W-KING K6S Small Portable Karaoke Speaker User Manual
- June 12, 2024
- W-KING
Table of Contents
W-KING K6S Small Portable Karaoke Speaker
INTRODUCTION
Thank you and congratulations on your choice of W-KING K6S wireless speaker. Before using this speaker, please take a few minutes to read this manual, which includes detailed messages concerning the proper operation of the unit.
WHAT’S IN THE BOX
- Main unit ×1
- Wireless microphones ×1
- Remote control ×1
- Audio cable ×1
- Speaker charging adapter ×1
- Live cable ×2
- Charging cable ×1
PRODUCT OVERVIEW
-
Guitar Volume:
Rotate this knob to adjust the volume of the guitar or other connected musical instruments.- Clockwise: increase; anticlockwise: decrease
-
Microphone Volume:
Rotate this knob to adjust the connected microphone’s volume- Clockwise: increase; anticlockwise: decrease
-
Echo :
Rotate this knob to adjust microphone reverberation- Clockwise: increase; anticlockwise: decrease
-
Music Treble:
- Clockwise: increase; anticlockwise: decrease
-
Music Bass:
- Clockwise: increase; anticlockwise: decrease
-
EQ Switch:
Press to switch between outdoor and indoor sound mode -
Previous:
Press to the previous song track. -
Play/Pause:
Play, pause, or resume. -
Next :
Press to the next song track. -
Microphone Priority:
Press to turn on/off this function. The function is to lower the music volume when the microphone is used. -
Music Accompaniment/Center Cancel:
When you want to use the music source for Karaoke, press this button to eliminate sounds (such as vocals) located in the center of the stereo source. -
Record:
Only workable when inserting a TF card or USB storage device. -
Record: press this button to record the voice and store it in the storage device
-
Play the recording file : press and hold this button
-
Play mode: during playing, press to switch between repeat one file and play all files
-
Delete recording file: during playing, press and hold the Play/Pause button
-
Mode:
Press to toggle among Bluetooth/USB/TF card/AUX mode In Bluetooth mode, press and hold to disconnect the Bluetooth connection -
Screen:
To show the speaker status and mode FUNCTION| SCREEN
---|---
Bluetooth mode| Bluetooth icon flashes
Speaker music volume| U XX ( XX stands for volume level, 0 to 30)
Music treble level| AHXX (XX stands for volume level, -6 to 6)
Music bass level| AbXX (XX stands for volume level, -6 to 6)
Musical Instrument Volume| gt XX (XX stands for volume level, 0 to 30)
Microphone volume| UdXX(XX stands for volume level, 0 to 30)
phone reverberation| ECXX(XX stands for volume level, 0 to 30)
Microphone Priority| Microphone icon
Music Accompaniment| Music icon
Record| ”REC” flashes
Play recording
Delete record file AUX Mode
| “REC” on “DEL” on
·’AUX” on
USBrTF Mode| “UIT’ on
Sound field (on remote)| Corresponding indicator for each mode
Microphone voice change| UC- X (X stands for order number)
TWS pairing| Screen flashes
TWS disconnected| Primary Speaker: keep the same
Secondary speaker: Bluetooth icon flashes
Battery capacity| Remain capacity shows on the screen
15. Music Volume:
To adjust the speaker volume
* **Clockwise** : increase; anticlockwise: decrease![W-KING-K6S-Small-Portable-Karaoke-Speaker-FIG-2](https://manuals.plus/wp-content/uploads/2023/07/W-KING-K6S-Small-Portable-Karaoke-Speaker-FIG-2.jpg)
- Musical instrument
- Connect to guitar and other musical instruments.
- Reset
- Insert a needle to reset.
- USB storage device
- Connect to a USB storage device.
- TF card reader
- Connect to a TF card
- Live
- Connect to live device through included live cable;
- Connect another music source device with K6S, music will switch to a live device.
- Headphone monitoring
- Connect to headphones, the music will transfer to the headphone
- Press the EQ Button, both the speaker and headphones can hear music; press again to turn off the speaker music playing.
- AUX
- Connect to an external audio device through a 3.5mm audio cable.
- DC charging
- Connect to the charging adapter.
- Power Switch
- Press to power on/off this speaker
USING YOUR W-KING K6S
-
Bluetooth Connection:
Connect your W-KING K6S with Bluetooth-enabled devices. -
Power on K6S, it enter Bluetooth pairing mode automatically;
-
Choose “W-KING K6S” to connect.
-
Once successfully connected, music will stream to this speaker.
Remarks: -
Automatically turn off when there is no any connection for 10 minutes.
-
Bluetooth transmission distance may vary with the environment.
-
When turning on this speaker next time, it will reconnect to the last connected device automatically. If not, please try it manually.
-
TWS Connection
Connect 2 PCs K6S via the TWS function. -
In Bluetooth mode, press and hold the PLAY/PAUSE Button on one speaker, screen flashes to enter TWS automatically connection process;
-
After the TWS connection builds up, the secondary speaker screen and Bluetooth icon are constantly. on, the primary speaker screen constantly on. Then you can search and choose “W-KING K6S” on your mobile to connect with this TWS system
-
To exit TWS mode: double press PLAY/PAUSE Button, Bluetooth icon on the secondary speaker screen flashes
Remarks:
-
Two K6S should in the same software and hardware version. 3. Charging the Speaker
Please use included adapter to charge the speaker.-
Low battery notice: when battery capacity less than 20%
-
Low battery turn off: when battery capacity less than 10%
-
Red LED turns on during charging, turn off automatically when fully charged.
-
Live Function
Use K6S for better live show sound quality. -
Use the included live cable to connect vour live mobile and speaker live port.
-
Use another music source device (mobile/laptop etc.) to connect speaker via Bluetooth/AUX IN, you can use it to play accompaniment or other music source, then this music will transfer to live.
-
If you are using included microphone to sing and speaker, your voice will transfer to live show with the music sources at the same time.
-
USING THE MICROPHONE
K6S included one unit of high-quality wireless microphones
Pairing
- Power on the microphone
- Press and hold Pairing Button to enter pairing mode, and the microphone screen will flashes
- When the microphone screen flashes, power on the speaker, then the microphone will connect with the speaker automatically (around 5 to 10 seconds)
- Press the pairing button again to exit pairing mode, then this button will use for switch frequency.
- Once they are paired, they will reconnect to the speaker automatically
USING THE REMOTE CONTROL
Voice change
When using the microphone, press voice change on the remote, your voice can toggle among man voice, woman voice and original sound;
**Control Panel
**
SPECIFICATIONS
- Bluetooth version: 5.0
- Product size: 37.927.918.8cm
- Bluetooth transmission distance: 10 meters
- Remote control distance: 5 meters
- Speaker drivers: woofers×1, 148mm; tweeters×2, 78mm;
- Speaker driver max output: 100W S/N:≥75dB
- Frequency range: 60Hz-20KHz
- Charging time: around 4 hours
- Charging: DC 15V/1.6A
- Battery: built in lithium battery, 6pcs battery cells total capacity 3.6V/15000mAh; Battery pack 10.8V/5000mAh
- Transmission distance is tested in open space without interference.
- The above data is based on the WEIKING laboratory environment and test results; actual playtime may vary with environment and user habit, for reference only.
SAFETY NOTICE
- Please read and keep this manual for reference.
- Do not open (or modify in any way) the unit or its AC adaptor.
- Do not attempt to repair the unit, or replace parts within it. Refer all servicing to your retailer or an authorized W-KING distributor.
- Never use or store the unit in an extreme temperature, humid or dusty environment; please not expose the unit to rain or chemical materials, and it’s dangerous to put it in vibration places, please make sure it’s placed stable before using. Please avoid strong impact.
- When use by children, please make sure an adult provides supervision until they are familiar with operation methods and safe operation notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>