
to hire licensed electricians who are trained, certified, and insured to
install a NEMA 14-50 outlet on a 240 volt, 50 amp circuit for AC Level 2 home
charging. The installation must comply with local electrical and building
codes.
The product includes the following features:
- NEMA 14-50 outlet
- 240 volt, 50 amp circuit
- AC Level 2 charging
Product Usage Instructions
- What you will need:
- A trusted local licensed electrician who is properly trained, certified, and insured.
- NEMA 14-50 outlet specifications.
How & Where to Install:
The location of your vehicle’s charge port may vary based on the model. When
installing the outlet, consider the charger mounting and cable length. Plug in
your charge cable based on theorientation of the outlet’s ground pin.
Recommended Installation: Ground on top Optional Installation: Ground on
bottom
- At-Home Vehicle Charging Made Easy: Discover Qmerit for additional support.
Additional Support:
If you need further assistance or have any questions, please contact Qmerit
for additional support.
For the best EV ownership experience, Audi recommends customers reach out to trusted local licensed electricians that are properly trained, certified, and insured to install a NEMA 14-50 outlet on a 240 volt, 50 amp circuit for AC Level 2 home charging. Installation must comply with local electrical and building codes. The overview below may be provided directly to your certified installer.
What you will need
NEMA 14-50 Specifications
- Circuit Breaker 50 Amp
- Voltage
- Single Phase, 208-240 Volt, 60 Hertz
- Outlet Type High quality, Industrial Grade NEMA 14-50 receptacle
- Conductors 6 AWG recommended, Copper wires only (Upsized wiring for installations over 150 feet)
- Weather Protection Install NEMA 3R (or higher) weather resistant enclosure
- Ventilation Not required
- Service Disconnect Not required
- Ground Fault Circuit Interrupter Not required
How & Where to Install
The location of your vehicle’s charge port will vary based on model. Outlet
placement should take charger mounting and cable length into consideration.
Based on the orientation of the outlet’s ground pin, you can plug in your
charge cable accordingly.
-
Recommaended Installation: Ground on top
-
Optional Installation: Ground on bottom
Home EV Charging Installation
At-Home Vehicle Charging Made Easy
Discover Qmerit
Additional Support
Customer Support
800-822-2834
Monday–Friday, 10am–7pm (ET)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>